To close the key container, turn it so the compartment holding the keys is facing you. Insert the key container into the bottom of the iBox and push up on the key container until it clicks and latches.

How do you reset a lock box without the code?

1. Step 1: Insert the pick to the gap located at the first number. Insert the pick inside the gap located at the first number. …
2. Step 2: Look for the loose spot in the wheel. …
3. Step 3: Repeat the process for the remaining numbers until you open the lock.

Can you cut a lock box with bolt cutters?

Look for appropriate bolt cutters that could cut the lock. Place the blades in the shackle of the lock and position the bolt near your waist. Hold tightly on the grips of the cutters and squeeze the handles until you successfully cut the shackle.

Where is supra shackle code?

Logon to SupraWEB Click on a KeyBox serial number. The shackle code will be displayed in the KeyBox settings.

How do I remove a combination lock?

Spin the dial of your lock several times in the clockwise direction. This will clear the lock. After several spins, stop the dial on the first number of your combination. Spin the dial in the counter-clockwise direction one full rotation, passing the first number.

How do you reset a 4 digit combination lock box?

1. Open the lock using the previous combination. …
2. Insert the reset tool in the hole on the side of the lock. …
3. Push the reset tool in and turn 90° in either direction. …
4. Set wheels to your new combination.
5. Turn and remove the reset tool. …
6. Record your combination in a safe place.

Why is my Supra key not working?

There are several possible reasons for an ActiveKEY to have a Call to Enable or Key Expired message: • The member may not be active due to non-payment or some other issue, • The key could have been out of cell coverage for the last 24 hours, • The radio could be turned off in the key, • A new key that hasn’t been …

How do I reset my Vaultz lock box if I forgot the combination?

We are the manufacturer of Vaultz. To reset your combination lock open the box with your current combination and then with the latch still in the open position, SLIDE the square button in towards numbered dials and HOLD it in this position. While holding the button, set each numbered dial one at a time.

How do you reset a 4 digit combination lock?

1. Pull up the shackle to open the lock.
2. Rotate the shackle 90° counterclockwise and press all the way down.
3. Hold down the shackle and set your own combination by turning dials.
4. Turn the shackle back as normal. The setting is now complete.

What is a Knox supra box?

Supra Lock Boxes, by Kidde, eliminate barriers, reduce injuries, and minimize property damage. … In compliance with International Fire Code, these police and fire department lock boxes are mounted securely near building doors, gates, and other entrances.

Article first time published on

How do I remove my Supra key safe?

Each button should click when pressed. There should be a small amount of movement between the Supra KeySafe ™ lid and the vault. If there isn’t any movement, the keys inside may have fallen forward and jammed the lid shut. We recommend you use a blunt object and tap around the outside of the vault to loosen the key.

What time do supra keys work?

Does the ActiveKEY work the same way? Your ActiveKEY notifies you right away when one of your listings is shown from 8 a.m. to 8 p.m standard time (9 a.m. to 9 p.m. daylight saving time).

What is my shackle code?

A shackle code is a cryptographic system used in radio communications on the battle field by the US military and the Rhodesian Army. It is specialized for the transmission of numerals. Each of the letters of the English alphabet were assigned a numeric value.