Check the time and date on the controller to make sure it is accurate. … Rotate the dial to the “Watering start time” position and press the “+” or “-” keys to reprogram the time of day the watering cycle begins.

How do you program an old Rainbird sprinkler system?

1. Check the time and date on the controller to make sure it is accurate. …
2. Rotate the dial to the “Watering start time” position and press the “+” or “-” keys to reprogram the time of day the watering cycle begins.

How do I set up Rainbird?

1. Download the Rain Bird App.
2. Check the signal strength at the controller location.
3. Insert LNK WiFi Module into the Accessory Port on compatible controller models.
4. Verify LNK WiFi Module is alternating blinking red and green.

How do I reset my Rain Bird ESP controller?

Turn the dial to Seasonal Adjust. Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word “CLEARED” on the screen. Your ESP-Me is now restored to the factory default settings.

What is a Rainbird day cycle?

DAY CYCLE: The number of days before the cycle repeats, i.e., 7-day cycle: one week long: 3-day cy- cle: once every three days. WATERING DAYS: set weekdays ON or OFF as watering days (7-day cycle). Set “Today’s” number within the cycle (1 through 6-day cycles). START TIME: The time of day that the program begins.

How do you program Rainbird cycle and soak?

So rather than watering for 24 minutes straight, your controller will “Cycle” for 8 minutes, wait 52 minutes for the water to “Soak” in, Cycle for another 8 minutes, wait 52 minutes for the water to soak in again, and then finally water for a final 8 minutes, for a total of 24 minutes.

What is the Rainbird controller password?

The controller password is restricted to letters and numbers, 4-8 digits in length. No special characters. If you use a special character it will not be registered in the password. As an example, if you typed in [email protected], the password would be stored as 1234.

How do I schedule my sprinkler system?

Sprinklers should be set to run for about 30 to 35 minutes at a time twice a week. Your goal is at least 1″ of water a week for your lawn. When it’s hot and dry, double the water times while still trying to water just 2 or 3 days a week.

How do I reset my Rainbird WiFi module?

Reset the WiFi module. While plugged in, press and hold the button on the WiFi module for 5 seconds. The LED should turn Amber colored, and then red, followed by three green blinks, followed by red and green alternating (WiFi Hotspot).

Why won't my Rainbird sprinkler pop up?

Find any broken sprinkler heads. — A broken sprinkler head is one of the most common reasons that your pop-up sprinkler heads do not work properly, even when the water is turned on at a full blast. … To resolve this issue, simply clean the sprinkler heads. Be sure to clean both the head and the plastic screen basket.

Article first time published on

Should solenoid be on or off?

Avoid over-turning the solenoid in either direction, as this can cause damage to the components or cause pressurised water to escape the solenoid. When you hear water rush through the device, it’s easy to tell that the valve has opened successfully.

What is Rainbird cycle and soak?

Cycle+Soak is an exclusive feature in Rain Bird Central Control software that allows users to precisely schedule and apply water to be consistent with the infiltration rate of the soil in each specific area around the golf course.

How do you use a sprinkler cyclic?

SprinklerModCyclicTypeTile entity

Where do I find Rainbird controller password?

Press on “Controller Info” down arrow and enter a new password. The controller password is restricted to letters and numbers, 4-8 digits in length. No special characters. Don’t forget to press “Done” at the top right once the password is entered.

What should I set my rain sensor to?

IFAS researchers recommend rain sensor thresholds of 1/4” for 2 or 3 day per week irrigation with no more than 1/2” for 1 day per week irrigation. Remember, the lower the setting, the more water saved.