To remove and reset the device Once the controller is ready to remove your device, press and release the button on the smart outlet to remove it from the network. To return to factory defaults Press the button 3 times, then press and hold the button for at least 3 seconds. The LED will blink 5 times to confirm.

How do I reset my smart socket?

Make sure the Smart Plug is plugged into a working power outlet, and press the button on the side of the Smart Plug. Hold the button until the LED light on the Smart Plug turns red. Wait for the LED to start blinking blue. When the LED blinks blue, the plug has been reset.

How do I reconnect my smart plug?

Smart Plug (Outlets/Plugs): Press Wi-Fi power button once to turn plug on (Red LED). Press again to turn off. Press and hold for about 10 seconds and release once Blue LED is quickly flashing. If the Red LED comes back on steady, press and release the button and the Blue LED should start flashing quickly.

How do I pair my GE smart outlet?

1. Launch the C by GE app on your phone or tablet.
2. Tap Add in the top right corner.
3. Then tap Add New Devices.
4. Select Plugs.
5. Select the Smart Plug from the list.
6. Select your WiFi Network from the list and tap Continue.
7. Enter your WiFi Password if required to continue.

How do I reset my Smart switch?

To reset the smart switch/plug to factory defaults: Press and hold the reset button until the Wi-Fi LED blinks amber rapidly (about 10 seconds) to reset the Smart switch to factory defaults.

How do I get my GE to C in pairing mode?

1. Plug in your device in the same room as your speaker or display.
2. Set up your speaker or display if you haven’t already.
3. Open the Google Home app .
4. At the top left, tap Add Set up device. New device .
5. Follow the in-app instructions to complete setup.

How do you program a GE Smart switch?

1. Launch the C by GE app on your phone or tablet.
2. Tap Add in the top right corner.
3. Then tap Add New Devices.
4. Select C-Start Switches.
5. Tap Get Started.
6. Tap Continue when you see that light.
7. Select the smart switch from the list. Select Continue to proceed.
8. Select your WiFi network from the list and tap Continue.

How does a GE smart plug work?

The C by GE On/Off Smart Plug makes any lamp or device that plugs into a wall smart. The built-in Wi-Fi bridge adds out-of-home control for your lighting and devices and voice control when paired with a voice assistant. The plug also enables scheduling and scene setting to traditional bulbs and devices.

How do I reset my Zwave plug?

In order to complete the process, plug the smart plug into a grounded receptacle, then PRESS AND HOLD the Z-Wave button for AT LEAST 20 SECONDS. The LED indicator will stay solid yellow for 2 seconds to indicate successful reset.

How do I reset my GE Z-wave outlet?

To remove and reset the device Once the controller is ready to remove your device, press and release the button on the smart outlet to remove it from the network. To return to factory defaults Press the button 3 times, then press and hold the button for at least 3 seconds. The LED will blink 5 times to confirm.

Article first time published on

How do I fix unresponsive smart plug?

1. Unplug your Amazon Smart Plug from the outlet, and then plug it back in.
2. Reset your Amazon Smart Plug: press and hold the button on the side of the device for 12 seconds.

How do I connect my smart socket to WiFi?

WiFi Smart Plug Instruction Manual Press ADD DEVICE and select SOCKET to set up a new device. Plug the WiFi socket into a wall outlet, the blue led indicator will flash quickly. If the light does not flash quickly, press and hold the button for 6 seconds the light will then flash quickly. Connection cycle will Appear.

How do I reset my Alexa smart plug?

1. Press and hold the button on the device for 12 seconds.
2. Release the button once you see the red LED light. A blue LED blinks when reset is complete.
3. Register your Amazon Smart Plug in the Alexa app.

Why is my smart plug blinking blue and orange?

Flashing amber and blue: App onboarding process (SoftAP) initiated. Flashing blue rapidly: Connecting to the network. Solid blue: Connected to the network. Flashing amber rapidly: Factory reset.

How do I reset my GE smart bulb?

1. Launch the C by GE app on your phone or tablet.
2. Tap Settings at the bottom.
3. Tap Support.
4. Tap Factory Reset.
5. Then tap C by GE Lights.
6. The C by GE app will show you the number of times you have to turn on and off the smart bulb and the amount of seconds you have to keep the smart bulb turned on or off.

How do I reset my GE outdoor Smart switch?

To remove and reset the device Once the controller is ready to remove your device, press and release the top button on the smart switch to remove it from the network. To return to factory defaults If plugged in, unplug from the receptacle.

Why wont my GE light c connect?

1 Restart Your C by GE Smart Light Wait 10 seconds. Turn the power back on, or plug the lamp back in. Wait one minute for the smart light to reconnect to the network. Once restarted, use the C by GE app to attempt to update the light again.

Why is my smart switch offline?

Smart Life devices go offline due to overloads in your router when your router renews the LAN/WAN IP address, or if there are errors stored in its cache. Solutions to this problem include clearing the cache or using a dedicated 2.4g WiFi router for Smart Life devices.

How do I connect my GE smart switch to Alexa?

1. Launch the Alexa app on your phone or tablet.
2. Open the Menu from the top left corner.
3. Then select Skills & Games.
4. Type in “cbyge” towards the Search box in the top right.
5. Tap the found C by GE Alexa skill.
6. After that tap Enable.

Does C by GE work with HomeKit?

Currently, only Bluetooth Cync/C by GE light bulbs and light strips are compatible with C-Reach and HomeKit. If you have other Cync/C by GE devices paired to your Cync App, you will need to create another app Home with the C-Reach and Bluetooth lights you want to control with HomeKit.

Is C by GE compatible with Alexa?

Alexa will discover your C by GE devices, and now you can start controlling them! You can use the Alexa app to add them to rooms, create routines, and more.

How do I control my Z-Wave plug?

Control Plug-In Appliances With Z-Wave To add a device into your Z-Wave network, simply plug a desired light or appliance into the module. Once connected, the lamp can be dimmed and turned on/off with a Z-Wave controller up to 100 feet away.

How do I install GE smart plug to HomeKit?

Open Home, tap the plus sign (+) in the top right corner, and tap “Add Accessory.” C-Reach doesn’t have a QR code or a HomeKit label so you’ll need to tap “Don’t have a code or can’t scan?” Assuming it works, you should see your C-Reach available as an accessory.