Shut off the ventless gas heater’s power and allow it to cool for 30 minutes or more.Open the heater’s access panel. … Vacuum out the inside of the panel to remove dust and dirt.

How do you clean a propane ventless heater?

1. Shut off the ventless gas heater’s power and allow it to cool for 30 minutes or more.
2. Open the heater’s access panel. …
3. Vacuum out the inside of the panel to remove dust and dirt.

How do you clean dust out of a gas heater?

1. The first thing you will need to do is remove the front panel of the heater by removing the screws that hold it in place. …
2. Get a vacuum with a hose and preferably a brush on the end of the hose.
3. Using the vacuum remove the surface dust from the burner and the rest of the heater.

Why does my ventless gas heater smell?

If the gas doesn’t burn completely then some of the carbon molecules remain as carbon, or soot. … When mercaptan is burned it creates sulfur dioxide which irritates the eyes and respiratory tract. Combine that with other impurities in your natural gas supply and what you get is a distinctive ventless gas smell.

Can a ventless heater make you sick?

All unvented gas heaters, even when burning properly, produce large concentrations of carbon dioxide, raising the levels of in the house. What is the hazard of nitrogen dioxide? NO2 is a toxic gas that at lower concentrations is an upper respiratory irritant causing cough, sore throat, headache, vertigo, and nausea.

Why does my ventless propane heater keep going out?

If the thermocouple is too far from the flame, this can cause the pilot to go out and shut down the propane heater; you can fix this easily by moving the thermocouple closer to the flame. The thermocouple could also be worn out, in which case it needs to be replaced.

Why does my ventless heater keep going out?

The heater won’t operate properly if the pilot flickers, is too weak or goes out, and the cause could also be blockages in the pilot tube. Another cause of a weak pilot is a faulty thermocouple. It’s a heat sensor placed next to the pilot flame that signals the gas valve to stay open when the flame is burning.

Does natural gas leave a residue?

A “spill” of natural gas? Natural gas is not gasoline, it is a gas which is not toxic and is lighter than air. If there ever is a leak, the gas will simply rise and dissipate in the atmosphere leaving absolutely zero residue. … If there’s a leak, that leak could ignite.

Why does my ventless propane heater smell like kerosene?

A vent-free appliance requires room air to operate and when the appliance draws room air in with any chemical base odor it will go through the burner and come out smelling like a petroleum based product. Most chemicals that are airborne in the room that go through the burner comes out smelling like kerosene.

Why does my heater smell like plastic?

Plastic – If your heater smells like burning plastic, the odor will quickly become intolerable. This smell likely means that a foreign object, such as a toy or a humidifier nozzle, has become lodged in the furnace and has been slowly baking away.

Article first time published on

How do you clean a gas heater pilot?

1. Cut off the gas to your furnace. …
2. Remove the pilot light and thermocouple assembly. …
3. Use your pliers or wrench to remove the pilot light and thermocouple from the bracket.
4. Using the wire brush, brush away the carbon buildup and soot from both components.

What's a thermocouple look like?

The thermocouple looks like a piece of metal tubing smaller than a soda straw. To find it, first locate the gas control box. This is the box that the main gas line enters, where you turn the gas on in the furnace. (On most furnaces, it also houses the button that you hold open or push to relight the pilot.)

Are ventless gas wall heaters safe?

There are safety concerns, and building scientists point out that ventless heaters can damage homes if they’re not sized or used correctly. … Ventless heaters exhaust 100 percent of their combustion products into the house. This means chemicals like carbon monoxide, nitrogen dioxide and water vapor enter the house air.

Is ventless heater safe?

The truth is, vent free heaters are, in and of themselves, extremely safe, economical to operate and, when properly sized and maintained, are proven to meet today’s rigorous standards for air quality. And as long as consumers demand energy-saving products, the future of vent-free appliances looks very bright indeed.

Why are ventless heaters safe?

Vent-free gas heating appliances have compiled an outstanding safety record in millions of American homes. That’s because, since 1980, vent-free gas products have been equipped with a unique safety pilot system called an Oxygen Detection Safety-Pilot, or ODS. The ODS continuously monitors the oxygen level in the room.

Are Dyna Glo ventless heaters safe?

