How to clean Rubio Monocoat floors? Surface Care Spray is the only approved cleaner you should use on your floor. This can be done as often as you would normally clean your floors. (Weekly, bimonthly, etc) Vacuuming and dry mopping with a microfiber mop also works well.

What does Rubio monocoat Accelerator do?

RUBIO MONOCOAT Accelerator is the clear Component B that comes with RUBIO MONOCOAT Oil Plus 2C. When mixed with the oil it speeds up the full curing of the oil from 3-4 weeks to 7-10 days. This is extremely helpful when doing many projects in our modern paced lives.

Can I sand off Rubio monocoat?

Mix 1 part Rubio Soap to 100 parts water. Sanding should be done according to the NWFA guidelines. Proper sanding is critical for a professional end result. The surface needs to be evenly sanded, especially when applying colors.

How long does Rubio monocoat take to cure?

Liquid resistance in 48 hours. Full cure within 6 days.

How long does Rubio monocoat last once opened?

The product can be stored up to 12 months in dry conditions After mixing Oil Plus 2C can be used for a maximum of and in its original packaging. 6 hours (depending on the temperature and air humidity).

Is Rubio monocoat waterproof?

Very wear-resistant. Water- and heat-resistant, ideal for kitchens and bathrooms. Very fast curing: 80% in 2 days. A short ‘dry’ maintenance period: after 5 days, the surface can be cleaned with water and soap.

Can you sand Rubio monocoat?

Rubio Monocoat oils are easy to maintain. Maintenance following our recommendations does not require sanding and, of course, maintains the surface so it will not need to be completely re-sanded and refinished.

How much Rubio monocoat do I need?

The correct ratio for Monocoat is 3 parts A (oil) to 1 part B (accelerator). If you use the entire content of both cans, it’s already the correct 3:1 ratio. To determine how much oil you will need, use the following guidelines: Hardwoods: 350 mL will cover up to 175 sq ft.; 1.3L will cover up to 650 sq ft.

Do I need Rubio accelerator?

Although Part A is available without the accelerator, we strongly recommend the use of the component system – Rubio Monocoat Natural Oil 2C Parts A & B – since the oil will cure in 7 days rather than 21 days, virtually eliminating spotting, scuffing, etc. during the cure period.

Can you put polyurethane over Rubio monocoat?

More research indicates poly can be applied over the Rubio in theory but their site isn’t overly positive about doing it.

Article first time published on

Does Rubio monocoat yellow?

Without the yellowing effect of oil, Rubio Monocoat lets even the lightest woods retain their original look, allowing you to make the most of your design choice.

Can Rubio monocoat be used on veneer?

Our finishes work on veneer! Finished this sample for a client, it’s walnut veneer floating shelf finished with #rubiomonocoat (Oil Plus 2C) “silver grey”. It’s so much lighter than a solid wood shelf!

Is Rubio monocoat epoxy?

Rubio EasyPrimer Epoxy 2C – Epoxy is a high-quality water-based two-component epoxy primer. This primer is almost odourless and contains no VOC. In one layer, the primer can be used as a screed hardener for poor quality substrates.

Is Rubio monocoat a sealer?

Spread Rate:~ 72 ft²/LWarning:Do not allow to freeze

What is the most waterproof wood finish?

Oil-based varnish tops the durability charts in terms of water-resistance. The secret lies in its synthetic resins which have been bonded to drying oils and mixed with a thinner. (Faster to cure, varnishes that use urethane for their resin—often labeled polyurethane—dominate the modern market and are easier to find.)

How do you increase sheen Rubio monocoat?

To increase the sheen on a surface finished with Oil Plus 2C, use Universal Maintenance Oil. This will increase the gloss level to about 8-12 units.

Is Rubio monocoat good for furniture?

#2 It Protects Furniture Well While there are other products besides Rubio Monocoat that could achieve a natural look (Oil-based finishes – Danish oil, Linseed oil, etc), they fall short in the durability department. … A testament to its hardiness, Rubio Monocoat was first developed as a product for flooring!

Is Rubio monocoat linseed oil?

We’ve recently discovered (and tested!) a wood oil product worth raving about: Rubio’s Monocoat Natural Oil Finish is a non-toxic, linseed-based product that we love. … Any excess oil is wiped or buffed off after the reaction occurs, and no sanding or additional coats of oil are required.

How do you apply Rubio monocoat to stairs?

1. Apply the oil.
2. Allow 3-5 minutes for the oil to react.
3. Remove ALL excess oil within 10-15 minutes.

How much area does Rubio monocoat cover?

Rubio Monocoat is a Single-coat application As a result, Rubio Monocoat Natural Oil Floor Finish can cover an average 400 sq. ft. of floor per liter.

Can I use mineral spirits before Rubio monocoat?

Clean before finish First, blow of the top with compressed air to remove the bulk of the dust. Then clean the top with a rag damp with Rubio raw wood cleaner, or Acetone in a pinch. I used mineral spirits in my video, but Rubio reached out to me directly to say they don’t recommend mineral spirits.

How do you clean monocoat floors?

Rubio Monocoat Soap or Surface Care Spray Surface Care Spray or properly diluted Rubio Monocoat Soap are the only recommended cleaners for your Rubio Monocoat oil finished floors. These cleaners will remove all dirt and grease thoroughly, without leaving a film or affecting the matte natural look of the wood.

Does Rubio monocoat work?

Rubio Monocoat is a viable alternative to polyurethane only if it actually protects the floor. Carnauba wax, for example, is also a zero-VOC finish, but it is next to worthless as a floor protectant and so we won’t sell or recommend it.

Is Rubio monocoat a varnish?

Rubio Varnish 2C is a wood varnish based on a high quality polyurethane emulsion. The product is developed to give an excellent smooth satin finish to all wooden surfaces.

Is Rubio monocoat UV protection?

Rubio Monocoat’s exterior line combines their zero VOC hardwax oil technology with UV protection. The Hybrid Wood Protector exterior oil is long lasting against UV radiation and wood rot, keeping exterior wood looking fresh – still with just one coat!

Do you have to buff Rubio monocoat?

Don’t do anything you can’t finish within 15 minutes. Any longer than that and the finish becomes hard to remove. Once coated, buff the finish in using a white pad on a sander or manually with a white scotch bright pad. This step not only helps spread the finish but also helps drive it deeper into the wood.

What kind of finish is Rubio monocoat?

One of the newest additions to the wide range of finishes is Rubio Monocoat. It’s a hard-wax oil finish that goes on easily and, unlike standard polyurethane finish, actually permeates the wood itself rather than simply creating a protective barrier on top of it.