Green boards are often required by local building codes to be used as a backing for tiles and wall panels in areas that are exposed to moisture; this includes bathrooms, laundry rooms, and kitchens. However, they are not allowed for use in parts of the home that have excess humidity, like near indoor pools.

What can I use for laundry room walls?

• Metal Siding. Seize the opportunity to try the unexpected in the laundry room and install a blend of corrugated and flat metal siding panels. …
• Wood-Look Tile. Enjoy the look of wood, but avoid the upkeep, with wood-look tile. …
• Tile. …
• Latex Paint.

What is purple drywall?

National Gypsum has developed Purple drywall that is moisture, mold, and mildew resistant. This means less water and mold damage in homes keeping construction debris from landfills. In addition, within the line of Purple drywall products, are sheets that stand up to abuse and impact.

What is moisture resistant drywall?

Moisture-resistant drywall is a more durable alternative to standard drywall. It’s made of compressed gypsum core like regular drywall, but it offers a thicker coating of paper that’s covered with wax for water resistance.

What is Blueboard drywall?

Blue board drywall is also known as plaster baseboard. Blue board is used for veneer plastering, and the surface paper has special absorption qualities. It has a high water and mold resistance and there are fewer steps involved in veneer plastering. Blue board drywall is not made for mud, tape, or paint.

How do I make my garage laundry room nice?

Increase lighting to brighten up the laundry area in a dark or windowless garage and add under-cabinet LED lights over the countertops. Built-in laundry hampers will keep dirty clothes out of sight and reduce a cluttered feel in the garage.

How many receptacles are required in a laundry room?

Section 210.52(F) requires at least one receptacle outlet to be installed for the laundry in a dwelling unit. Two exceptions appear immediately after this general rule.

How much does it cost to finish a laundry room?

The average laundry room remodel cost is $6,000, but can range between $800 and $12,000, according to Fixr. This includes the cost of mid-range upper and lower cabinets, laminate countertops and front-loading appliances in a 35-square-foot room.

How much does it cost to drywall a laundry room?

TaskService ProviderBasic Cost RangeRepair Wall DamageDrywall and Plaster Contractor$201 – $340Install CabinetsFinish Carpenter$132 – $220Install Trim MoldingFinish Carpenter$5.40 – $9.41 per linear footInstall Door KnobFinish Carpenter$110 – $191 per door

How do you cover exposed pipes in a laundry room?

The best ways to hide exposed pipes on a wall are to cover them with large items such as bins and baskets, build a wall shelf in front of them, or use pipe covers to conceal them. You can also box in the pipes with trim or cover them with fitted pipe covers.

Article first time published on

Is purple drywall better than Green?

What’s the difference between PURPLE drywall and traditional green drywall? Traditional green drywall (also known as greenboard) is only moisture-resistant. PURPLE drywall, manufactured only by Gold Bond Building Products, is superior because it offers moisture, mold and mildew resistance.

What is green board drywall?

Green board is a general term for drywall that can withstand high moisture or humidity. Although it is being phased out in modern construction, you might still come across it or need it for a project around the house. Green board is easier to install and less expensive than cement board alternatives.

What's the difference in sheetrock and drywall?

Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.

What kind of drywall is mold resistant?

Green drywall is a type of drywall that’s mold resistant and is used in applications where moisture can be an issue—so most commonly, bathrooms.

What is XP drywall?

XP® Gypsum Board was designed to provide extra protection against mold and mildew compared to standard gypsum board products. The face paper is folded around the long edges to reinforce and protect the core, and the ends are square-cut and finished smooth.

What is the best drywall for moisture?

Specially treated gypsum panels are a good choice for bathroom walls and other damp areas–but don’t use them in shower enclosures or other very wet spaces. Moisture/mold-resistant drywall has a distinctive green face paper and a darker, moisture-resistant backing paper.

Is Blueboard better than sheetrock?

The main advantage of regular drywall over blueboard is that the special veneer plaster hardens so well it resists dings, scratches, and holes. The appearance of the finished blueboard is far superior to that of drywall. The overall wall is smoother, the finish is more evenly toned, and the joints are less noticeable.

What is the difference between sheetrock and Blueboard?

Drywall panels are covered with paper that will take paint directly, once they’ve been taped and the joints and fasteners have been covered with compound. Blueboard’s more absorbent paper layer is designed to bond with a veneer plaster coating before it’s painted.

What is the difference between green board and blue board drywall?

Blue board and green board are both designed for use in applications where regular drywall wouldn’t be sufficient. Blue board is for walls that will be finished with veneer plaster. The other specialized wallboard product — green board — is intended for use in areas that will be regularly exposed to moisture.

Do washers need GFCI?

The NEC doesn’t require GFCI protection for clothes washing machines specifically, but it does for “Laundry Areas.” … If the answer is “yes”, then you have your answer- the clothes washing machine will be GFCI protected, because all 120-Volt receptacles are to be GFCI protected in laundry areas, per the 2017 NEC.

Do laundry rooms need GFCI?

GFCI Protection The NEC requires GFCI (ground-fault circuit interrupter) protection for all standard receptacles serving laundry areas. This includes the 20-amp designated receptacle for the washer (and gas dryer, as applicable) and any general-use receptacles.

Is a GFCI required for a washing machine?

There is no specific requirement in the NEC for the washing machine itself to have GFCI protection. … However, depending on the location of the receptacle outlet itself, GFCI protection may be required.

How can I make my laundry room bigger?

There are certain ways that a small laundry room can be decorated to make it appear bigger and more attractive. Don’t paint the walls of a small room a dark color. Instead, paint them a lighter color to make the space appear larger. Choose a cool toned color in the room to help make it look larger.

Is it OK to put a washer and dryer in the garage?

Sometimes the garage is the best place for your washer and dryer. Generally, there is no problem with installing your washing machine in the garage. In fact, the concrete floor is perfectly suited to an appliance that may leak a little water here and there.

Can I build a laundry room in my garage?

Building a garage laundry room is a great way to make the most of the space in your garage. … Many modern floor plans overlook the need for a generous laundry room. Even if you only use one corner of your garage, you’ll have ample space to work with.

How much would it cost to drywall a $1500 sq ft house?

Average Cost to Drywall a House by House SizeCost to Drywall a 1000 sq ft HouseTotal CostAverage x 4140$9,150High x 4700$14,800Cost to Drywall a 1500 sq ft House

How much do I charge to hang drywall?

People typically charge about $1,800, or between $955 and $2,550 to hang drywall. Low-end jobs can run about $450 while high-end jobs reach $5,000 or more. That means you should charge between $1 and $3 per square foot for materials and labor for an average project.

How much does it cost to have someone mud and tape drywall?

The average cost to tape and mud drywall is $0.35 to $1.10 per square foot, not including sanding or the final finish to prime the surface for paint. Taping and mudding drywall joints for a standard 12′ x 12′ bedroom costs $180 to $580.

Should a laundry room be vented?

When a home remodel is in the works and it includes the laundry area, you’ll have to build in laundry room ventilation. Building codes require vents for dryers to take out the excessive heat and humidity, along with any combustion gases associated with gas dryers.

Do laundry rooms add value?

While it’s true that remodeling an existing laundry room won’t really do much for your home’s financial value, if you do not have a first-floor laundry room today, you may be disappointing potential buyers and detracting from your home’s value.

How much does it cost to turn a closet into a laundry room?

Closet Laundry Room Converting a closet to a laundry room ranges from $2,380 to $6,600. In addition to new washer dryer hookups, you will also need to install outlets, which range from $150 to $185. If you want new appliances, you’ll need to budget $275 to $1,300 per machine, depending on their quality.