Dyna-Glo wall heaters are the ideal choice for safe, indoor supplemental heating. This state-of-the-art vent free technology does not require a flue or chimney. … This Blue Flame Wall Heater burns with 99.9% efficiency, and operates on Natural Gas only.

How do you clean a thermocouple?

The best way to clean your thermocouple is to use either a piece of steel wool or the coarse side of a sponge to gently clean off any soot or other remnants. You can use a pencil eraser to clean between the threads of the screw that connects the thermocouple to the control valve of your system.

Will pilot stay lit if thermocouple is bad?

The job of the thermocouple is to keep the pilot lit. It does this by sending a tiny electric current to a sensor on the gas valve signaling the valve to stay open. … Nothing lasts forever, and when the thermocouple wears out, the pilot won’t stay lit and your appliance won’t work.

Why won't my pilot light stay lit on my gas heater?

If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.

How do you clean a thermocouple on a propane heater?

Cleaning a patio heater thermocouple requires shutting off the fuel supply, removing the thermocouple from the pilot assembly and using a dry sponge or steel wool to clean accumulated debris and soot.

Why does the pilot light go out on my wall heater?

If your furnace pilot light keeps going out, it’s likely you have a broken thermocouple in your gas furnace. The thermocouple is a rod that comes into physical contact with the flame in your system. … When this component is not able to detect the flame, it will close the gas valve to prevent a gas leak in your home.

How do I stop my ventless gas logs from smelling?

The best way to prevent smells in a gas fireplace is to improve the quality of air in your home. If you smoke, take it outside. If you have pets, vacuum regularly and consider investing in a room air purifier. Avoid the use of harsh cleaning chemicals and plug-in deodorizers.

How do you clean ventless gas logs?

1. Turn off the gas and electric leading to the fireplace. …
2. Carefully remove the logs, stones and burner, and place them on a newspaper. …
3. Attach a hose to the vaccum, and clean the inside of the firebox. …
4. If doors are attached to your fireplace, clean them inside and out with a non-ammonia cleaner.

How do I get rid of gas smell in my heater?

When you turn on the furnace for the first time, you might notice a slight gas smell while the furnace burns off the accumulated debris. This is normal, but you can cut down on the duration of this unpleasant smell by opening some windows to allow for cross ventilation to dissipate the smell quickly.

Can your gas line get clogged?

A gas line can become blocked with dirt or other debris; insects; tree roots; or even water. Alternatively, a gas line can develop a bad dent or kink in the line that blocks the flow of gas through it. The most obvious sign of a natural gas blockage is gas-powered appliances that no longer work properly or at all.

How do you fix a clogged gas line?

1. Check the basics first. Before you go through the trouble of disconnecting the tank and the gas lines, check to make sure that the propane tank is full and that the valve on the tank is open. …
2. Disconnect the propane tank. …
3. Clean the gas lines. …
4. Reassemble the grill setup.

What is the white powder on my furnace?

The first, kinda liquidy, gooey product of this corrosion is zinc hydroxide, which slides down the inside of the vent onto the heating appliance (furnace, boiler, or water heater) where the rest of the moisture evaporates, leaving a white, powdery residue that is zinc oxide.

Why does my portable heater smell weird?

Accumulated dust burning is the very common odor you smell when turning your heater on for the first time in a long time. … So once the heat comes on, the dust burns off and the odor passes through your air vents. The smell of burning dust should go away after a while, so there’s no cause for alarm.

Why does my heater smell like burnt?

A burning smell when you first turn your heater on is most likely caused by dust buildup on your furnace. … When you turn it on for the first time after not using it for a while, this dust begins to burn off, oftentimes causing a burning plastic smell in the house.

Why does my electric heater smell like rotten eggs?

Furnace smells like rotten eggs or like a sewer The smell can indicate a failed heat exchanger, especially if you have a high-efficiency furnace. This is a serious problem because a bad heat exchanger can pump unsafe levels of dangerous carbon monoxide (CO) gas into your home.

Can a pilot light get clogged?

The pilot light may be going out if the pilot tube (burner) is blocked, dirty, or clogged. A dirty pilot tube will not be as reliable than if it is clean. … Any blockage in the pilot tube will cause the furnace to not stay lit. So cleaning it is an easy solution without having to replace any parts.