Put a wrench socket of the correct size on the head of the bolt securing the blade to the blade holder, and apply force to the wrench handle in the counterclockwise direction to loosen the blade bolt. The bolt may have a 1/2-inch, 5/8-inch or 3/4-inch head, depending on mower model.

How do you loosen a nut on a lawn mower blade?

Put a wrench socket of the correct size on the head of the bolt securing the blade to the blade holder, and apply force to the wrench handle in the counterclockwise direction to loosen the blade bolt. The bolt may have a 1/2-inch, 5/8-inch or 3/4-inch head, depending on mower model.

What size is the nut on a lawn mower blade?

What size are the tractor cutting blade retainer nuts and what direction should they be turned? The retainer nut on most of our riding mower blades are a 5/8″ thread diameter. This sized thread diameter nut normally requires a 15/16″ wrench or socket tool in order to remove/install.

Is the bolt on a lawn mower blade reverse threaded?

Generally speaking, most lawnmower blade nuts are reversely threaded to firmly secure the blade onto the drive shaft of the engine. To remove the blade on this type of mower, the blade’s retaining bolt should be turned to the left or counterclockwise direction. …

How do you remove a stuck lawn mower blade?

Remove a Stuck Blade with Leverage Once it’s secure, place a socket wrench over the bolt, (making sure it is the correct size), and attach the breaker bar to the socket. Use the breaker bar as the socket wrench handle and loosen the bolt. Once it is loose, unthread the bolt by hand and remove the blade.

Are mower blade bolts left hand thread?

The overwhelming majority of mower blade retainers (almost all are bolts) are normal right hand thread. The best indicator that the method of retaining the blade(s) might deviate from the norm would be found in the side which the grass is discharged from the mower deck.

Which side of the lawn mower blade is up?

The most common and easiest way to tell which side of your lawn mower blade is up, is to look for the label. Most manufacturers will stamp at least one side of the blade with a direction label. These can say things like: “This Side Up”, “This Side Down”, or “This Side Toward The Grass”, depending on the brand.

How often should lawn mower blades be replaced?

A good rule of thumb for the average homeowner is to replace your mower blades annually. You may also think about replacing them if they become damaged. Dig up that product manual if you want a more clear-cut answer. Always make sure to take protective measures whenever sharpening your mower blades at home.

Do I really need a torque wrench for lawn mower blade?

A torque wrench is critical for jobs like lawn mower blade fitting and flywheel fitting, as you already know, overtightening these components could cost you an engine.

Does wd40 loosen bolts?

If the bolt is stuck in place because of rust, you can use a bolt loosening spray such as WD-40 Penetrant Spray. This penetrating oil provides deep lubrication to loosen the nut or screw.

Article first time published on

Are lawn mower blades directional?

Most lawn mower blades rotate in a clockwise direction (counter-clockwise when viewed from below), and as such have the cutting edge on the right side. If you are unsure of how your mower rotates, check the position of the discharge chute; if it is on the right side angled back, the blade turns clockwise.

What happens if mower blade is upside down?

Mower blades have a cutting edge at each end. … It is common to install a blade upside down. When this happens, the lawn mower will not cut correctly, or it could damage the mower.

How sharp should mower blades be?

Mower blades should be aggressively sharp, but not as sharp as a razor’s edge. You should be able to touch the blade with your hand without getting cut. Contrary to popular belief, a lawn mower blade with a razor sharp edge will not cut grass better.

Which side of mower blade faces down?

To determine which side of your lawn mower blade is up, first figure out which side is the sharp cutting edge, and which side is the blunt edge. Look for a sticker indicating which side goes up and which side faces downward. The cutting edge should face the grass while the dull edge should face the deck of the mower.

Why does my lawn mower leave a line of uncut grass?

Rows or streaks of uncut grass in your lawn may be the result of your lawnmower’s cutting blades being dull or otherwise damaged. Dull blades are the result of normal wear and tear from mowing. … Occasionally, one or both blades become warped, curled or nicked. In any one of those cases, it’s best to replace the blades.

How many foot pounds does it take to tighten a lawn mower blade?

Most lawnmowers require a 9/16-inch socket. Adjust the setting on the torque wrench to 30 foot pounds; use the directions that come with the wrench to perform the adjustment.

What causes a lawn mower blade to keep coming loose?

One common cause of loose blades is actually running over a rock, trunk or anything solid. That kind of impact can do some serious damage to a blade, and if it’s bent it could end up ruining your crankshaft, which will basically KO your mower and make it useless. So before you proceed to tighten the blade.

How do I know if I need a new mower blade?

• It’s more than two years old. As a general rule of thumb, a mower blade should be replaced every one to two years for safety and performance purposes.
• It’s bent. …
• It’s dull and you’ve already sharpened it twice. …
• There are dents, gouges and/or pieces missing.

Do I sharpen new mower blades?

As mentioned above, brand new lawn mower blades do not need to be sharpened because they are always sharpened during manufacturing. … However, lawn mower blades do generally need to be sharpened at the beginning of each new season.

How often should lawn mower spark plugs be changed?

For standard lawn mower and small engine maintenance, you should check and/or replace spark plugs: once a season. every 25 hours of use. if your lawn mower our outdoor power equipment won’t start.

Why does my flymo not hover?

Why Won’t My Hover Mower Hover? A hover mower works by creating a cushion of air underneath the lawn mower. This makes them easy to manoeuvre across the lawn. … If the lawn feels spongy underfoot this can be as a result of thatch and moss, which can prevent it from hovering.