Decking boards must NEVER be laid directly on the ground but instead should be fixed to joists of a suitable sub-frame. In most cases we recommend installing your Alpha Composite Decking on a solid concrete base using plastic composite joists.

Can I lay decking directly on concrete?

Decking boards must NEVER be laid directly on the ground but instead should be fixed to joists of a suitable sub-frame. In most cases we recommend installing your Alpha Composite Decking on a solid concrete base using plastic composite joists.

How do you install decking on uneven concrete?

1. Measure and construct the garden deck’s frame. …
2. Lay the deck frame over the uneven concrete surface. …
3. Nail the deck frame onto the support beams. …
4. Finish the levelled deck surface: attach stringers to the frame and fasten decking to the stringers.

What should I put between wood and concrete?

Anyplace where wood meets the ground or concrete, the lumber must be pressure treated. For additional moisture protection, a gasket or strip of closed-cell foam can be installed between the concrete foundation and the sill plate.

How do you attach wood to concrete?

The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a . 22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete.

Can you put wood decking on top of concrete?

Even if your patio is in terrible shape, you can deck over it. Cracks, craters and seasonal movement along cracks are no problem. … (depending on the thickness of your decking and whether or not you put spacers under the sleepers). So any door thresholds adjoining the patio must be at least that far above the concrete.

How do you lay decking on a concrete base?

1. Level Out The Concrete Patio. Check the drainage of the concrete patio. …
2. Begin Planning. Plan the layout of your sleepers. …
3. Find The Perfect Level. …
4. Begin Installing. …
5. Secure The Runners. …
6. Begin installing The Deck Board. …
7. Second Load Of Deck Boards. …
8. And Finally..

Does decking need concrete base?

Yes, they do need foundations. However, you don’t need to set up an elaborate foundation for deck building. There are two ways to build a deck, and how you prepare the foundation slightly differs depending on which one you choose. You can either go for a ground-level deck or an elevated deck.

Can you put decking on top of slabs?

Many homeowners already have paving slabs on their backyards. But the concern is whether you can install decking over them. Whether you can do it or not depends on many factors. In most cases, however, it’s completely okay to do so.

Can you put wood directly on concrete?

Wood in direct contact with concrete, and the dampness often found there, will rapidly decay. To avoid this, use pressure-treated lumber. … This indicates that the wood contains a quarter of a pound of preservative per cubic foot, which is sufficient for use against exposed concrete, outdoors as well as in.

Article first time published on

How do you attach pressure treated wood to concrete?

1. Things You Will Need. A hammer or power drill. …
2. Nails. The simplest and fastest way to attach a piece of wood to concrete is by using a nail. …
3. Concrete Screws. …
4. Heavy-Duty Anchors. …
5. Soft-Metal Shields. …
6. Powder-Actuated Fasteners. …
7. Measure the Holes. …
8. Inserting the Fastener.

Can you build a deck over uneven concrete?

The deck can be built away from the slab. This will make it easier for you to plan a regular deck and not have to deal with the uneven slab. The uneven slab can be removed and the area levelled. Please note that even by removing the slab there may not be enough space between your interior floor and the outside area.

How do you bolt timber to concrete?

If you have a rotary hammer drill it is quite capable of drill through timber (pine framing) using a masonry drill bit. Step 2: With the timber in place and using your hammer drill or rotary drill, drill the hole in the concrete making sure that depth of the hole is about 10mm deeper than the length of the anchor.

How do you secure something to concrete?

Simply drill a hole into the concrete, hold the fixture you’re fastening over the hole, then use a hammer to tap the anchor into the hole. As you drive in the pin, the sleeve expands outward, trapping the anchor in the hole.

How do you attach a wooden floor to concrete without drilling?

Attaching wood with epoxy A common way to secure wooden items to concrete without drill is by using epoxy glue systems. This glue is specifically manufactured for these problems. Before opting for this method, you need to thoroughly clean off and dry the wood for them to bond correctly.

Can I glue wood to concrete?

One of the best ways to secure wood to concrete is also the easiest: epoxy glue. There are certain epoxies that are manufactured specifically for wood-to-concrete use, and you can try using one on its own or combined with nails or screws.

Can Liquid Nail be used on concrete?

Details: LIQUID NAILS® Concrete & Mortar Repair, (CR-805), is a weather-resistant indoor/outdoor acrylic compound with silicone, ideal for repairing and sealing cracks and joints in concrete and masonry surfaces. This easy-gunning sealant dries gray similar to concrete or can be painted.

Can you lay decking straight onto patio?

yes you can – unless it’s a tiny deck or in a very exposed / windy position there’ll be plenty of weight to secure it, on the other hand you might want to secure the odd rafter ‘belt and braces’ style. You could even just notch the rafter and put a big ‘staple’ over it into the ground.

What should you put under decking?

Sand, soil, and mulch are options; stone is better. The best gravel for use under a deck is crushed stone. It prevents erosion, weeds, keeps moisture away from the underside of the deck, and looks much better than mud or weeds.

Do you need gravel under decking?

Gravel. Creating a stable foundation is one of your goals when building a deck. However, you will also need to choose one that will prevent damage to your decks, such as moisture, weeds, and moulds. … It also acts as a mulch, preventing weed growth, which can be very damaging to decks.

Which way should I lay decking?

The correct way to lay decking boards for most decking is smooth-side-up, with the ridges there to prevent rot and mould.

Will no more nails stick wood to concrete?

UniBond No More Nails Original construction adhesive is a heavy-duty glue ideal for mounting and bonding, without the need for nails, screws or hassle. … The multi-functional grab adhesive is suitable for most common building materials, e.g., wood, ceramic, metal, concrete, brick, plaster, stone and most plastics.

Can you glue wood to concrete UK?

You can fit both engineered wood and solid wood flooring over a concrete subfloor. A solid wooden floor needs to be glued down to the concrete. An engineered wooden floor can either be glued down or laid over an underlay.

Can pressure treated wood be placed directly on concrete?

Pressure-treated wood is required whenever you attach framing lumber or furring strips directly to concrete or other exterior masonry walls below grade. Note that this requirement is only for exterior walls, as these may wick moisture onto the lumber.

Will pressure treated wood rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … This allows any moisture that gets between the concrete and the bottom of the post to percolate through the gravel and away from the bottom of the post.