When purchasing your pegboard, make note of the hole size. Some have 1/4- inch holes, while others have 1/8-inch holes. The hole size will determine the type of hooks you need. Your home center will have a wide assortment of pegboard accessories, all of which can be quite useful.

Are all peg board holes the same size?

All pegboard has holes with 1-in. spacing, but there are two thicknesses and two hole sizes available. Small hole pegboard is usually 1/8-in. … Large hole pegboard is usually 1/4-in.

How are pegboard hooks measured?

Pegboard hooks come in two sizes, 1/4 inch and 1/8 inch, which is the measurement of the diameter of the wire used to make the pegboard hook. You can use smaller 1/8 inch pegboard hooks in the larger 9/32 hole pegboard holes, but you can not use the 1/4 inch pegboard hooks in the smaller 3/16 hole pegboard.

What size is standard pegboard?

Pegboard is produced from hardboard and HDF (High Density Fiberboard). Standard patterns offered are 1″ x 1″ OC, 1/2″ x 1/2″ OC, 1″ x 2″ OC, and 1″ x 3″ OC. Hole sizes are 9/32″ diameter (nominal 1/4″) and 3/16″ diameter (nominal 1/8″).

How do you cut holes in pegboard?

Jigsaw or circular saw: Using a jigsaw or circular saw is the best way to cut pegboard. For cutting pegboards, you need to use the proper size blade for the saw. You have to select the blade with fine sharp teeth for ensuring a clean cut through the pegboard.

Why is pegboard so expensive?

Wood pegboards are the most expensive type of pegboard because they have a decorative look. … Metal pegboards are usually made of aluminum or stainless steel. Because of how heavy these panels are, they’re strong enough to hold large tools.

What thickness does pegboard come in?

Two common thicknesses for pegboard hangers are 1⁄8″-dia. and 3⁄16″-dia., both of which fit into standard pegboard hole configurations.

Are all Pegboard hooks the same?

Pegboard hooks come in many different shapes and sizes depending on what they were designed to hang. Some pegboard hooks use one pegboard hole, and others may use multiple holes.

How strong is a pegboard?

Pegboard manufacturers state the standard 3/16″ pegboard can safely hold 100 lbs of weight. The pegboard I tested showed a single peg can hold over 150 lbs without tearing or pulling away from the wall.

What is the best tool to cut pegboard?

The best tool and blade to cut Pegboard is not with a hand tool like a utility knife, but the best tool for cutting pegboard is by using a circular saw.

Article first time published on

Will Lowes cut pegboard for you?

The peg holes are larger than any pins Lowes had so you may want to look elsewhere for better sized pins and tool holders. Nice pegboard of high quality. However, the holes are quite big for most common pegboard hangers. … Lowes cut it to size at no extra charge.

Can you cut metal pegboard?

Yes….. after cutting, you’d have to drill a large hole in the front and then a smaller hole in the back but certainly doable. Failed to get answers. Question: Will it work with wall control 30-wrk-400gb standard workbench metal pegboard tool organizer?

Can you wallpaper over pegboard?

Wallpaper The Front Of the Pegboard Then glue it onto the front of the peg board. The wallpaper glue instructions may say to put the glue onto the wall/pegboard, but in this case you want to brush it onto the wallpaper. Otherwise, you will end up with a lot of glue squishing out through the peg board holes.

Can I paint pegboard?

When painting pegboard, we would recommend using a paint gun (or spray paint) over rollers. When using rollers, it will be much easier to get the pegboard holes clogged up, which makes it harder to fill your board with all your pegboard accessories once it’s painted. … Ideally, you’ll use a professional paint sprayer.

Can you Mount pegboard on drywall?

Pegboard goes up pretty easily and can be installed over drywall or even bare studs (such as in an unfinished garage). The trick to installing it is to create a 1/2-inch or larger gap between the wall and the back of the pegboard.

What material is best for pegboard?

Generally made out of compressed wood fiber and resin, then coated with thin layer of oil. Being so common, Masonite pegboard is the most readily available types of pegboard and can be found at most hardware and home improvement stores.

What can I use instead of pegboard?

Plywood. Bolt plywood to the wall where you need to hang items for easy access. Sheets of plywood can be cut to any size and bolted to the wall to form an inexpensive pegboard alternative. Tools are then hung on nails instead of hooks.

How much weight can a pegboard take?

Pegboard will hold 100 lbs when properly mounted. Each hole will hold 5 lb ststic load.

How do you make a pegboard sturdy?

If you want a sturdy pegboard, you need to look for the thickest board you can find! In our store, that meant the 4’x4′ pieces that were not primed. Instead of buying 1 sheet of 4’x8′ pegboard, we bought 2 4’x4′ pieces because they were so much thicker. This also helps for transport if you don’t have a truck!

What are the plastic things that come with Pegboard hooks?

Peg locks or pegboard hook retainers are clips, usually made out of plastic, that cover the hooks on the board while the two flanges fit into the adjacent holes on the left and right side of the hook.

What are Pegboard hooks used for?

These pegboard hooks have a U-shaped end that attaches to your pegboard, and then a two-ringed prong that sticks out from it. These are great for lining up all your screwdrivers, pliers, files, paintbrushes and any of the other hundreds of tools you have in your toolbox.

How do you keep hooks from falling off pegboard?

1. Get the perfect hooks with double peg attachment and appropriate thickness for your board.
2. Use metal wire to secure thin hooks.
3. Use glue or a zip tie to secure the thin hooks to your board.
4. Use plastic peg locks.

How do you hang heavy tools on a pegboard?

1. Step 1: Find the area where you want to put your pegboard. …
2. Step 2: Locate the studs in your wall using a stud finder and mark them with a pencil. …
3. Step 3: Mount your pegboard in place and secure it via the studs. …
4. Step 4: Finish securing your pegboard to the wall with standard drywall screws.

What's the best way to cut hardboard?

The best way to cut hardboard is by using a circular saw or hand saw. They are specially made for cutting through wood. Other tools to best cut hardboard would be the Jigsaw, Table Saw, Track Saw, and Panel Saw. You can also use a Utility knife to cut hardboard if you’re on a budget and want to go DIY.

How do you cut a thin tempered hardboard?

1. Don’t stop-and-start while cutting with a utility knife. …
2. Maintain firm pressure on the straight edge so it doesn’t shift out of place while you’re cutting.

What is that board with holes called?

Perforated hardboard is tempered hardboard which is pre-drilled with evenly spaced holes. … Peg-Board is an expired trademark used as a brand name by the Masonite Corporation, first used in 1962, which is often used as a generic term for perforated storage boards made of hardboard, wood, metal, or other material.