A: Trex Hideaway hidden fasteners are designed to attach to the inside of the custom groove on the edge of Trex- grooved deck boards. The fastener design securely attaches decking boards by holding the edge of the decking board. The fastener is then attached to the support with decking screw provided in each box.

How does Trex hidden fasteners work?

A: Trex Hideaway hidden fasteners are designed to attach to the inside of the custom groove on the edge of Trex- grooved deck boards. The fastener design securely attaches decking boards by holding the edge of the decking board. The fastener is then attached to the support with decking screw provided in each box.

Do Trex hidden fasteners go on every joist?

Secure fastener and continue along the length of the board, adding fasteners at every joist. 6. Slide second board into place, making sure fasteners fit into groove.

Are Trex hidden fasteners worth it?

Hidden deck fasteners are a nice way to keep the surface of your deck looking clear and unencumbered. But they are not the right fastener for all decks. In fact, using hidden deck fasteners inappropriately is a formula for failure. Some deck projects require the stronger fastening power of face screws.

Can you use hidden fasteners on deck stairs?

The most common way to secure decking on stairs is to face-screw the decking boards. … In hardwood decking, you can hide the screw holes with plugs. Wood plugs take a little extra work to install but effectively conceal fasteners.

Does Trex decking warp?

Trex decking resists termites, won’t rot, warp, or splinter-and never needs staining or painting. What’s more, Trex decking is made from 95% recycled materials: That’s an eco-friendly decking choice you can feel great about.

Can you use Trex hidden fasteners on Timbertech?

Most hidden deck fasteners are compatible with the major decking brands like Trex, Timbertech or Azek. The benefit of grooving your own boards is that you can make the groove however you like.

How far can Trex overhang?

Trex is a popular composite material with a maximum overhang of 102mm or around 4 inches. Between one and two inches of deck board overhang is ideal when you attach an outer fascia board, or at least 1 ¾” to 2 ¾” of overhang before installing the fascia.

How do you hide the ends of Trex decking?

Composite decking ends can be finished by picture framing, raised fascia board, painting the ends, attaching decking veneer, composite nosing strips, vinyl stair nosing cove, composite corner trim or plastic end caps.

How much does it cost to gap a Trex?

All deck boards must always be installed with a 6mm side-to-side gap. The Trex Hideaway Hidden Fasteners automatically measure the 6mm gap between grooved edge boards but you must still ensure the 6mm gap with the square edge boards.

Article first time published on

How many Trex boards do I need for a 12x12 deck?

Board lengthBoards required8 FT20612 FT13716 FT10320 FT83

How do you hide the Trex grooved edge?

Install Fascia Boards Installing fascia boards is a common practice to hide the ends of composite decking boards. Like picture framing, it gives the decking a stylish and sleek look while hiding the exposed ends. The difference is, you will install it on the sides, directly over the edges and the rim joists.

Can Camo screws be used on Trex decking?

Can CAMO Fasteners be Used on Trex? The CAMO hidden deck fasteners and clips are approved to work with the most popular composite and PVC deck board brands, including Trex®, DuraLife, AZEK®, Deckorators®, Fiberon, MoistureShield®, and more.

How many Trex starter clips do I need?

You will need 0.75 clips for every lineal foot of decking. For example, 40 feet of decking would require 30 start clips. NOTE: When using hidden fasteners (both start and connector clips), one must be used on every joist.

Are Trex decks hot?

While wood gets hot enough to make walking with bare feet uncomfortable, composite decking gets even hotter. In some cases, Trex can become so hot that it may become unusable under intense, direct sunlight. The darker the Trex decking material, the more heat is retained.

Is Trex decking slippery when wet?

Trex decking is a low-maintenance decking solution that requires a fraction of the work of wood decks and is less likely to get slippery when wet. It still requires occasional attention to keep it looking its best, but you’ll be delighted with the finished results.

Is Trex Select better than Trex Enhance?

Trex Select is also considered slightly more scratch-resistant than Enhance, and the line comes in one more color. Trex Select’s five color options have a bit more range to them, from the warm, reddish Madeira to the rich, cool Winchester Gray.

What is a hidden deck fastener?

Decking can be installed with hidden fasteners to create a clean looking surface that is smooth to bare feet. Hidden fasteners can be used with composite, vinyl, cedar, ipe or other exotic hardwood material. … You can also router the edges of solid deck boards to create a slot to accept deck clips.

What are fixing holding and securing systems?

Fixing is the act of holding and securing an object in place (sometimes called the fixing method); and. Fastener is the holding down and securing connectors used for fixing (sometimes called the fixing device).

Can Trex be removed?

An existing Trex deck needs to be relocated on a house and the wear surface “boards” need to come up for later reinstallation. They are installed with countersunk hex-head screws and over 50% are stripping out in a test area.

Can you repair Trex decking?

If you notice a scratch or damaged area on your Trex decking, fret not! If you have a small scratch or chip, use a composite deck repair kit. If you have a larger scratch, dent, or dings, it is best to replace the entire board. With a few tools, you can easily repair your deck and enjoy your patio.

How much overhang should a Trex deck have?

» ALWAYS follow Trex-recommended gapping guidelines. » Maximum allowable perpendicular overhang for Trex is 102 mm. » All decks require air circulation to keep them dry and looking good. To improve air flow, leave openings under the decking or increase gapping to 10 mm.

Should you pre drill Trex?

You do not have to pre- drill with Trex Escapes. Composite decking is a great alternative to traditional wood decking. When building your deck and railing, it is recommended that code-approved structural material be used as the framing and joists.

What is the thickness of Trex fascia?

The actual Trex decking boards are available in 1 or 2 inch thick boards. The three main types of boards are the Fascia, Grooved Edge and Square Edge. The Fascia is available in either 8 inch or 12 inch long boards. The boards are 0.75 inches thick and 11.375 inches wide.

Can you install Trex with no gaps?

When installing in temperatures below 4.5°C, Trex recommends 10 mm gapping. For docks and heavily wooded areas, Trex recommends a 10 mm gap as well. No gapping should ever exceed 13 mm.

Should you stagger Trex decking?

Composite decking should not be staggered on a deck. Staggered decking requires butt joints, but composite decking expands and contracts with temperature changes making butt joints unsightly.

How far apart are joists for Trex decking?

The majority of composite deck board brands including Trex, TimberTech, and more require deck joists spacing to be at 16 inches O.C. (on center) for standard straight composite decking installation.

What are the disadvantages of composite decking?

• A pricey alternative to wood. Durability comes at a cost, as composite decking is more expensive than wood. …
• Composites aren’t natural. …
• Composite decks aren’t completely maintenance free. …
• You’ll need to comparison shop.

Is Trex more expensive than wood?

An obstacle for Trex is that composites cost a lot more than natural wooden decking. By Trex’s estimates, for a 16- by 20-foot deck, the materials outlay for its Transcend line are $2,714, almost five times that of regular wood ($577).

What is a Trek deck?

Composite Decking. Composite decking—like Trex—is a blend of plastic film and wood fibers. The plastic film that goes into composite decking can include polypropylene or polyethylene. These plastics work well with wood fibers to create a strong, resilient material that is more stable than 100% plastic decking.