Remove the battery cover using the Allen key.Remove the battery pack.Press and hold the program button while reinserting the battery pack.Hold the program button for 30 seconds until the status LED flashes red.Press the program button again.

How do I reset my Weiser Electronic Deadbolt?

A factory reset will delete all codes associated with the lock. 3 Press the Program button once more. In 20 seconds, when the LED flashes green and you hear one beep, the lock has been reset. 4 Perform the door handing process again to teach the lock the orientation of the door and add user codes to your lock.

How do I reset my Weiser Powerbolt 1?

1. Make sure the door is open and unlocked.
2. Press PROG -(for 30 seconds). You will hear 1 long beep.
3. Release PROG button.
4. Press PROG again.
5. You will hear 3 long beeps.

Why is my Weiser Lock not working?

Press and hold the program button while reinserting the battery pack. Hold the program button for 30 seconds until the status LED flashes red. Press the program button again. The lock has been reset when the LED flashes green.

How do I remove the code from my Weiser Smart Lock?

1. Press the program button.
2. Press the lock button.
3. Enter user code to delete.
4. Press lock button.
5. Re-enter user code to delete.
6. Press lock button.
7. If successful, the keypad will flash green once and you will hear 1 beep (if switch #3 is on).

Why won't my key unlock my deadbolt?

Spray the Lock with Lubricant to Remove Dirt and Dust If that is the problem, it is easy to fix. You can spray a little dry lubricant in the lock to free up the plug so you can open the door. Spray lubricant in the keyway and insert the key a few times so the lubricant can get worked into the mechanism.

How do I reset my Weiser Powerbolt 2?

1. Make sure the door is open and unlocked. …
2. Enter the default Mastercode (O-O-O-0).
3. Press the lock button. …
4. Press 0.
5. Press the lock button. …
6. Test the lock: With the door open and unlocked, Press the lock button.

How do you reprogram a Weiser Powerbolt?

1. Make sure the lock is unlocked and the door is open.
2. Enter your existing Mastercode.
3. Press. You will hear one beep.
4. Press 1 – 9.
5. Press. You will hear one beep.
6. Enter a new User Code. It must be 4-10 digits.
7. Press. You will hear two beeps if successful.

How do I unlock my Weiser privacy lock?

Both knobs/levers are locked or unlocked by turn piece inside. The outside knob/lever can be unlocked by an emergency key. The Antique Nickel finish offers a warm feel to the product’s style. For use on interior doors where a privacy locking function is required, such as a bedroom or bathroom.

How do you unlock a deadbolt lock?

Start by inserting the closed “looped” side of one bobby pin into the bottom portion of the lock. Use the second bobby pin, broken in half, toward the top of the lock and move it back and forth. This motion should set the pins and cause the deadbolt to unlock.

Article first time published on

Why is my deadbolt not working?

See if the screws in the door hinges are completely tight. … Frequently, you will discover the hinge screws are not tight by just a half turn. Just tightening the screws may solve the problem. While you are checking the hinge screws, tighten all of the screws that connect the door locks and deadbolts to the door.

How do you unlock a twist knob lock?

Insert the paper clip into the hole. Move the paper clip around until it catches something or a click is heard. There is a small button inside the knob that serves as the locking mechanism. Without too much time or effort the paper clip should contact the button and release the lock.

How do I reset my Quickset lock code?

Hold the button continuously for 30 seconds until you hear a beeping sound and see the status LED flashing red. Press the program button once again until you see the status LED flashing green and hear two beeping sounds. The Kwikset SmartCode deadbolt has now been reset and ready to be set up again.

How do I reset a Quickset lock?

1. Open your door.
2. Extend the latch bolt.
3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
4. Push and hold the reset button for 10 seconds, until the lock beeps.
5. The light ring will flash red, then spin amber.
6. The lock has now been restored and is ready to be set up again.

How long do batteries last in Weiser Lock?

The batteries will last 1 year. Note: this is based on the motorized deadbolt being cycled ten times a day. Typical battery life is 12-16 months based on use.

Why is my Weiser Lock beeping?

The lock should beep twice when it unlocks and once when it locks. It will also beep if there is a warning such as a low battery or a jammed bolt. To turn the beeping sound off: … Reinstall the battery cover.