Sand the cabinets with a fine 200-grit sandpaper. … Paint the cabinet doors with a single coat of your base color. … Rub a beeswax candle or wax block onto the cabinet in the areas that you want to distress. … Paint the topcoat on the cabinets. … Sand the door lightly on the waxed areas.

How do you distress cabinets?

1. Sand the cabinets with a fine 200-grit sandpaper. …
2. Paint the cabinet doors with a single coat of your base color. …
3. Rub a beeswax candle or wax block onto the cabinet in the areas that you want to distress. …
4. Paint the topcoat on the cabinets. …
5. Sand the door lightly on the waxed areas.

How do I change the look of my kitchen cabinet doors?

If your cabinet doors feature raised or recessed panels surrounded by a molding-like frame, you can give the doors an entirely new look by embellishing or replacing the panels. Embellish the panels by covering them with ceramic tile, backsplash sheets that look like stamped tin or with a contrasting color of paint.

Can you use stain to antique cabinets?

Using stain or glaze to produce an antique effect is done on painted cabinets. Additional effects can be added later to produce a more complete look. Such as distressing or strategic sanding. Regular wood wiping stain is used or a glaze mixed thinly, 50% paint – 50% glaze and a little water.

What is chalk paint?

Chalk Paint® is a decorative furniture paint specifically designed by Annie Sloan to be easy to use, quick, and reliable. Chalk Paint® very rarely requires any preparation, such as sanding or priming, and can be used indoors or outside, on just about any surface.

Can I use stain as a glaze over paint?

Theoretically, almost any stain could be used as a glaze. However, most glaze formulations are thicker than stain to allow more control and manipulation of the color and tend to have more intense coloration, since very little glaze will be left on the surface.

How do you distress laminate cabinets?

1. Step 1: Sand to remove paint OR lightly sand to roughen the surface. …
2. Step 2: Wipe Down Furniture and Begin Painting. …
3. Step 3: Paint Spots with Acrylic Paint. …
4. Step 4: Spread the glue & paint over it to make the crackles. …
5. Step 5: Distress with by dry brushing. …
6. Step 6: Add the backing. …
7. Step 7: Add the flourishes.

How do you update old cabinets without replacing them?

1. Add crown molding to builder basic cabinets to make them look custom. …
2. Crown molding can also be used to extend cabinetry to the ceiling. …
3. Use removable wallpaper to spruce up a rental kitchen without sacrificing your deposit.

How do you glaze stained cabinets?

1. Step 1 – Remove doors and drawers and remove hardware. Remove the doors. …
2. Step 2 – Wash cabinets. …
3. Step 3 – Apply a light coat of lacquer, if needed. …
4. Step 5 – Apply the gel stain. …
5. Step 6 – Remove excess gel stain. …
6. Step 7 – Finish off with a coat of lacquer.

How do you spruce up cabinet doors?

1. Try Removable Wallpaper. …
2. Swap Out Boring Hardware. …
3. Install Sliding Shelves. …
4. Get Organized With Drawer Dividers. …
5. Hang Storage Bars Inside Doors. …
6. Add Interest With Furniture Legs & Feet. …
7. Try Open Shelving. …
8. Add Toe Kick Drawers.

Article first time published on

What does Valspar antiquing wax do?

Product Description. Dark wax to be used over chalky finish paint and sealing wax that provides a vintage looking finish. Last step to old-world charm. Sealing wax, low-gloss protection perfects the look.

How do you wax wood cabinets?

1. Step 1: Seal the Cabinets. Before applying coats of wax, you have to seal the cabinets first. …
2. Step 2: Applying the Wax. Use a clean microfiber cloth to apply the wax. …
3. Step 3 : Drying Time. Paste wax only takes 20 minutes to dry and liquid wax will usually take about 30 minutes. …
4. Step 4: Buffing the Wax.

How do you seal antique wax?

1. Begin with a piece that has been painted and is completely dry. Use a wax brush to apply the dark antiquing wax onto the furniture piece. …
2. Wipe off the excess wax and buff until no longer tacky. This will seal the same as soft wax, but gives off a darker finish.

Does chalk paint scratch easily?

When chalk paint isn’t properly protected and sealed it can chip and scratch pretty easily. So what’s the best way to keep chalk paint from scratching? Applying a liquid topcoat is the best way to keep chalk painted surfaces from scratching.

