Hooks are one of the easiest rod substitutes out there. To use them, just install some large hooks on either end of the window. Then, drape the swag curtains over each hook, pulling the curtain through the hooks. To get the classic sag that swags have, then you will need to just pull the middle of the dip down.

How do you hang a swag curtain with hooks?

Hooks are one of the easiest rod substitutes out there. To use them, just install some large hooks on either end of the window. Then, drape the swag curtains over each hook, pulling the curtain through the hooks. To get the classic sag that swags have, then you will need to just pull the middle of the dip down.

Which way does a swag hang?

Place the left jabot onto the front rod, then put one swag in the center of the front rod (making sure the fabric side faces out) then put the right jabot onto the front rod. So now you should have both jabots (one at each end as always) and a swag that should currently just be hanging straight down in the center.

How do you hang a swag on a window?

The best place for a swag is on the window sill of your window or on your front door in place of a wreath. With the windows you can attach the Christmas swag to the sill using cup hooks or by using a suction cup hook on the glass, depending on how big your swag is.

How do you wear sheer over a rod?

1. Lay the sheer out straight and fold it in half. …
2. Place the center of the sheer on the center of the curtain rod and attach with a large binder clip or a piece of masking tape. …
3. Wrap the sheer over the curtain rod several times on each side of the binder clip.

How long should swag curtains be?

A general rule of thumb is that a swag 45-inches across the top edge requires about 2 yards of fabric. Online fabric calculators, or pattern envelopes, provide the exact amount of fabric required based on fabric type and pattern, mounting method, fabric width and swag measurements.

How do you swag sheer curtains?

Ask someone to hold the curtain from one end and keep unfolding the curtains on each end. Take off the straight pin and pull down the curtain slowly from the centre area to create a draping effect. Adjust it properly so that it looks similar from both sides. Pull the draping gently down in the middle for a longer swag.

How do you make a rosette with a window scarf?

Insert the scarf through the scarf holder from behind (nearest the window frame) and poke the scarf out through the center of the holder. Pull the scarf out gently from the front of the holder to make small folds in the scarf that will resemble a rosette. Adjust the fabric rosette until you like how it looks.

How do you hang a curtain and valance on one rod?

1. Shirr the curtain on the rod. …
2. Create temporary folds in the swag valance, lengthwise, as if you were creating a paper fan. …
3. Drape the swag valance over your arm, folding it in two. …
4. Place the swag valance over the top of the rod and your curtain.

How far should a valance hang?

For most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling.

Article first time published on

Are swag valances out of style?

If when you think of valances, you imagine droopy valances without form made of some cheap polyester jacquard, then they definitely are dated and most definitely out of style. … Just like any product, valances are still used quite frequently by professional interior designers, even in the most modern of homes.

How do you hang swag curtains with knots in corners?

Adjust the swags and the curtain to ensure that both hanging sides are equal and the swags are how you want them. Carefully grasp one side of the curtain where it meets the end of the drapery rod. Fold it in half to make a loop and pull the hanging side through the loop to create a loose knot.

How do you dress a window without curtains?

1. Blinds.
2. Frosted glass.
3. Glass bottles.
4. Lace.
5. Plants.
6. Privacy screen.
7. Roman shades.
8. Stained glass.

How do you hang a double rod curtain?

1. Step 1: Measure Your Curtains. Clean and inspect the window and frame for leaks and damage. …
2. Step 2: Gather Your Supplies & Tools. …
3. Step 3: Prepare the Window Space. …
4. Step 4: Install Your Double Curtain Rod Brackets. …
5. Step 5: Hang Your Curtains.

How do you make sheer curtains less sheer?

Finding panels to put behind sheer curtains By choosing a liner that’s the same shade (or a shade darker) than the sheer panel, you essentially preserve the color of the sheer panel. In other words, you won’t see an unsightly liner peeking through the sheer. Instead, it will all look like seamless, rich color.

How do you join sheer curtain panels?

Place the curtain panels on top of one another, right sides together. Then pin the vertical edges you unpicked together. If your fabric is quite thick you may opt to clip the two panels together instead. If you’re working with patterned panels check that the pattern matches before and after pinning.

How do you measure swags and tails?

Starting from the top of the pole on the left-hand side, take your flexible measuring tape and re-create the arc of the swag over to the top right-hand side of the pole. This is your swag measurement. You need to measure the lowest part of the draped swag in order to get the appropriate amount of fabric.

How much wider than the window should a valance be?

Most valances should only be 1-1/2 to 5 inches wider than the window if the valance hangs by itself or over a Roman shade. It should be 10 to 30 inches wider than the window if it’s hung over a pair of custom drapes. If the valance is gathered, its total, flat width should be 2 to 3.5 times the width of the window.

How do you measure fabric for swag?

Swags – Based on an average of 44″ per swag, you will need 2 yards of fabric per swag. Jabots – Double the longest length, add 4″ and divide by 36. This will give you the number of yards needed for a single pair of Jabots.

What are the different ways to hang curtains?

1. Rod Pocket. The most basic heading is the rod pocket (also known as pole pocket) style. …
2. Curtain rings. Using curtain rings is a popular choice. …
3. Eyelet. …
4. Tab Top. …
5. Tie Top. …
6. Pencil pleat. …
7. Goblet pleat. …
8. Pinch pleat.

How do you hang curtains and valances?

1. Gather Materials. Before you start hanging your window treatments, make sure you have the right tools to get the job done. …
2. Choose the Correct Hardware. …
3. Install Curtain Brackets. …
4. Install Valance Brackets. …
5. Hang Your Curtain. …
6. Hang Your Valance.

What are cascade curtains?

The center cascade in a curtain valance softens the look of your windows. It is also referred to as a swag and is usually accompanied by a jabot — or fall — on either side. The cascade is designed in the shape of a half moon, giving it a soft, draped look with deep folds.

How do you make swag curtains with rosettes?

Pull a puff of swag fabric through the opening. Move the rosette out of the way temporarily and wrap a rubber band around the puff to secure the fabric. Put the rosette over the puff of fabric and fluff out the fabric to hold the rosette in place and hide the rubber band and the inside edge of the rosette.

How do you keep a scarf valance from slipping?

Keep the swag from slipping by attaching the underside of the valance to the top of the rod with two-sided tape.

How long should a valance hang on a window?

The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining.

Should my curtains touch the floor?

Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.