Fixing fence posts into concrete is the most common way to erect fencing, but drive-in metal post spikes provide a sturdy alternative that is suitable for many domestic fencing applications.

How do I put Spike on my Iphone?

Select your signed Spike ipa file located in the Re-Signer folder and press the Open button. Xcode will now begin Spike’s installation process. This should not take more than 10-15 seconds to complete. Once the installation process is complete you’ll see Spike’s icon on your installed apps list.

What are post anchors?

Securely attach posts to a deck surface or mount posts on a concrete floor with the incredible strength of Post Anchors.

How do you put a metal pole in the ground?

Fence posts are installed in the ground so that wood or metal fencing such as chain link can be attached. Used around homes, farms and commercial properties, fences can keep animals in an area or unwanted visitors out. Metal fence posts are typically round and 3 to 4 inches in diameter.

What is a Met post?

Metpost is Britain’s leading brand of fence post supports and fencing accessories. … Metpost products can be used to erect new fencing but are also ideally suited when repairs are needed to existing fences. Metpost products come in a range of sizes and are either galvanised or in a paint finish.

How do fence Post Spikes work?

To use them all you need to do is quite simply drive them into the ground where you will pace your fence post. Once in place they can be driven into the ground with a proprietary driving tool and a sledgehammer, after that you just need to check they are straight with a spirit level.

What are tire spikes?

A spike strip (spike belt, traffic spikes, tire shredders, stingers, stop sticks, Stinger or formally known as a tire deflation device) is a device or incident weapon used to impede or stop the movement of wheeled vehicles by puncturing their tires.

How deep should a fence post be?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.

Can you use fence post spikes for pergola?

This size would be suitable for fences in most conditions – except in really exposed areas. It is also a good size for pergolas and washing lines. Again we would recommend that you use the longer 750 mm spikes in light sandy soils or for taller posts – higher than 4 feet (1.2M).

How do you install fence posts without cement?

1. Find a concrete surface and lightly tamp your digging iron against it. …
2. Remove the turf and topsoil from the site of the post. …
3. Dig the hole putting the displaced earth onto the tarp. …
4. Pour 4 inches of gravel into the hole.
5. Place the post in the hole. …
6. Add another 2 inches of gravel around the base of the post.

Article first time published on

How do you install wood fence posts without concrete?

Backfilling the fence post hole with gravel is another common alternative to using cement. Start with a hole about the size of the one you’d dig if you were using cement, insert a third of the post’s length into the hole, and then fill with crushed gravel, tamping every five inches until flush.

Is there a spike app?

Spike is available for Microsoft Windows, MacOS, iOS and Android, and as a web version, and works with Gmail, Outlook, Exchange, iCloud, Yahoo! Mail and IMAP email providers.

Is Spike email safe?

We treat all data with the highest sensitivity and security to ensure that user data is protected. We protect your data from the moment you enter Spike. From login to encrypting data sent and received over Spike, we take extra measures to make sure no one can access your data.

Is Spike email secure?

Data is encrypted on Spike’s servers using the AES-256 algorithm. Supports email providers that use the OAuth protocol (like Google, Yahoo, and Microsoft) as well as providers that use an App Specific Password (like iCloud).

How do I get rid of Brabantia ground spikes?

Dig around it a little then drill holes in either side about 3cm down and slide a metal rod through (something like a large screwdriver) then spin it to dislodge it whilst slowly pulling it upwards. Just removed one myself this week.

How do you remove ground spikes?

When the spike is stuck in the timber instead of the ground The solution is to whack the spike back and forth (swing the sledge hammer parallel to the timber’s length) to break the wood around it, then pull it out. Pounding it back through the timber might also work.

Do you need concrete for metal fence posts?

You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.

Can you reuse fence posts with concrete?

Pulling up an existing fence post to reuse can be quite a task. … Posts with concrete at the base are the most difficult to remove and reuse because the concrete base is larger than the post, which makes pulling it up through the ground much harder.

How do you dissolve rotted wood?

Fill two beakers with equal parts acetone and water. Add water to one beaker and acetone to another. Pour the acetone into the water and stir them up gently by hand to mix them together. Add the mixed solution to the ionic liquid in the glass beaker.

How do you use a Metpost driving tool?

Place timber post into box of spike and tap home right to the bottom and tighten the bolts until secure. Locate a panel into the Metclips and fasten with galvanised nails. Drive the second Metpost Post Support into the ground at the opposite end of the panel and repeat steps 2-6, erecting your fence as you go.

Who makes Metposts?

Continuous investment in its brand and its people are top of the agenda at Exmet, the new owners of Metpost, the UK’s top brand of fence post supports and accessories.