Enter your Username and Password of your Ubiquiti account to connect the account to the NVR. On the Cameras page, you have the option to view all cameras (default), a selected group of cameras, or a single camera, depending on your search criteria.

How do I access my ubiquiti camera?

Enter your Username and Password of your Ubiquiti account to connect the account to the NVR. On the Cameras page, you have the option to view all cameras (default), a selected group of cameras, or a single camera, depending on your search criteria.

How do I login to my Ubiquiti controller?

Windows users: Start > All Programs > Ubiquiti UniFi. 2. The UniFi login screen will appear. Enter the admin name and password in the appropriate fields and click Login.

How do I reset my ubiquiti camera?

While the camera is powered on, press and hold the reset button for 10 seconds. Release the button (the LEDs will stop glowing). Do not disconnect the camera from its power source during the reboot process. The camera will restore factory settings after a few minutes.

Can you view Ubiquiti cameras remotely?

Remote VPN access You can also access your UniFi Video installation by configuring a VPN that directly connects to their setup from the Internet. This requires configuring the VPN through your gateway, as well as setting up the VPN client on the device from which you would like to access the UniFi Video application.

How do I add a camera to UniFi Protect?

Open the UniFi Protect app and tap Add when the device pop-up appears. If this prompt doesn’t appear, tap on the ellipse icon in the upper-right corner of the Cameras page and select Add Elements. Note: If no devices are discovered, a help wizard will launch and walk you through troubleshooting steps for the device.

Can I run UniFi Protect on my own hardware?

Unifi Protect is the video security system from Ubiquiti. Just like the Unifi Access Point and Network components, are the Unifi Camera and Protect system really easy to use. They integrate seaslessly together, but to be clear, you can use the Unifi Protect also on its own.

How do you reset the doorbell on a G4?

1. (if the G4 Doorbell is mounted) Press the button on the bottom of the G4 Doorbell to unmount it.
2. Press and hold the small rubber button at the top of the back of the G4 Doorbell for 5 seconds, then release the button.

How do I reset my UniFi Flex 3 camera?

Reset Button The Reset Button is used to reset the camera to factory defaults. Press and hold the Reset Button for more than 10 seconds while the camera is powered on. Use the Base Mount by itself to install the G3 Flex camera on a desktop or tabletop.

How do I reset my UniFi micro camera?

Reset To reset network settings to factory defaults, press and hold the Reset button until the camera beeps two fast tones. The Power Adapter has an extendable power cable that is concealed inside the adapter casing.

Article first time published on

How do I access ubiquiti locally?

1. Turn the Enable Local Login with UI Account toggle to the OFF position.
2. Select Apply Changes.
3. Navigate to Settings > Admins.
4. Edit the admin account and revert the username and password.

What is the default username and password for Ubiquiti UniFi?

Note: The default username is ubnt and the default password is ubnt.

What is the default IP for Ubiquiti?

To begin, log into the Ubiquiti unit. The default IP address is 192.168. 1.20. The default username is ubnt, and password is ubnt.

How do I access my NVR remotely?

1. Understand Your Network.
2. Setup DDNS.
3. Setup A Port Forward.
4. Assign The DDNS Hostname To Your NVR.
5. Set Two IP Addresses For Your NVR.
6. Verify That Local Viewing and Remote Viewing Work.

Is UniFi protect software free?

No Subscription Fees: With UniFi Protect, there are no subscription fees to worry about whatsoever.

Where does UniFi video save recordings?

The Default location of recordings are: Windows Default: C:\ProgramData\unifi-video\videos. Linux Default: /var/lib/unifi-video/videos. airVision-C/UVC-NVR Default: /srv/unifi-video/videos.

What ports need to be open for UniFi protect?

PortType (TCP/UDP)Purpose7080TCPHTTP Web UI & API7443TCPHTTPS Web UI & API7445TCPVideo over HTTP***7446TCPVideo over HTTPS***

What is camera token?

The token is for when the camera cannot be detected and subsequently adopted, such as on a layer3 network.

How do I reset my g4 camera?

Reset Button The Reset button serves two functions: • Reboot Press and release the Reset button quickly. Restore to Factory Defaults Press and hold the Reset button for 10-20 seconds while the camera is powered on. Release when LED turns off.

How do I reset my UniFi Flex?

Resets to factory defaults. The device should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the LED starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the device will automatically reboot.

How do I Unmanage my UniFi camera?

1. Press and hold the reset button for 10 seconds.
2. Release the button (the LEDs will stop glowing).
3. Do not disconnect the camera from its power source during the reboot process.
4. The camera will restore factory settings after a few minutes.

What is chime box?

Chime doorbell boxes use a special type of electromagnet called a solenoid. In a solenoid, the magnetic metal surrounded by the coiled wire is in the form of a piston. … When it is at rest, the doorbell is not being pushed, and no electricity is traveling through the coiled wire.

How do you wire a doorbell?

1. Step 1: Turn Off the Power. …
2. Step 2: Choose a Good Location. …
3. Step 3: Remove the Baseboard and Trim, then Drill a Connecting Duct. …
4. Step 4: Wire the Doorbell and Transformer. …
5. Step 5: Connect Doorbell Wire to the Button. …
6. Step 6: Test the Doorbell.

Where are doorbell transformers usually located?

Doorbell transformers are most commonly located near your electrical panel or directly on your electrical panel.

How do I reset my NVR Ubiquiti?

Reset Button Resets the UniFi NVR to factory defaults. The UniFi NVR must be fully booted and running. Press and hold the Reset button for about 10 seconds. The UniFi NVR will automatically reboot with default settings.

How do I connect my micro UniFi G3?

1. When you first plug in a UVC-G3-Micro, it will broadcast its own open WiFi network that you can connect to. …
2. Open Google Chrome and browse to
3. Login with the default credentials of UBNT (ubnt/ubnt or root/ubnt).
4. Proceed through the Wizard.

How do I change my cloud password?

1. Replace memory card in Cloud Key while powered off.
2. Connect Cloud Key to switch with POE, and let it boot. …
3. Connected USB power as backup to POE.
4. Reset Cloud Key and wait for restart.
5. Log in to Cloud Key using default username/password following.
6. Restore from most recent backup.

How do you connect to Ubiquiti?

1. Take the power cable and network cable for the access point.
2. Plug 1 end of the network cable into the access point.
3. Plug the other end into the (modem) router.
4. Plug power cable into a free socket.
5. Plug the other end of the power cable into the access point.

How do I link my UniFi account?

1. STEP 1 : Update your myunifi app and open the app. Tap on Link Account.
2. STEP 2 : Fill up the details with new 10 digits unifi Mobile account number. …
3. STEP 3: Double check the account number that you have inserted earlier. …
4. STEP 4: That is all.

How do I connect my desktop to UniFi?

Step 1Connect your computer to the LAN 2,3,or4 port of the TP-Link router. Connect the Unifi modem to the WAN port of the TP-Link router. Step 2 Open the web browser and in the address bar type in domain name or IP Address of the router. And then press Enter.

What is my UniFi password?

Right click on the wireless network adaptor and select Status. Click the Wireless Properties button. In the Properties dialog that appears, move to the Security tab. Click the Show characters check box, and the network password will be revealed.