Remember that an eave is the lower edge of a roof which projects beyond the face of the wall. … So in summary, an eave is part of a roof system and a soffit, in that context, is part of the eave. Clearly, eaves and soffit are two different parts of the same structure.

What is the difference between eaves and fascia?

Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Fascia—A decorative board extending down from the roof edge either at the eave or at the rake.

What are the three types of eaves?

• Closed eave: An overhang with a soffit that closes and finishes the underside of the eaves.
• Open eave: An overhang with an exposed underside and visible rafters.
• Box eave: An overhang enclosed with a soffit and a build-up of ornamental molding so the rafters are no longer visible.

What is soffit and eaves?

What Is a Soffit? Your roof by necessity, will often times extend over the walls of your home. This overhang can go by a few names, such as the house eaves or the rafters of your roof. The underside of this overhang, when given a finished appearance, is known as the soffit, which means “something fixed underneath”.

What is the border around the roof called?

Eave: An eave is the lower border of the roof that overhangs the wall usually located in the first three feet of a roof.

Is a soffit necessary?

Why does my home need soffit? … Air from the soffit cycles to the vents to draw heat and moisture away from the house. Moisture is mold’s breading ground and the cause of roof rot and poor air quality. The soffit also helps keep pests from slipping into your home through the roofline or gutters and nesting in your attic.

What is the underside of a roof called?

Soffit: The underside of the eaves, or roof overhang, which can be enclosed or exposed.

Which part of the roof is the eaves?

The eaves of a roof is its lowest horizontal edge. The eaves may terminate flush with the outer face of the wall, in which case it is known as a ‘flush eaves’. It may also project out beyond the external wall, with a soffit below.

Do houses need eaves?

Eaves will also help save you time and money. … The overhang created by your eaves will direct water away from the walls and windows during the rain which means less cleaning and greater longevity in your build.

Do soffits lead to attic?

Soffit vents are roof ventilation devices installed underneath the eaves of a roof that extend past the warm wall line. When properly combined with other roof ventilation devices, soffit vents allow fresh air to enter into an attic creating air flow.

Article first time published on

What are building eaves?

The area where a roof extends a small way past the wall of a building is usually referred to as the eaves. … Eaves are formed as the rafters of the roof extend past the side of the building to distribute and support the load of the roof more evenly.

What are the 2 types of eaves?

• Exposed: The finished underside of the roof and supporting rafters are visible from underneath.
• Soffited: Includes a soffit – the panelling which forms the underside of the eaves, connecting the bottom tip of the eave with the side of the building at a 90-degree angle.

What are the different types of eaves?

The four basic types of eaves are exposed, soffited, boxed-in, and abbreviated. Eaves typically include fascia, the material used to close off the ends of the rafters from the elements. When standard gutters are used on a residential structure, they are generally attached to the fascia.

Are eaves and gutters the same thing?

is that eavestrough is a trough under the eaves of a building for draining water from the roof; gutter while gutter is a prepared channel in a surface, especially at the side of a road adjacent to a curb, intended for the drainage of water or gutter can be one who or that which guts.

What is a house soffit?

The soffit is part of the overhang where your roof meets your siding. When rain or snow hits your roof, it runs down, and the overhang allows the water to flow away from your house. The soffit is underneath the overhang, between the roof’s edge and side of your home—the bottom of the triangle, if you will.

What is the wood under the eaves called?

The bottom — or soffit — where the damage is, is typically thin plywood, usually 1/4-to-3/8-inch-thick. It’s cut in long sections and butt-jointed together with a thin piece of plastic molding that slips over both ends forming a joint.

What is the end of a roof called?

A hipped roof has only two hipped ends. Gable end: The gable end of the roof is the edge of a roof above the gable. Eave: This is where the roof hangs over the edge of the exterior wall.

What is soffit slab?

Soffit Slab consists of a non-combustible rigid ROCKWOOL® board with a variety of facings and is particularly suited for providing cost effective fire resistance and thermal insulation through concrete car park soffits and similar applications.

What's the difference between soffit and fascia?

An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.

What is the purpose of a roof soffit?

Functionally, the basic mission of soffit is to protect rafters from the elements. Keeping moisture away from the rafters reduces the chance of mold, and helps preserve the life of the materials. Aesthetically, soffit is an easy way to add character.

Should my soffit be vented?

A roof may need soffit vents if there is no other ventilation allowing for adequate air movement. However, if the attic space is properly sealed and insulated, there is no need for this type of ventilation. There is no question that a standard attic space should be vented.

Can you paint soffit?

Paint the horizontal section of the soffit first, then apply paint to the sides and faces of any corbels or other decorative elements. Don’t forget to paint the backside of any vertical boards or fascia that trim the soffit. You won’t see these rear surfaces, but they need the protection of the paint.

What causes soffit damage?

The most common causes of soffit and fascia damage are water and sun exposure. Being exposed to these elements for long periods, soffit and fascia boards may end up with wet or dry rot.

Can you add eaves to an existing roof?

A roof overhang protects the building under it from rain and weather, and if your house doesn’t have one, adding an overhang is not an especially difficult construction job. Framing a new overhang is straightforward, but blending the new overhang seamlessly into the existing roof requires some effort and expense.

What is the benefit of eaves?

Moisture and leakage protection By directing the water away from the walls and foundation of your home, eaves offer protection from water damage, mud splatter, mould and mildew. This protection leads to greater longevity in your build and reduces the need for leakage-related repair.

Where are eaves on a house?

Eaves are the edges of the roof that extend over the side of a building and overhang the face of the wall.

What are eaves on a flat roof?

For the purpose of measuring height, the eaves of a house are the point where the lowest point of a roof slope, or a flat roof, meets the outside wall. The height of the eaves will be measured from the ground level at the base of the external.

Where do the eaves start?

2.5 The “eaves” of a house are the point where the external walls, if projected upwards, meet the lowest point of the upper surface of the roof (see paragraph A.

Should soffits have air vents?

Soffit vents are required to cool the attic space and help circulate air from outside. The general rule of thumb for the amount of soffit ventilation required is to have at least one square foot of ventilation for every 150 square feet of attic space.

What is the purpose of soffit and fascia?

Soffit & Fascia Provide: Protection for your rafters and eliminates the possibility of structural damage that could cause you to have to replace your entire roof. Lower heating bills which will help you and the environment.

What is vented soffit?

Ventilated soffits are perforated with tiny holes that help air pass in and out of your attic space. Combined with a fan, ventilated soffits keep air flowing in the area you need it most. And they do it quietly and unobtrusively so you don’t have to hear or see the venting happening.