When cutting apertures or drilling into Multipanel®, a 2mm clearance gap should be left around all edges, and sealed with silicone sealant. Multipanel® Panel adhesive and sealant are available to order from your distributor or local showroom. Once installed, your Multipanel® requires minimal maintenance.

Can you cut Multipanel?

Measure and mark your required cutting line. When using an upward cutting blade (jigsaw) or a circular saw, panels should be cut face down to avoid chipping. When using a fine-tooth blade handsaw, panels should be cut decorative face up.

How thick are shower wall panels?

How thick are shower panels? Shower panels are thicker than traditional bathroom wall panels as they have to be more rigid in construction. This has the added benefit of being stronger. Most shower panels are 10mm or 10.5mm in thickness.

Can Multipanel be cut to size?

Yes, individual planks, tiles or sections can be cut out and replaced using double-sided tape. How do I cut Multipanel bathroom flooring? Score the face firmly with a Stanley knife against a straight edge, and snap apart.

How do you cut a multipanel?

Measure and mark your required cutting line. When using an upward cutting saw blade with a fine tooth or a circular saw, panels should be cut from the back, decorative face down to prevent chipping of the surface. When using a fine-tooth blade hand-saw, panels should be cut decorative face up.

What is multi panel made of?

These wall panels are made of 9mm waterproof plywood core with a high pressure decorative laminate bonded to the face. With gloss or textured finishes, we offer a range of natural stone, precious stone and marble effects.

Which shower panel is best?

Reinforced PVC shower panels are a great option. Acrylic Shower Panels: Although these are more expensive option that PVC or solid core panels, they look brilliant (and are often used to mimic glass panels), come in a wide range of finishes and colours, can be cut in situ.

How thick are acrylic shower panels?

What are acrylic shower walls? Grout free shower wall panels made of acrylic are available for residential or commercial bathrooms. These wall panels are 3/8” thick, not difficult to cut and come in smooth, subway tile and stone tile looks for the appearance of real tile – without grout joint maintenance.

How thick should wall panels be?

In general, plywood and most hardwood paneling is 1/2- or 3/4-inch thick. Other thickness are slightly different, measuring 11/16, 9/16 or 5/8 inch thick. MDF is usually the thinnest paneling available, about 1/4-inch thick. Thicker hardwood panelings that are more than 1 inch thick are also available.

What size do shower wall panels come in?

Most panels come in lengths of 2600mm. You generally only have to worry about the width. Panel width can range from 200mm up, but often standard shower wall panels are 250mm. Bigger width panels such as 1000mm (1m) wide are easier to install as they cover more in one go, but are generally more expensive.

Article first time published on

What do I need to know about shower panels?

Shower panels are essentially really, really big shower heads. They take the place of your existing shower head, but are a literal panel that’s usually several feet tall and at least a foot wide, with multiple shower heads and body sprayers built into the surface or extending from the top or sides.

What do you put behind shower panels?

Install cement board behind tub and shower enclosures. Install cement board or an equivalent moisture-resistant backing material on walls behind tub and shower enclosures composed of tile or panel assemblies with caulked joints.

What are the different types of shower panels?

• PVC or Plasticized Polyvinyl Chloride Panels. These panels are synthetic thermoplastic materials widely used to emulate original products. …
• Unplasticized Polyvinyl Chloride (uPVC) Panels. uPVC is a rigid and less volatile panel material. …
• Acrylic Wall Panels. …
• Laminated Wall Panels.

Where is Multipanel made?

Responsibly Sourced Materials All of our plywood collections are manufactured in the UK using Forest Stewardship Council® (FSC®) C128180 certified materials and they are 100% recyclable.

Can Multipanel be painted?

Compatible with a wide variety of finishes including texture coating, acrylic paints, 2 pack painting, laminates, timber veneers, fibreglass, stonework, tiling and various metal finishes.

Can you put wet wall panels over tiles?

Can you put bathroom wall panels over tiles? Yes, you can install wall panels over your existing tiles. … While tiles are waterproof, panels are completely water-resistant owing to their PVC finish or laminate coating. This also protects your walls from a build-up of condensation, which can lead to mould and fungus.

What is the best adhesive for paneling?

Decorative paneling and tile boards can accent a space in your home, and can easily be installed with a construction adhesive. To get the job done, we recommend using LIQUID NAILS® Heavy Duty Construction Adhesive (LN-903).

What is the best cement board for shower walls?

Styrofoam backer board is extremely lightweight, and it’s strong and waterproof. It’s also easier to cut than other backer boards, and it’s dust-free. It’s ideal for wet areas like the shower walls or floor.

Can shower panels be cut to size?

Shower wall panels are super easy to install by anyone who is DIY competent. Simply cut the Showerwall panels to size and fix them to the wall or over existing tiles.

What is the wall panel size?

MaterialWoodFinish TypeMattePanel Wood TypePine PanelSize12mm X85mm X 1200mmShades12 Shades

How thick do wooden walls need to be?

70mm thick walls are required for timber buildings that will be used all year round. If you’re planning to spend time in a timber garden building regardless of the weather, 70mm timber is ideal – it’s dense enough to keep in the heat even when it’s snowing, sleeting or hailing outside.

How thick is beadboard paneling?

Bead board is usually made from ¼” to 3/8” thick plywood or MDF. It is grooved with a bead or “V” groove at repeating distances such as 2” or 4” on center, etc. Wainscoting is a decorative panel, available in different materials, thicknesses and patterns.

How thick should wet wall panels be?

Typically, acrylic wet wall panels are just 4 to 5 mm. thick.

How thick are Corian shower panels?

Shower and tub surrounds are usually made from 1/4″ solid surface material, but 1/2″ material can just as easily be used, it’s just not as flexible and heavier.

How thick are Onyx shower panels?

Onyx wall panels are available in any height, color, and design. Panels are available in Gloss, Matte, Stone Tile, Subway Tile, and Wavy Tile finish. An Onyx panel is approximately 5/16″ thick and is a solid color throughout.

How thick are aqua panels?

Aquaclad is a 10mm thick PVC waterproof panel that takes on the finished appearance of tiling.

What size is a wet wall panel?

Q: What panel sizes are available? A: Wetwall can manufacture panels up to 60”X96”. 30”,32”,34”,36” X 60”, 72” and 96” panels are the common sizes for wet applications.

Are shower panels any good?

The benefits of shower wall panels: Furthermore, shower wall panels provide a flawless finish. What’s more, shower wall panels are waterproof and far more hygienic compared to their counterparts – because they eliminate all problems associated with grout such as mildew and mould that come with tiling.

Can you cut Maax utile?

Can Utile wall panels be cut? No. Utile wall panels can be pierced to add faucets and accessories, but they cannot be cut to change the dimensions of the wall panels or cut to fit around a window.

Do I need drywall behind shower walls?

The short answer to the question is, “It’s not recommended.” However, this answer only really only suffices if you’re converting a room that was never a bathroom into a wet space. Drywall on its own is not suitable for use in bathrooms because it is prone to absorbing moisture and thus losing structural integrity.

Do you put drywall behind a shower surround?

Fiberglass and acrylic tub and shower enclosures come with a flanged edge that attaches directly to the wall studs, and the proper way to hide this flange is to install drywall over it. Consequently, enclosures are typically installed on the bare studs.