Press and hold your switch’s button, toggle, or paddle for 10 seconds. If the reset is successful, the indicator light will begin blinking blue meaning the switch is ready to be set up again.

How do I reset my GE smart outlet?

To remove and reset the device Once the controller is ready to remove your device, press and release the button on the smart outlet to remove it from the network. To return to factory defaults Press the button 3 times, then press and hold the button for at least 3 seconds. The LED will blink 5 times to confirm.

How do I reset my Smart Life switch?

Hold the reset button (or switch the bulb off and on for 3 times) until the indication LED (or lighting device) flashes SLOWLY (as shown in example) If the light is flashing quickly, reset again by holding the reset button for about 5 seconds or switching the light off and on 3 times.

How do I connect my GE smart switch?

1. Launch the C by GE app on your phone or tablet.
2. Tap Add in the top right corner.
3. Then tap Add New Devices.
4. Select C-Start Switches.
5. Tap Get Started.
6. Tap Continue when you see that light.
7. Select the smart switch from the list. Select Continue to proceed.
8. Select your WiFi network from the list and tap Continue.

How do I reset my Z-wave device?

In order to factory reset your Z-Wave network, go to Settings > Devices > Choose your Base > Open Advanced Options > Choose Z-Wave Utilities and then select Z-wave Reset Controller. After a few seconds, the Base will beep to indicate that your Z-Wave network has been reset.

How do I pair my GE smart outlet?

1. Launch the C by GE app on your phone or tablet.
2. Tap Add in the top right corner.
3. Then tap Add New Devices.
4. Select Plugs.
5. Select the Smart Plug from the list.
6. Select your WiFi Network from the list and tap Continue.
7. Enter your WiFi Password if required to continue.

How do I reset my Jasco Z-wave light switch?

(Ask hub manufacture for more information on this.) For all our Z-wave plus in-wall switches you will click the upper switch 3 times rapidly, and the lower switch 3 times rapidly. On our paddle switches the blue LED will flash 5 times to confirm the reset (there is no LED on the toggle switches to confirm the reset).

How do I connect my GE smart switch to Alexa?

1. Launch the Alexa app on your phone or tablet.
2. Open the Menu from the top left corner.
3. Then select Skills & Games.
4. Type in “cbyge” towards the Search box in the top right.
5. Tap the found C by GE Alexa skill.
6. After that tap Enable.

Why is my Smart switch red?

LED indicator light or light ring will flash red if the circuit is overloaded.

Why is my smart switch offline?

Smart Life devices go offline due to overloads in your router when your router renews the LAN/WAN IP address, or if there are errors stored in its cache. Solutions to this problem include clearing the cache or using a dedicated 2.4g WiFi router for Smart Life devices.

Article first time published on

How do I reset my Alexa smart switch?

Press and hold the button on the device for 12 seconds. Release the button once you see the red LED light. A blue LED blinks when reset is complete. Register your Amazon Smart Plug in the Alexa app.

How do I pair my Z-wave device?

1. Click on “add device”
2. Click on Other Devices. This will open the paring screen and the gateway will search for the new device.
3. Follow the steps below to complete the pairing of the device with the gateway. …
4. Click on Add Device.
5. Click on Other Devices. …
6. Power up the Z-Wave device.

What is Z-wave exclusion mode?

Remove Devices Removing Devices is known as the Exclusion Process. It will not only remove a device from your Z-Wave hub but also factory reset the device. It doesn’t matter if the device has never been paired with your hub, exclusion mode will always give you a response no matter how many times you remove a device.

How do I reset my Z-wave SmartThings?

1. Open SmartThings app.
2. Tap Menu located at the top left corner of your screen.
3. Tap Devices.
4. Find your hub and select it.
5. From the upper right 3 dot menu, tap Z-Wave Utilities.
6. Tap Z-Wave Exclusion.
7. Ensure that the LED on Smart Home Hub is blinking.
8. Tap the button on the Z-Wave device that you want to factory reset.

How do I get my GE to C in pairing mode?

1. Plug in your device in the same room as your speaker or display.
2. Set up your speaker or display if you haven’t already.
3. Open the Google Home app .
4. At the top left, tap Add Set up device. New device .
5. Follow the in-app instructions to complete setup.

How does a GE smart plug work?

The C by GE On/Off Smart Plug makes any lamp or device that plugs into a wall smart. The built-in Wi-Fi bridge adds out-of-home control for your lighting and devices and voice control when paired with a voice assistant. The plug also enables scheduling and scene setting to traditional bulbs and devices.

Does GE Smart Switch work with Alexa?

Unlike the Caséta products, though, GE’s new switches and dimmers do not require a hub and can connect directly to a Wi-Fi network. They can work directly with Amazon’s Alexa or the Google Assistant voice assistants.

Why won't my C by GE lights connect to Alexa?

If your Cync or C by GE devices are not displaying in the Alexa app, disable the skill, then enable it again. Give a voice prompt to Alexa by saying, “Alexa, discover my devices.” Power cycle your Cync/C by GE devices by powering off for 10 seconds, then powering back on.

What to do when Alexa says device is unresponsive?

1. Check your home network.
2. Confirm the device has power.
3. Check the manufacturer’s app.
4. Check the Alexa Skill.
5. Toggle the Alexa Skill.
6. Uninstall and reinstall the device manufacturer’s app.
7. Power cycle the device.
8. Update the firmware of your device.

How do I get my smart life switch back online?

Use the App to Reconnect to Wi-Fi After the switch is in discovery mode, open the companion app on your mobile device. Using the app will allow you to select your model and start the pairing process. The app should ask to connect to your Wi-Fi. Enter your credentials, and the switch should reconnect.

Why is my Alexa Smart Plug blinking red and blue?

Make sure the Smart Plug is plugged into a working power outlet, and press the button on the side of the Smart Plug. Hold the button until the LED light on the Smart Plug turns red. … When the LED blinks blue, the plug has been reset. To continue using the plug, you will need to set it up again.

Why is my Smart Plug blinking blue and orange?

Flashing amber and blue: App onboarding process (SoftAP) initiated. Flashing blue rapidly: Connecting to the network. Solid blue: Connected to the network. Flashing amber rapidly: Factory reset.

Why will Alexa not turn on my lights?

Make sure that your smart home device is compatible with Alexa. … Make sure your Alexa device and the Alexa app have the latest software version. If your smart home devices are connected through a skill, disable and then re-enable the skill. If your device is too close to your router, it may not work.

Why can't my switch find my WiFi?

Possible Solutions: Restart the Nintendo Switch console. To restart the console, hold the POWER Button for three seconds, then select “Power Options”, followed by “Restart”. Ensure your router’s wireless security key setting is compatible with Nintendo Switch.

How do you do a hard reset on a switch?

Press and hold the POWER Button down until the system resets; this may take some time. Once the system is powered down, press the POWER Button once to turn it back on.

What is a Zwave switch?

Z-wave switches are one you can control your home lighting from your smart phone, Alexa, or Z-wave controller interface. The configuration options for your lighting are endless.

How do I reset my Honeywell Z-wave switch?

Reset to factory default Quickly press ON (Top) button three (3) times then immediatelypress the OFF (Bottom) button three (3) times. The LED will flashON/OFF 5 times when completed successfully.