A: A shower tray riser kit is also known as an adjustable shower, and it consists of a set of legs and a panel that allow you to keep the tray elevated. This mean you will end up with a shower tray that will be taller, and therefore require you to step up when you go to get into it.

How do shower tray riser kits work?

A: A shower tray riser kit is also known as an adjustable shower, and it consists of a set of legs and a panel that allow you to keep the tray elevated. This mean you will end up with a shower tray that will be taller, and therefore require you to step up when you go to get into it.

Why is my shower tray raised?

The distance that the waste water has to travel may also mean that the tray has to be raised in order to maintain an adequate fall to the point where it exits the building and is connected to the soil pipe outside (usually).

Are shower tray riser kits universal?

Riser kits will always be manufacturer specific and not universal, never choose just a random riser kit it must be suitable for your tray.

What is a shower riser?

Shower riser kits, also known as rigid risers, are fixed height showers which cannot be adjusted to your preference. They connect directly to the taps or shower valve and don’t have a flexible hose on the main system. The water runs from the taps up the pipework and down out of the the shower head.

How do you raise a bathroom floor?

Raising any floor a small distance is just a matter of making the subfloor thicker. This can be done by adding more OSB or by placing tile. Raising a floor more than four inches should be done with new joists and a new subfloor.

How high can you raise a shower tray?

A traditional shower tray height is around 40-50mm and, when combined with a riser kit, can be anywhere up to around 100mm.

What is a riser kit?

A riser kit raises the tray on legs, allowing the waste trap clearance under the tray. The adjustable legs in a riser kit can be useful for installing on uneven surfaces.

What sizes are shower trays?

Type of shower trayWidth and depthHeightStandard shower tray700 mm – 2000 mm25 mm – 80 mmQuadrant shower tray800 mm – 1200 mm25 mm – 80 mmSquare shower tray700 mm – 1500 mm25 mm – 80 mmRectangular shower tray800 mm – 2000 mm0 mm – 45 mm

Can you raise a walk in shower?

If you did want to raise your shower tray, a riser kit can be used—although, with the whole point being easy access, you would then face a step up or step down when getting in and out of your shower enclosure.

Article first time published on

How do you refit a shower tray?

1. Mark out the tray position.
2. Choose the waste position.
3. Line up side panels.
4. Check the tray is level.
5. Attach the waste.
6. Apply sealant.
7. Complete the surrounding walls.
8. Install the side panels.

Do I tile before fitting shower enclosure?

We always advise fitting the shower tray before tiling the walls or installing wall panels as this ensures a more watertight seal around the sides of the tray.

What is a shower riser rail?

Shower riser rail kits are probably the most common form of shower outlet in the bathroom. They consist of a shower head, a shower hose and a rail on which the shower heads slides up and down.

Can you raise a shower head?

The easiest and most affordable way to raise the height of your shower head is with an adjustable shower arm. This type of shower arm attaches to your existing shower arm pipe, acting as an extension, and then you can attach your existing shower head.

Is 1200 Big enough for a walk in shower?

Minimum Walk-In Shower Size Our professional and experienced opinion would advise that as a minimum, the tray should be at least 1200mm in length and anything between 700 and 900mm in width. This will help to ensure that water stays within the shower area.

How high does a shower screen need to be?

When it comes to the shower screen sizes, the recommended standard shower screen height is 1900mm. While 1500mm height tends to be the minimum to ensure the spray from the shower is contained, the height can certainly go all the way to the ceiling.

How high is a standard shower screen?

Keep in mind that most shower screens come in a standard size ranging from 66 to 140 cm in width and 100 to 210 cm in terms of height. However, it is possible to get a custom design to suit a unique space.

How do you raise the height of a floor?

The cheapest ways to raise your floor height include filling the floor with some insulation material, installing a wooden frame subfloor, using a floor leveling compound, and using deck mud. The best approach to use is often determined by the flooring material in use for the project.

What is a raised floor called?

Also called raised flooring, access flooring, or low profile flooring, a raised floor is a construction model in which an elevated floor is built above a building’s original concrete slab surface, thereby creating a hidden void between the two floors that is used for the passage of mechanical and electrical services.

What do you stick a shower tray down with?

Using either tile adhesive, silicone or a weak cement mix (5 parts sand/ 1 part cement) apply sufficient to board to cover entire underside of tray. Apply a minimum of 5mm thickness to lowest point of tray. More may be required in places to ensure tray is level.

Can you fit a shower tray on floorboards?

When learning how to lay a shower tray on a wooden floor, you will need to mark the area where the tray will stand. Next, replace the floorboards within that area with a minimum of 18mm marine ply. You will need to ensure there is access to the waste pipes in the floor beside the tray.

Can you fit a shower tray onto floorboards?

If you’re installing your shower tray onto timber flooring, you need to make sure the floorboards are securely fixed and in good condition. … If they’re not securely fastened, be sure to source thick grade chipboard, and cut it to fit the size of the shower tray.

Does a shower trap need AU Bend?

Newcomers to bathroom plumbing sometimes ask, ‘why do I need a U bend? … The simple answer is that the water trapped in the U bend acts as a barrier to the foul smells that otherwise rise from the sewer or other drainage pipework. This is why it is an absolute requirement in the building regulations.

How much fall do you need in a wet room?

The Slope to Falls is the required incline in the floor that runs from the edges of the designated wet area to the waste outlet. The minimum recommended fall is 15mm and the maximum recommended ratio is 85:1, (i.e. for every 85mm the incline travels towards the waste outlet the floor level will fall 1mm.)

Can you fit a shower tray after tiling?

I’ve seen the tray fitted after tiling ( usually because the seal needs repairing) but would never recommend this method. It is always better to fit tray first, siliconing to the wall and then tile down to the tray and seal again between the tray and the bottom row of tiles.

What flooring is best for wet rooms?

• Vinyl flooring – always the right choice.
• Mosaic flooring as the traditional alternative.
• Ceramic tiles: a great option with a wider variety of options.
• Natural stone for a more natural look.

What do you put under shower base?

Mortar is recommended to use under all shower pans. Mortar reduces the risk of your pan slipping or cracking from an uneven surface.

Can you get a 600 wide shower tray?

Multi Size Rectangular Trays We can offer a wide range of sizes, with widths from 600 to 1200mm and lengths from 700 to a really generous 2000mm. so even in a smaller bathroom it may be possible to fit in a rectangular shaped tray for your shower and benefit from that extra wriggle room.

What is the best type of shower tray?

Stone resin shower trays are fast becoming the most popular choice. This is a mixture of natural minerals and a resin compound that give a fantastic compromise between the heavier ceramic/fireclay products, and the lightweight acrylic trays.