While AdvanTech subflooring is engineered to withstand extensive water exposure with a 500-day No Sanding Guarantee,¹ you can take extra measures to protect your material if prolonged frozen, wet or dry cycles are anticipated when the wall framing isn’t up yet.

Can AdvanTech get rained on?

AdvanTech can sit in the rain for months and not swell at all. This product is truly a ground breaking product for the building industry.

Can AdvanTech be used outside?

AdvanTech panels can be left natural, stained, varnished or painted with oil or epoxy based paints or oil based primer and latex paint. Water seal is not recommended. AdvanTech panels are not recommended for exterior siding or other applications that are permanently exposed to the weather.

How long will AdvanTech last outside?

It can be left outside for 6 months or something like that without sanding -alot stronger than 3/4″ plywood, in both fastening holding and spans I even started using on theater stages due to water resistance (just needs oil based primer) HAve to make sure you get Advan tech, found out the hard way other brands look the …

Is AdvanTech better than treated plywood?

AdvanTech is a highly dense engineered wood. … And its dense composition means nails/fasteners hold better than they do with plywood or OSB. To protect against warping or swelling from water or other moisture, moisture-resistant resin is applied to every strand of wood that goes into the flooring.

Is it OK for subfloor to get wet?

Most of the time, however, a little rain and snow will not damage the subfloor. If at all possible, you should ensure that the subfloor is at least swept off after a rain or snow storm to help prevent damage to the subfloor. You may even want to use a wet-vac to remove as much of the water as possible.

How long can AdvanTech stay wet?

AdvanTech subflooring is engineered to withstand water exposure with a 500-day no sanding guarantee.

Can AdvanTech subfloor be painted?

Can I paint AdvanTech panels? AdvanTech panels can be left natural, stained, varnished or painted with oil or epoxy based paints or oil based primer and latex paint. Water seal is not recommended. AdvanTech panels are not recommended for exterior siding or other applications that are permanently exposed to the weather.

Is AdvanTech a plywood?

AdvanTech® flooring is a high-performance engineered panel designed to replace plywood and commodity oriented strand board (OSB) floor sheathing. … AdvanTech flooring is nailed or screwed to floor framing members; long edges are precision tongue-and-groove, and the panel surface is fully sanded.

Can they frame a house in the rain?

Your framing lumber and the oriented strand board (OSB) are going to be fine. The glues used to make OSB are water-resistant because the manufacturers know that virtually no one can build a home that won’t get wet before the roof and siding is applied.

Article first time published on

What is the difference between OSB and AdvanTech?

I was soon to learn that there’s a big difference between AdvanTech panels and other subflooring options. Commodity OSB uses glues and a process that permits the panel to soak up moisture. … While plywood gives you a more consistent panel, it is still prone to wicking moisture. Questions on AdvanTech subfloor assemblies?

Where is AdvanTech made?

Manufacturing. Advantech complements its design strengths with three world-class production centers in China and Taiwan that are fully capable of meeting all your manufacturing needs.

How do you waterproof a subfloor?

Caulk any seams where two pieces of plywood are butted together. Dab caulk onto nail or screw heads to seal the potential leak point they provide. Caulk any splits in the wood or any other areas that may provide a point for water to seep under the subfloor.

What wood is best for subfloor?

Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

What is better for flooring plywood or OSB?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

Is AdvanTech OSB board?

There’s plywood, there’s OSB, then there’s AdvanTech® panels. From the creators of AdvanTech® flooring, comes AdvanTech® sheathing. Engineered with the same moisture-resistant resins to protect against the damaging effects of weather during construction and over time.

How do you keep a subfloor dry?

Place as many fans as possible in the room so that the air is circulated in the entire space. If there is access to the flooring from a lower level, be sure to place fans there, as well, pointing to the damaged areas. The fans must also be set at high levels and left on until the subfloor is completely dry.

How much does zip R cost?

While ZIP can be $16-$26 per sheet, leaving you with $2,800-$4,700 for the whole house. Aside from cost, there are also other factors to take into account when debating which type of sheathing will be better for you.

How long does it take to dry out subfloor?

If your subflooring is undamaged and the affected area is dry within 24 to 48 hours, you may be able to repair the damaged flooring. Before attempting a repair, ensure the floor is completely dry. Use wet vacuums to clear big water puddles, and set up fans and dehumidifiers to dry out the rest of the moisture.

How do I know if my subfloor has mold?

Even if you have access to professional moisture detection meters, subfloor mold can be difficult to discover. Perhaps the easiest means of detecting a subfloor mold problem are seeing discoloration on vinyl flooring, warping or distortion in areas of flooring, or the presence of malodors.

How long can particle board flooring be left exposed to the weather?

As soon as particleboard flooring has been fixed it should be protected from the weather. If this is not possible it is recommended that the flooring not be left uncovered for more than 3 months.

How far can AdvanTech span?

Performance CategoryPanel Size[3]PS-2 Span Rating19/32″ Panel4′ × 8′20 OC23/32″ Panel4′ × 8’24 OC7/8″ Panel4′ × 8’32 OC1″ Panel4′ × 8’32 OC

How thick is AdvanTech flooring?

AdvanTech sheathing panels are offered in three thicknesses (1/2″, 5/8″, 23/32″) for a wide range of conditions. All panels are available in nominal 4 by 8 foot sheets†† with square edge profiles, and a tongue and groove edge profile is also available in the 5/8″ thickness.

What is the best plywood for flooring?

Interior plywood is ideal for rooms not exposed to moisture, such as bedrooms, and makes a good subfloor for carpeting, tiles, vinyl, engineered wood laminate flooring and hardwood flooring. Exterior plywood is a better choice for bathrooms, kitchens and any other rooms exposed to water and moisture.

What happens if it rains while building a house?

In fact, many experts say that exposure to rain isn’t a problem at all during home construction. Lumber that’s exposed to rain during a home construction project is unlikely to sustain any serious damage from rot or mildew development, but there are still some issues that can come up as a result of exposed framing.

What happens if framing lumber gets wet?

Water makes wood swell. And the problem with using damp, swollen lumber for the frame of your house is that the lumber will eventually shrink back towards it normal size after the house is complete and the heating and cooling systems have run for a few months.

Do construction workers work in the rain?

If the rain is light and will pass quickly then workers will work through the rain. If there is welding involved, work may get canceled or postponed until later in the day. Under all circumstances, if there is lightning present, work is canceled.

Can you lay tile over AdvanTech?

Note: Do not install ceramic tile directly to AdvanTech subfloor panels. An approved underlayment must be installed over AdvanTech subfloor panels prior to ceramic tile installation.

What is underneath a subfloor?

Underlayment is an optional layer that is less about structure than about providing a smooth, consistent surface for the floor covering.

What screws to use for subfloor?

Most construction experts use 3-inch steel screws for plywood subfloors. To find out which length of screw you’ll need, you first have to know how thick the flooring is. You’ll want the screw to go about an inch past the plywood into the joist or underlying layer beneath it.

Is OSB subfloor waterproof?

OSB is strong and water-resistant. Every single fiber or piece of wood in an OSB is saturated with a cocktail of resins designed to provide superior strength and waterproofing to the finished product. … This type of board is an excellent material for use in waterproofing systems, be they roof, sub-floor or wall.