Press and hold the Setup button for three seconds until the status light turns from red to green.Enter 9-8-1 on the remote. If the status light blinks green twice, the pairing for the remote has been reset.

How do I pair my Xfinity xr5 remote?

1. Put STB or adapter to enter pairing mode (refer to RF PAIRING instructions supplied with STB or adapter).
2. Press and hold the SETUP key on the remote until the LED blinks twice.
3. Press the MENU key on the remote and the remote will begin blinking as it attempts to pair.

How do I disconnect my Comcast remote from my soundbar?

1. Press the Setup button on the remote until the LED at the top of the remote changes from red to green.
2. Press 9-8-6.
3. The LED at the top of the remote will blink green twice to indicate that the remote has been reset.

How do I reset my XR2 remote?

Reprogramming the Remote To change the XR2 Remote to infrared (IR) mode (the non-X1/non-RF mode): Press and hold the Setup button until the light changes to green. The remote is now programmed!

How do I reset my Xfinity remote to my Vizio TV?

1. Turn on your TV.
2. Press and hold Setup until the light at the top of the remote changes from red to green.
3. Enter 9-9-1. The light should flash green twice.
4. Keep pressing CH ^ until the TV turns off.
5. Once the TV turns off, press Setup to lock in the code.
6. Press the TV power button on the remote.

Whats the Setup button on Xfinity remote?

On your remote, press and hold the Setup button. If you don’t have a setup button you can press and hold the Xfinity and Info(i) buttons together. The LED at the top of the remote will change from red to green. Enter 9-9-1.

How do I reset my Xfinity X1 Remote?

1. Press and hold the Setup button.
2. The LED on the remote will change from red to green.
3. Press 9-8-1.
4. The LED will blink green twice to indicate that the remote was reset.

What are ABCD buttons on Xfinity remote?

By default, the A key is Help, the B key is Day-, the C key is Day+ and the D key is Descriptive Video Service (DVS) on/off. You can set these buttons to replay, go to Xfinity On Demand, jump ahead 24 hours in the On-Screen Guide and more.

How do I pair my Xfinity xr11 remote?

Press and hold the Xfinity button and wait for the remote light to change from red to green. Then type in the three-digit code on the TV screen. Press OK to complete the pairing. Once your remote is paired, follow the TV on-screen instructions to set up control for your TV and audio device.

How do you reset the head on a remote branch?

1. Save the state of your current branch in another branch, named my-backup ,in case something goes wrong: git commit -a -m “Backup.” git branch my-backup.
2. Fetch the remote branch and set your branch to match it: git fetch origin. git reset –hard origin/master.

Article first time published on

How do I reset my Luxor remote?

1. From the Home screen, push both the Home button and the Back button simultaneously to bring up the Diagnostics screen.
2. Wait two seconds and press the center scroll wheel.
3. Navigate to the Clear option and press the scroll wheel.

How do I reset my Apple TV remote?

1. Press and hold the Menu and Volume Up buttons at the same time.
2. Hold for two to three seconds.
3. Release the buttons.

Why is my TV not responding to the remote?

A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

What are the codes for Xfinity Remote?

• LG 10178, 11265.
• Panasonic 10051, 10250.
• Samsung 10812, 10060.
• Sanyo 10154, 10159.
• Sony 10000, 11100.
• Sharp 10093, 10165.
• Toshiba 10156, 11156.
• Vizio 11758, 11756.

How do I pair my XR16 remote?

Pair the XR16 Flex Remote to a TV Go to the Remote Settings menu. Press and hold the Voice (Microphone) button and say “Remote settings.” Choose “Voice remote pairing.” Follow the instructions on the TV to select your TV and audio devices.

How do I pair my xr15 remote to my soundbar?

1. Make the Soundbar the receiver output. …
2. Press the A and D buttons on the remote. …
3. Wait until the LED light at the top turns green. …
4. Enter the Soundbar’s manufacturer code. …
5. Wait for the LED light to flash twice (in green) …
6. Test the remote.

How do I reprogram my directv remote?

1. Press MENU on your remote.
2. Select Parental Favs & Setup.
3. Select System Setup.
4. Select Remote or Remote Control.
5. Select Pair/Program Remote, then select the device you wish to program.
6. Follow the on-screen prompts to complete programming your remote.

How do I connect my Comcast remote to my soundbar?

1. Make your Soundbar the Default Output Receiver.
2. Press the ‘Setup’ Button on Your Remote.
3. Wait for the LED Light to Turn Green.
4. Enter Soundbar Manufacturer’s Code.
5. Wait for LED Light to Flash Green Twice.
6. Test the Remote Works.

How do I pair my XR11 remote to my soundbar?

1. Make the Soundbar the Receiver Output. …
2. Press the Setup Button on Your Xfinity X1 Remote. …
3. Wait Until the LED Light at the Top Turns Green. …
4. Enter the Soundbar’s Manufacturer Code. …
5. Wait for the Led Light to Flash Twice (in Green) …
6. Test the Remote.

How do I sync my XR11 remote to my cable box?

Press and hold the xfinity and Info buttons for five seconds. Wait for the Voice Remote light to change from red to green. Follow the instructions by entering the three-digit, on-screen pairing code. Once the on-screen pairing code is correctly entered, your Voice Remote is paired with the TV Box.

How do I program my Cox XR11 RF remote?

1. Turn on the TV you are programming.
2. Press and hold the “Setup” button until the status LED at the top of the remote changes from red to green.
3. Type in the 4-digit or 5-digit code listed below using the number buttons.
4. If the code is entered correctly, the status LED will flash green twice.

What does the D button do on xfinity remote?

D: Use the D button to delete single DVR recordings or delete multiple recordings (e.g., a whole TV series) within a folder. Learn how to delete recordings. (For non-X1 TV Boxes, the D button will enable audio description instead of deleting an X1 DVR recording.)

Where is xfinity remote menu?

To access the main menu, press the xfinity button on your remote. Then, use the left arrow button or the right arrow button to browse through the menu.

How do I reset my head?

To hard reset files to HEAD on Git, use the “git reset” command with the “–hard” option and specify the HEAD. The purpose of the “git reset” command is to move the current HEAD to the commit specified (in this case, the HEAD itself, one commit before HEAD and so on).

How do I revert a remote commit?

1. Go to the Git history.
2. Right click on the commit you want to revert.
3. Select revert commit.
4. Make sure commit the changes is checked.
5. Click revert.