Broken yellow lines indicate that you may pass if the broken line is next to your driving lane. Two solid yellow lines indicate no passing.

What does single solid white line mean?

A solid white line between lanes of traffic means that you should stay in your lane unless a special situation requires you to change lanes.

What do the wavy lines on British roads mean?

These zig-zag lines indicate to United Kingdom motorists that they are approaching a pedestrian crossing. It is an offence to stop a vehicle within the lines except when stopping for pedestrians using the crossing.

What does the solid Centre line mean?

Solid lines mean that crossing the solid line to pass or change lanes is not permitted.

What does a blue line on the road mean?

” … Blue as it applies to a pavement marking is exclusively reserved for the background color in the international symbol of accessibility parking symbol (see Figure 3B-22) and for the supplemental pavement marking lines that define legal parking spaces reserved for use only by persons with disabilities as provided in …

Is it legal to cross a single solid white line?

You are not permitted to overtake another vehicle where you must cross a Single Solid White Line to do so unless: You need to cross the line to avoid a hazard or obstruction. You are obeying a traffic control device.

Is it illegal to cross a solid white line?

It is legal, although “discouraged,” to cross a single solid white line. It is illegal to cross double white lines on or off the interstates. All states, including Colorado, follow the guidance for roadway markings from the Federal Highway Administration’s Manual on Uniform Traffic Control Devices (MUTCD).

What does white diamond on road mean?

In the United States and Canada, a diamond lane is a special lane on a street or highway that is reserved for specific types of traffic. These lanes are usually marked with white diamonds or lozenge, hence their name. … High-occupancy vehicle lane (HOV), also known as a carpool lane.

When can you legally cross a solid white line?

“You may cross the line if necessary, provided the road is clear, to pass a stationary vehicle, or overtake a pedal cycle, horse or road maintenance vehicle, if they are travelling at 10 mph or less.”

Can you turn left on a red in BC?

In British Columbia, you can also turn left on a red from a two-way street onto a one-way street. No provinces allow left turns onto a two-way street on a red light.

Article first time published on

Can you cross a solid white line in BC?

Drivers are permitted to cross a single, solid yellow line when it’s safe, but cannot change lanes over the solid white line – even if they are entering or exiting a High Occupancy Vehicle lane.

What do the zig zag white lines mean?

White zigzags are commonly found either side of pedestrian crossings. They are designed to indicate that parking and overtaking in these zones is strictly prohibited. The same rule applies to yellow zigzag lines, which are found outside of schools, hospitals, police and fire stations.

What do the zig zag lines mean in London?

The approach to, and exit from, a pedestrian crossing is marked with zigzag lines. It also means that you must not park on them or overtake the leading vehicle when approaching the crossing. Parking here would block the view for pedestrians and the approaching traffic.

What happens if you park on zig zag lines?

As a rule, don’t park on zig-zags. Both yellow and white zig-zag road markings indicate that parking is prohibited and doing so can carry more than just a fine – you can be given penalty points too. … White zig-zag road markings are enforced 24-hours a day, every day.

What does a broken yellow line next to a solid yellow line mean?

Lines can be solid, broken, single or double. Pavement markings – yellow lines • Yellow lines separate traffic moving in opposite directions. … Broken yellow lines alongside a solid yellow line means passing is permitted on the side with the broken line. Passing is not permitted on the side with the solid line.

What does a dashed yellow line mean?

Explanation Yellow lines separate traffic moving in opposite directions. A single dashed yellow line in the center of a road indicates that vehicles traveling in both directions are permitted to pass. Drivers may only begin a pass if they will not interfere with any oncoming traffic.

What double yellow lines mean?

​​​​Signs and Signals > ​Road markings Double yellow lines mean no waiting at any time, unless there are signs that specifically indicate seasonal restrictions. The times at which the restrictions apply for other road markings are shown on nearby plates or on entry signs to controlled parking zones.

Can you pass double lines to pass a car in front of you?

In California, you can cross a double yellow line in these situations: To pass a slower vehicle – broken line on your side. If the double yellow line closest to you is broken (dashed), you may cross them to pass another vehicle. (VC 21460(c)(1).)

Is it ever OK to cross a double yellow line?

Vehicle Code 21460 is the California statute that provides rules regarding driving on State roadways with parallel lines. Per this statute, motorists cannot drive to the left of: double parallel solid yellow or white lines, or. double parallel lines, one of which is broken, unless to pass another car.

What are yellow signs for?

Yellow: Yellow signifies WARNING. Yellow traffic signs stand for slowing down, driving with caution, or a general warning. It may be yellow, or yellow-green with black wording or symbols. This sign warns you about hazards or possible hazards on or near the roadway.

Can you make au turn over a solid line?

It is illegal to overtake or do a U-turn across a single or double continuous centre line, or a continuous centre line to the left of a broken line. You can overtake or do a U-turn across a double broken centre line or a continuous centre line with a broken line to the left of it.

Can you drive over a painted traffic island?

In New South Wales, you can drive on a painted island surrounded by single broken or unbroken lines for up to 50 metres to: enter or leave the road. enter a turning lane that begins immediately after the painted island. angle park on the opposite side of the road (without making a U-turn).

What does a red cross above a lane mean?

A flashing red cross indicates the lane is being closed to traffic. It can also mean the lane is closed to traffic up ahead. For your safety, if a red cross is flashing above the lane you are travelling in, you should exit the lane as quickly and safely as possible.

What road lines can you overtake on?

Double white lines where the line nearest to you is broken. This means you may cross the lines to overtake if it is safe, provided you can complete the manoeuvre before reaching a solid white line on your side.

Can you drive on hatched markings?

Hatched road markings are simply used to separate traffic for safety reasons. … Whether you can drive in a hatched area is dependent on if it is surrounded by a continuous solid white line or a broken one.

What does white arrow on road mean?

Explanation: This curved arrow on the road indicates the direction that traffic should pass solid double white lines that are coming up.

What does two white diamonds painted on the road mean Japan?

A white diamond painted on the road means you are approaching a pedestrian crossing. When a pedestrian crossing is highly visible to road users there tends not to be a white diamond painted on the road.

What does BIS mean on French road signs?

What does Bis mean on French road signs? Occasionally you’ll see the word ‘Bis’ in italics on directional signs before the name of the destination, for example Bis-Lyon or Bis-Toulouse. It points out alternative routes to your destination, that avoid main roads or autoroutes.

What are brown signs on the road?

A tourist sign, often referred to as a brown sign, is a traffic sign whose purpose is to direct visitors to tourist destinations, such as historic buildings, tourist regions, caravan or camp sites, picnic areas, sporting facilities or museums.

What does a flashing green light mean in BC?

A flashing green light on a traffic signal means the signal is pedestrian activated. So, when you approach a flashing green light, use caution, because the signal could be activated by a pedestrian at any time and you might have to stop and let the pedestrian to cross.

What does a flashing yellow light mean BC?

Flashing Yellow: A driver facing a flashing yellow light must enter the intersection or pass the signal not at an intersection only with caution, yielding to pedestrians in the same manner as a flashing red light requires.