DIG A TRENCH AROUND THE BED Dig a trench along the edges of the bed With a spade, dig a trench along the edges of the bed to a uniform depth of 3 to 4 inches — enough to let the edging stand at least 1/2 inch above ground level. Dig straight down to create a vertical “wall” that will support the edging.

How do you stop landscape edging from sinking?

Fill the trench with 2 to 3 inches of gravel or crushed rock and pack it down firmly with a hand tamper until level; the compacted gravel creates a well-drained, sturdy base that prevents the edging materials from sinking over time.

How do you install landscape fabric edging?

1. Measure the area.
2. Remove existing weeds.
3. Add soil amendments.
4. Level the soil surface.
5. Lay the landscape fabric.
6. Secure the fabric.
7. Plant your shrubs and/or flowers.
8. Add mulch.

How do you install lawn edging?

1. Plan. Mark out the border that you want to edge – whether for a new flowerbed or to smarten up an old one. …
2. Dig a trench. …
3. Lay the edging into place. …
4. Pull down the soil. …
5. Hammer in the stakes. …
6. Compact the soil.

How do you dig a landscape edging trench?

Just take a flat-edged shovel and dig straight down 3 inches along the outer edge of the lawn. Then dig a second slice that’s at a 45-degree in the direction of the border or bed. So you’ll end up with a trench that’s straight downward on the lawn side and angled up to the border. Remove the extra soil.

How do you install landscape timber edging?

1. Mark the Border Path. Tie one end of ​a mason’s line around a stake. …
2. Cut Through the Turf. …
3. Level and Tamp the Ground. …
4. Add Landscape Fabric (optional) …
5. Install the Timbers. …
6. Construct the Corners. …
7. Cut Angles to Make Turns. …
8. Pin the Timbers With Rebar (optional)

What do you put around the edge of a patio?

1. Plant shrubs or flowers directly into the ground along the edge.
2. Build planter beds or boxes (be sure to account for this in your initial patio design planning)
3. Create your own garden along your patio space!

Can I use merbau for garden edging?

Lift the look of your outdoor living space by adding SpecRite Merbau Garden Edging, the perfect solution for separating your garden beds and lawn areas. Merbau timber is an extremely durable, long lasting, tannin rich hardwood. Perfect for use outdoors, it looks great and lasts provided it is properly maintained.

How do you install bamboo edging?

Place the bamboo in the trench and use hook stakes (not included) to secure the steel wire between the bamboo into the ground. Use a hammer to gently hit the stake and catch the wire. You will only need 3 stakes per bamboo edging section to properly secure in place.

Is landscape edging necessary?

Edging keeps lawn grass from invading the garden beds, but isn’t necessary if you cut a narrow trough an inch or so deeper than the grass roots, all around your beds, and maintain it weekly. … Edging goes in with the little curled-up “V” at the bottom facing the bed, not the lawn.

Article first time published on

How do you install plastic lawn edging UK?

To install plastic edging between a lawn and a garden, inset a spade vertically all along the turf edge to a depth equal to the edge’s height, and push the earth forward, toward the garden, creating a trench with a vertical wall on one side and a wall with about a 45° angle on the other.

What is Bender board made of?

Bender Board is made of 100% recycled polyethylene plastics recovered from the blue box collection as well as other sources. The result is a pliable and strong “green” product that is able to contour evenly and consistently.

Can you put new landscape fabric over old landscape fabric?

If you choose to lay new fabric, use only top quality landscape fabric. … Be especially careful when pulling up landscape fabric around existing plants. Plant roots may have grown through the old landscape fabric. Without harming these roots, do your best to carefully cut away any bits of fabric around the plants.