Multiply the total length by the width to obtain the area of soffit needed to fill the gap. For example, if the total eaves length is 110 feet, and the width is 2 feet, multiply 110 by 2. The result, 220 in this example, is the number of square feet of soffit required.

What are the dimensions of vinyl soffit?

Economy Solid Vinyl Soffit – Non-Ventilated.

How wide is t4 soffit?

Traditional 4″ exposure width. Won’t warp, rot or peel; no staining or painting – just rinse occasionally with a garden hose.

How much is a piece of soffit?

Soffits are usually sold in 12 foot sections with varying widths for an average between $10 to $23 per section or about $16, on average. This translates to about $1-$3 per linear foot.

How long is a piece of soffit?

Soffit panels are available in 12-ft. lengths, 12- or 16-in. widths and vented or unvented.

How thick are vinyl soffits?

12” O-Vent Soffit: Vented Triple 4” profile with Single Nail Hem, 12in. wide exposure configured as three 4” panels, thickness 0.039” ± 0.001”, 12ft length. Free air space: 4.18 in²/ft².

How many pieces are in a box of soffit?

Triple 4˝ packaged 16 pieces, 12´0˝ long, 1.92 squares per carton.

How wide is f channel?

x 1/2 in. x 12.6 ft. White F-Channel.

What is under vinyl soffit?

Soffit is the material that covers the area beneath eaves, while fascia overhangs the roof rafters [source: Vinyl Siding Institute]. Before you begin installing vinyl soffit and fascia, be sure to do the following: … Check that the undersides of the eaves are straight and even [source: Home Remodeling Technology].

How do you replace soffit panels?

1. Remove Shingle Mold. Pry the narrow shingle mold from the fascia using a flat bar. …
2. Remove Rotted Fascia. Remove the rotted section of fascia. …
3. Remove Old Soffit. Pull down to remove the old soffit. …
4. Remove Rotted Rafter. …
5. Attach Cleat. …
6. Attach New Rafter. …
7. Seal Replacement Soffit. …
8. Attach Replacement Soffit.

Article first time published on

What type of plywood is used for soffits?

Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar. Common, but much less durable, is Masonite or similar fiberboard soffit, as well as much more weather-resistant fiber-cement.

What is the cheapest soffit?

Soffit Cost These costs also vary depending on material type. PVC or plastic soffits are generally the cheapest option at $6 to $12 per linear foot and are a popular choice among homeowners because they’re customizable.

How wide is double 5 soffit?

Double 5″ Soffit – Perforated Features: Double 5” profile (10” wide)

What is T4 soffit?

About. Alliance T4 Premium Vinyl Soffit protects the underside of eaves and porches and provides proper airl flow to the attic. Solid panels can be installed vertically at entryways and gable ends. This premium vinyl soffit is available in two textures – grain and smooth.

Do they make black vinyl soffit?

Royal® Building Products Launches Black Soffit in Exterior Portfolio® and Royal® Vinyl Lines. Columbus, Ohio​ (June 15, 2020) — Royal® Building Products, a Westlake company, today announced the addition of black soffit to their Exterior Portfolio® and Royal® vinyl lines.

How wide is aluminum soffit?

Panels are 12” wide with a “vee” groove every 6” center-to-center and furnished in continuous lengths of up to 25′. Minimum panel length is 24”. The PAC-750 and PAC-850 Soffit panels can be lanced to allow for airflow and under-eave ventilation.

What is soffit trim?

Soffit is another element of a home’s exterior that helps to keep moisture out—it’s the underside of a roof’s overhang. Together, soffit, fascia and trim give homes a safeguard against water intrusion, while also providing a cohesive finished appearance.

Can you staple soffit?

66), each soffit panel should be fastened through the nail hem and either into the wood fascia or into a wood shim using nails, screws, or staples. … Cut and install soffit double channel lineal or back-to-back J-channel.

How much vinyl soffit is in a box?

Box Contents A box of vinyl siding contains two “squares.” A square in construction lingo equals 100 square feet, so a box of vinyl siding will cover 200 square feet. That’s only a starting point, however.

How many pieces of vinyl siding are in a 2 square box?

The number of pieces of vinyl siding in a box depends on the width and length of the pieces. A carton typically contains between 14 and 24 panels and covers 100 ft² or 200 ft², or 1 or 2 squares, and will cost from $90 to $250 a square.

How much does a box of aluminum soffit cost?

Aluminum Soffit CostsZip CodeBasicBestInstallation Cost$252.00 – $384.00$504.00 – $648.00Total$372.00 – $576.00$744.00 – $984.00Aluminum Soffit – Total Average Cost per square foot$3.95$7.20

Does vinyl soffit come in colors?

Vinyl soffit completes as well as compliments the look of your home. Available in a variety of textures and colors which will add the perfect touch to any project.

Do you nail soffit tight?

Do not nail tightly. If you’re using Beaded T2″ panel as soffit, nail both the channel and the soffit every 8″-12″ to create added support. … If the soffit will turn a corner, cut and install the channel so there is 1/4″ for expansion at each of the adjoining walls.

What's the difference between J channel and F channel?

F channel is usually attached to beams or studs of the house, along the underside of the roof overhang. It provides a sort of shelf where the ends of the soffit pieces rest. … If you choose J channel, you’ll have to install twice as many pieces, both to hold up the soffit and to cover the edges.

What is F channel for soffit?

F-channel is used to hold the soffit onto your house. Soffit is the vinyl siding that makes a ceiling under an overhang. The F-channel is a thin vinyl strip that is sold where siding is sold. The upside down F creates a shelf for the soffit to slide into and rest on.

How long is J channel for soffit?

DescriptionProduct CodeLength Per Piece (ft)3/8″ J-Channel for T4/Q4 SoffitBWFJ3812′1/2″ J-Channel for Double 6″ SoffitAWFJ1212′3/4″ Wide Face J-Channel for VinylAWFJ3412′

Can I use plywood for soffit?

plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces. Top-quality acrylic latex house paint systems perform best and are the only systems recommended for A-grade faces.

Can you put new soffit over old?

If you happen to be working on an older home, most contractors and homeowners find that they will need to install their vinyl soffit over top of old wood. This can definitely be done, but you will need to take several precautions to prevent the wood from rotting beneath this new layer.

What is the best wood for soffits?

Although unsanded and touch-sanded grades of plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces.

Can OSB be used for soffit?

Re: OSB Vs Plywood for soffits. OSB resists moisture much better, that’s just a fact, but as mentioned you have the OSB look which is an unattractive finished look to many people. It does take more paint, but not as much as some think unless you expose the wrong side of course.

Can Luan plywood be used outside?

It will be outdoors, but only rarely wet. This doesn’t need to be structural, just hide the joists. Quarter inch thick would be fine. I’ll put some battens on for decoration and it will get a solid stain.