Cedar is the most common material for construction of exterior shutters because of its resistance to both insects and decay. It is a straight wood that finishes very well and can withstand harsh outdoor conditions well.

Is Cedar good for shutters?

Cedar is the most common material for construction of exterior shutters because of its resistance to both insects and decay. It is a straight wood that finishes very well and can withstand harsh outdoor conditions well.

How do you use shutter clips?

1. Push a shutter clip partially onto the ribs at each corner of the shutter with. …
2. Hold the shutter against the mounting surface in the position where it will be attached. …
3. After the Shutter-Clips are in position and fastened to the. …
4. Read all of Step 4 and view Figure 4 before installing Shutter-Clips.

How should shutters be hung?

When open, shutters should be located tight to the window covering all or part of the window casing and projecting outward at the window edge. Architecturally, it is not necessary for a feature to actually be functional; however, it must always appear functional.

Which direction do shutters go?

The correct installation of a fixed louver shutter should have the shutter louvers facing down and towards the back when the shutter is open (when it is not covering the window).

How long do cedar shutters last?

Generally speaking, you may get anywhere from 10 to 20+ years out of use out of your shutters. However, they are more vulnerable to rot, termites and moisture damage comparatively.

How far should shutters be from window?

In most cases, the height of decorative shutter that is most appropriate is from the top to the bottom of the window trim. If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract.

What kind of cedar is used for shutters?

Western Red Cedar shutters are a popular alternative to the more popular wood species such as Basswood.

Will cedar shutters warp?

Cedar is the most commonly used wood as a material for creating exterior shutter. … The chief reason for using cedar is that it’s dimensionally stable. This means it’s resistant to warping and twisting. Apart from that cedar wood contains a natural oil that prevents bugs, decay, and moisture.

Are shutters hard to install?

Install. Installing shutters won’t take long, even if you’re a DIY novice. In fact, most of our customers fit their shutters within 60 minutes – and we’re here to help you. Simply select the type of window and the particular guide you need to download your Step By Step Installation Guide.

Article first time published on

Is it easy to install shutters?

Adding shutters to a house is an easy way to boost its curb appeal. Shutter installation is a straightforward project and, depending on how many windows you have, the job can be completed in an afternoon with the right tools and some basic DIY skills.

Do you close shutters up or down?

Tilting the shutters all the way down is a good position to leave your shutters in if you’d prefer not to adjust them with the light. … But if you want to maximise the light coming into the room without opening the louvres completely, tilt the shutters downwards to bring as much light into the room as possible.

What do you do if your windows are too close for shutters?

1. Attach a large (double size) shutter, the size of the window on each end.
2. Mount double shutters at each end. …
3. Mount four shutters in the manner you would normally if the window were not Ganged.

What are shutter spikes?

What are shutter spikes? Shutters Spikes are made from the same material as the shutter: a plastic called Polypropylene. They have a button head finish and a serrated shank. Their only purpose is to fix external, decorative shutters to the wall.

Where do you drill holes in shutters?

To help ensure proper alignment mark and predrill holes using a ¼” drill bit into the shutter before attaching it to the wall. With the shutter in location against the wall, drill through the shutter into the wall 2½” deep. Make sure you drill holes deep enough so the shutter fastener doesn’t bottom out.

What kind of wood do you use for board and batten shutters?

Western Red Cedar is the most common material for building exterior board and batten shutters in the industry. Cedar has many of the same qualities as Redwood, yet is less dense, making it easier to sand and finish.

Should shutters be up or down for privacy?

The direction ⁠— up or down ⁠— to close blind slats is a matter of personal preference, but if you want more privacy, tilt them up, with the rounded side facing out. With window blinds tilted up, passers-by can’t see in: The convex side faces the window, creating less space through which to view.

Can shutters be lifted up?

The most innovative feature is the ability to raise your plantation shutters. Lift from the bottom and change the height of the shutter to any size within the window.

Do you open your plantation shutters?

In most instances, plantation shutter louvres are left closed when coverage is required, with the louvres then being opened to allow light into the room. However, it may also be possible to open and close the shutters themselves, depending on the specifics of the installation.

Should shutters be the same length as the window?

Window WidthShutter Width32″ – 40″14.5″-16.25″-17.75″

How much does Lowes charge to install shutters?

How much does it cost to install window treatments? Basic installation is $99 for up to nine window treatments.

Should you put shutters on back of house?

Shutters dramatically improve the look of a home from any angle. If you want to amplify your home’s style, then adding shutters to the back is a no-brainer. It’s an especially easy choice when you think about all the other benefits that functional exterior shutters can provide.

Do you have to seal cedar shutters?

Cedar offers a durable option for exterior and interior building projects with natural resistance to rot and decay, so a protective finish is optional. … If you’re using cedar for an outdoor project, give it a light seal coat to guard against moisture and sunlight.

Why are wood shutters so expensive?

Why are plantation shutters expensive? Plantation shutters cost more because they are a long-lasting window treatment. Their materials are often pricier than those used for blinds and curtains. They take much longer to install as well.

Which wood is best for window shutters?

• Basswood – an affordable and smooth type of hardwood, this pale wood is a very popular choice for internal shutters. …
• Poplar – Fairly durable and economical, poplar is another common hardwood which is used to make shutters.

How thick should wood shutters be?

Thickness, Width, Height Our default standard thickness is 1 5/16″, but that can be varied from 7/8″ to 2 1/4″ to match existing exterior shutters. The length and height can be specified to the nearest 1/16″ inch.

How long do exterior wood shutters last?

These shutters can last up to 20 to 30 years (or another 30 years if stripped and recoated!), for an affordable price, with little maintenance.

How thick are cedar shutters?

Board & Batten Cedar Shutters Constructed from 1″ thick equally spaced, custom sized boards.

Can you stain cedar?

Staining the cedar is the absolute best way to ensure this, especially in areas that have four-season climates. Since Western Red Cedar naturally lacks pitch and resin, it allows for countless staining options and will accept stain very well if applied correctly.

How much do Bermuda shutters cost?

TypePrice Per Square Foot24″ by 42″* Shutters + 1 Hour of InstallationAccordion$15 – $30$105 – $210Bahama$20 – $35$140 – $245Colonial$25 – $35$175 – $245Roll-Up or Roll-Down$25 – $60$175 – $420

How much should I pay for plantation shutters?

National Average Cost$2,350Maximum Cost$6,000Average Range$1,450 to $3,360