What colors does chalk paint come in?

As detailed above, chalk paint comes in a variety of colors, ranging from white to light green, as well as shades of red, pink, and gray. You can choose whichever color you like, provided it pairs well with the color of the furniture you are painting.

Do you have to use chalk paint to distress?

Yes you can… While chalk paint is very well suited to the distressed shabby chic look, you can also use this lovely velvety paint to create clean lines such as a modern style, a classical French look or Hamptons style. … However I am a huge fan on the velvety smoothness of waxed chalk painted furniture.

How do you make laminate look distressed?

Sand the edges and sharp areas such as ornamental details using a fine-grit sanding block to smooth them slightly, giving them a gently distressed appearance. It’s fine if the sanding goes through the paint layer, as this contributes to the distressed look.

What is cabinet refacing?

Refacing cabinets improves the look and feel of your home in less time than a full remodel. During your cabinet refacing project, your existing cabinet doors and drawer fronts will be replaced with high-quality veneer materials, while the structure of your cabinetry remains.

How do you make wood look old with vinegar?

1. Soak some steel wool in white vinegar for a few hours or a few days – the longer it steeps, the darker the aged effect will be. …
2. Use 0000 steel wool (shown here) so it breaks down even faster in the vinegar.

What is the difference between glaze and polyurethane?

You can change the tone of your cabinets — without the hassle of stripping and restaining — by glazing right over their existing polyurethane finish. A glaze is essentially a clear finish with added pigment that renders it translucent. … Oil-based polyurethane and epoxy resin glazes work best on cured polyurethane.

How do you glaze cabinets?

Apply The Glaze You can use a rag, natural bristle paint brush, or foam brush to apply it. Liberally apply a layer of glaze over one of the cabinets, using a circular or straight motion. The glaze is going to look messy and darker than your desired outcome, but don’t worry! That’s how it is supposed to look.

Is gel stain and glaze the same thing?

A gel stain may look similar to a wood glaze, but they aren’t the same thing. Like a liquid stain, a gel stain has no hardening agent. … A glaze contains pigment, but the pigment is dissolved in a varnish or shellac base so it will harden on the surface of a pre-existing finish.

Can you Antique with stain?

Applying a stain over the painted surface allows for a distressed, vintage-like finish. Through a variety of stain colors, apply one coat with a cloth and wipe excess away in even, straight motions (avoid swirling the cloth).

Can you glaze over laminate cabinets?

If your cabinets are a builder grade laminate material, you can still do this technique just stick to the oil based glaze. … You can use latex here, but make sure you are putting it over a latex surface, if you are unsure, a fresh coat of oil primer, and a new coat of latex white will prep the surface for you.

How do you refurbish old cabinets?

1. Step 1: Clean the surfaces. …
2. Step 2: Protect yourself and the rest of the kitchen. …
3. Step 3: Soak the hardware. …
4. Step 4: Strip and refinish your cabinets. …
5. Step 5: Sand, prime, and paint the wood.

How do you upcycle old kitchen cabinets?

1. Remove all the hardware. …
2. Remove the cabinet doors. …
3. Sand the inside and outside of each door. …
4. Sand the units left behind. …
5. Hand sand the hardware. …
6. Prime the hardware. …
7. Spray the hardware. …
8. Masking tape the floor & Surfaces.

Can I replace cabinet doors only?

Can You Just Replace the Cabinet Doors? You can definitely just replace cabinet doors. If you’re up for a little bit of work with some basic tools, and maybe a spare set of hands to help, you can even do it yourself.

How do you attach beadboard to cabinet doors?

1. Measure Your Cabinets and Beadboard.
2. Sand the Doors.
3. Cut the Beadboard.
4. Attach the Beadboard.
5. Apply Caulk.
6. Paint or Stain the Beadboard.
7. Attach the Cabinets.

How do you update oak cabinets?

1. Paint the Walls.
2. Change the Cabinet Hardware.
3. Replace the Backsplash.
4. Stain the Cabinets.
5. Add White Cabinets.

Can you use antiquing wax on latex paint?

Wax as a top coat, does not apply when you have used Latex paint because as you may know- Latex has a rubbery surface and the wax cannot penetrate it. Latex literally floats on the surface – which is why you always use a primer first to give the Latex paint something to “bite” to.