Remove the battery pack or power cord.Rotate the blade clamp counterclockwise and hold to open.Remove the blade from the saw.Insert the saw blade until it is fully seated. … Release the blade clamp to secure.

How do you change a rigid Sawzall blade?

1. Remove the battery pack or power cord.
2. Rotate the blade clamp counterclockwise and hold to open.
3. Remove the blade from the saw.
4. Insert the saw blade until it is fully seated. …
5. Release the blade clamp to secure.

What is the difference between DCS381 and DCS380?

“DCS381 20V MAX* reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft” vs “DCS380 20V MAX* reciprocating saw with 4-position keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft”.

How do you remove a broken blade from a Ryobi reciprocating saw?

1. Unplug the saw from its electrical source. Lift the blade release lever located toward the front of the saw on the left side.
2. Remove the broken blade from its housing in the front of the saw. …
3. Insert the new blade into the housing. …
4. Restore power to the unit.

How do you cut straight line with Sawzall?

With the reciprocating saw held in front of you in line with your stomach, press the shoe against the material, aligning the blade to the marked line as closely as possible. Angling the saw slightly downwards, it will begin to rip through the material with the pressure you’ve applied.

How do you remove a broken blade from a Craftsman reciprocating saw?

1. Turn off and unplug the saw from the power source.
2. Remove the Allen wrench from the saw’s holder. …
3. Insert the Allen wrench into the hole on the side of the saw body toward the front, where you can first see the blade sticking out. …
4. Loosen the blade clamp screw with the Allen wrench. …
5. Slide the blade out from the clamp.

How do you clean a Sawzall?

To clean off accumulated dirt and grime on your power tool, most manufacturers recommend a damp rag and a bit of mild soap. Avoid solvents and harsh cleaning chemicals – these can degrade the plastic and rubber parts of your reciprocating saw.

Does Ryobi reciprocating saw come with blade?

Backed by the RYOBI 3-Year Manufacturer’s Warranty, the 18V ONE+ Cordless Reciprocating Saw includes a 6” wood cutting blade and an operator’s manual. Batteries and chargers are sold separately.

Do all reciprocating saw blades fit?

Yes, reciprocating saw blades have a universal shank that is standardized to fit all reciprocating saws.

Is DCS393 brushless?

Battery Technology: Lithium-Ion (Li-Ion) Battery Capacity: 6 Ah. Motor Type: Brushless. Model: DCS393.

Article first time published on