Press the button at the back of your scale.Press the unit button again to change the unit.Check the screen of your scale to see the unit change. The unit is confirmed a few seconds after you stop pressing the button.

How do I change my Withings body cardio scale to kg?

Press the button on the side of your scale. Press the button again to change the unit. Make sure the correct unit is displayed on the screen of your scale.

How do I reset my Withings body scale?

Turn your Body+ over and look for the button beneath your scale. Hold the button for 8 seconds and release it. Turn your scale back and look at its screen, three options are displayed: mac, upgrade and reset. Press the button again until the arrow is pointing to reset.

How do I change my Withings weight?

1. Open the Health Mate app.
2. From either the Timeline or Dashboard, tap the ‘+’ icon in the upper right hand corner.
3. Tap ‘Weight’
4. Slide to the correct weight.
5. Tap ‘OK’ in the upper right hand corner.

How do I change my Withings app to pounds?

Open the Health Mate app. Go to Profile. Tap Settings (at the top-right corner of the screen) > Units. Select the units you want.

How do I reset my user profile scale?

Remove all batteries from the back of your scale. Leave the scale without its batteries for at least 10 minutes. Make sure that the battery compartment is clean, and the contact terminals are free of debris or residue. Check that the batteries have the correct polarity and reinsert them firmly in place.

How do you change kg to lbs on Health Mate app?

Open the Health Mate app. Go to Profile. Tap Settings (at the top-right corner of the screen) > Units. Select the units you want.

How do I reset my Withings scale WIFI?

1. Open the Health Mate app.
2. Go to Devices.
3. Tap Body.
4. Tap Update Wi-Fi Configuration.
5. Press the button at the back of the scale and tap Next.
6. Tap Next. …
7. To install your scale in Wi-Fi, perform the following steps:

How does Withings scale calculate body fat?

Withings Body+ uses bioelectrical impedance analysis (BIA) to estimate body composition. The scale assesses body fat and water percentage, as well as muscle and bone mass, to help people take steps toward a healthier lifestyle. All of these measurements are taken automatically each time someone steps on the scale.

How do I reset my Withings data?

1. Open the Health Mate app.
2. Go to My devices.
3. Look for your Pulse and touch Settings.
4. Tap Dissociate this product.
5. Tap Remove from my account.
6. Perform a factory reset of your Withings Pulse.

Article first time published on

What is Withings app?

The Health Mate app is a free app that centers around three key features: Tracking your health. Keeping you motivated. Installing Withings devices.

What is athlete mode?

What is Athlete Mode? Athletic users have a body composition that needs to be calculated differently than the average person. This mode simply informs the scale to lower fat mass measurements and increase muscle mass measurement values to match the characteristic lifestyle and body composition of an athlete.

How do you change units on body+ Scale?

1. Press the button at the back of your scale.
2. Press the button again to change the unit.
3. Make sure the correct unit is displayed on the screen of your scale. If not, press the button again.
4. The unit change is confirmed a few seconds after you stop pressing the button.

How do I change my Starfrit scale from kg to lbs?

Open battery case cover on the back of scale. Pull up and down the unit switch to convert scale unit between kg-lb. Scale has an automatic conversion feature which allows you to weigh units in metric (kg) and imperial (lb).

How do you adjust digital scales?

1. Turn the digital scale over. Remove the battery compartment lid. …
2. Place the batteries back into the digital scale in the same position they formerly occupied. …
3. Place the digital scale on a flat surface. …
4. Turn the digital scale on. …
5. Place the nickel on the platform.

How do I pair my Itek scale?

You have to be in the app with bluetooth on and the device on. The app will ask you to pair with your device, then they will communicate. So far I’ve only use the app as guest and so far have only been able to get weight on scale. No other measurements.

How do I sync my Withings?

1. Make sure you enable Bluetooth on your mobile device.
2. Make sure the Health Mate app is open.
3. Press and hold the button at the top of your Withings Pulse for three seconds to start the manual sync. Your Withings Pulse has to be close enough to your device.

How do I connect my Withings scale to my phone?

1. Once the scale is found, press ‘Next’.
2. Tap ‘I don’t have a WiFi Network’ if you just want to connect the scale via Bluetooth. In that case, continue to Step 14.
3. Tap ‘Set up another network’.
4. Enter the password of your WiFi network and press ‘Next’.
5. Press ‘Done’. …
6. Press ‘Invite’ if you want to add other users.

How long does it take to set up Withings scale?

Troubleshooting steps for your Withings Body scale It may take up to five minutes for new weight values to transfer from your scale to the One Drop app. Check your internet connection. Your phone requires an internet connection to import any new weight values from your scale.

Why is my scale off?

A scale can be affected by the surface it sits on. The best surface for a scale is a hard surface such as a flat bathroom or kitchen floor. It may be cushioned too much by carpet or other soft surfaces, which can make the scale off balance and give you inaccurate readings.

How can a scale Tell your water weight?

New fancypants smart scales can measure your body water percentage (BWP) by sending a harmless electric current through the body (a process called bioelectric impedance analysis).

Is 46 muscle mass good?

According to Withings, normal ranges for muscle mass are: Ages 20-39: 75-89 percent for men, 63-75.5 percent for women. Ages 40-59: 73-86 percent for men, 62-73.5 percent for women. ages 60-79: 70-84 percent for men, 60-72.5 percent for women.

Is Withings scale waterproof?

Your Withings Move can withstand a pressure similar to that of a 50 m (165 ft) depth. You can, therefore, use it when dishwashing, splashing or swimming. However, it can’t be used for diving or snorkeling.

Why is my Withings scale not connecting to WiFi?

If your scale can’t connect to Wi-Fi, perform the following steps: If you get a DHCP error, reboot your router and start installing your scale again. If the problem persists, click here. If you get a DNS error, reboot your router and start installing your scale again.

How do I connect my Withings to my WiFi?

1. Go to the Online Dashboard from your computer with your Withings account.
2. Select the Menu icon in the upper right-hand corner.
3. Select My Devices.
4. Select Other devices.
5. Select Configure a Wifi Body-Scale WBS01.

How do I update Withings BPM?

1. Open the Health Mate app.
2. Log in to your account, if you already have one, or create one.
3. Tap Devices.
4. Tap +.
5. Tap Blood Pressure Monitors.
6. Tap BPM.
7. Tap Install.
8. Press the button of the BPM. The LED of the BPM lights up blue and starts blinking.

How do I reset my Withings watch?

While the watch shows Factory Reset, press and hold the watch button for one second and you will see Reset in 5 clicks. Press the button 5 times and the watch will be reset to factory settings. While this occurs, the word Reset will appear on the watch’s display.

How do you pair withings steel?

1. Open the Health Mate app.
2. Tap Sign up.
3. Tap Watches.
4. Tap Steel.
5. Tap Install.
6. Push the reset button located at the back of your Steel using the tool it came with. …
7. Put your Steel close enough to your iOS or Android device.

Why is my Withings watch not working?

Charge the watch for 12 hours. While the watch is on the charger, press and hold the button for 20 seconds to reboot it. Be sure not to remove the watch from the charger while doing this. Once again, wait 30 seconds and check if the screen lights up.

How do I update my Withings app?

1. Go to My devices.
2. Tap Withings Go.
3. Tap Check for Updates.
4. If an update is available, you will be prompted to install the newest firmware version.
5. Tap Upgrade.
6. Tap Close when the upgrade is complete.

Can you use Withings scale without app?

Yes, the Withings Body scale can still be used even without syncing it to Health Mate and without linking it to WiFi. It will still function as a normal weighing scale.