If your toilet handle is loose or hangs down, it won’t properly allow you to flush your toilet, so you need to get a replacement. Toilet handles are easy to remove and install on your own in around 15 minutes. All you need to do is unscrew the old handle and then put the new handle in its place.

Can you replace just the toilet handle?

If your toilet handle is loose or hangs down, it won’t properly allow you to flush your toilet, so you need to get a replacement. Toilet handles are easy to remove and install on your own in around 15 minutes. All you need to do is unscrew the old handle and then put the new handle in its place.

How do you replace a lift arm on a toilet?

1. Buy a New Handle. Before purchasing a new toilet handle, check to see where the handle is located on your toilet tank. …
2. Remove the Toilet Lid. Lift the lid from toilet tank. …
3. Detach the Lift Chain. …
4. Remove the Handle Mounting Nut. …
5. Remove the Old Handle. …
6. Insert the New Handle. …
7. Fasten the New Handle. …
8. Attach the Chain and Test.

Are all toilet levers universal?

Replacing a Toilet Handle Another way to get the type of handle you need is to purchase one from the manufacturer of your specific toilet. There are also universal handles that will fit almost any toilet, no matter what type of tank lever you currently have.

How do you flush a toilet if the handle is broken?

If your toilet handle is broken or missing, you can still flush your toilet. All that is required is for you to lift the “flapper” at the bottom of the toilet tank. This will release the water down into the bowl, flushing the toilet.

What is a trip lever on a toilet?

The trip lever of a toilet is actually house inside the tank, usually on whichever side the handle is on. This lever is used as a “trip” mechanism, to action the flush valve. … Trip levers are metal or plastic pieces that attach themselves to the flush valve or flapper piece with a chain or a clip component.

Why does my toilet handle keep breaking?

The seal on the flush valve is a rubber ring, and over time it can deteriorate. When it does, it gets harder to break the suction and let the water flow through the valve. Flush valve seals are usually available at hardware or home improvement stores.

Does every toilet have a chain?

Replacing the Toilet Lever Some toilet designs don’t have a lift chain flapper mechanism. They usually have a lever arm that raises a circular disk whose role is to seal the hole at the bottom of the tank during a refill. … The lever arm is often made of plastic.

What if your toilet doesn't have a chain?

If your toilet doesn’t have a chain but it has a flapper, it probably has a lever arm that controls the flapper. … If your toilet has a push button on the top and no flapper, it might be a pressure-assist toilet, such as a Sloane Flushmate.

What if my toilet doesn't have a flapper?

Tower-style flush valves have a round rubber gasket instead of a flapper to keep water in the tank, and during the flush, the entire tower/canister lifts upward to release water down through the tank opening. … An old, stiff flush valve seal can put extra stress on the handle or chain.

Article first time published on

How much does it cost to replace a toilet handle?

The replacement part you need is called a “toilet trip lever” and it includes the handle and swing arm. They retail for under $20, but models for high-end toilets may cost $50 to $100.

Why is my toilet handle so hard to push down?

If the chain is stuck, your toilet handle will feel more difficult to push. Make Sure the Chain is the Right Length. When you flush your toilet, the flapper or seal should rise (about 90 degrees). If the chain is too long, the flapper will only lift a tiny bit or not at all.

Why does toilet sound like its flushing?

A toilet that sounds like it flushes itself is suffering from a leak inside the tank. … A malfunctioning problem in a toilet that’s caused by a faulty part, such as a worn-out flapper valve, or a mechanical problem, such as loose toilet bolts, can cause it to sound as if it is being flushed by an unseen force.

Which side should the toilet lever be on?

Toilet Handle Placement Most toilets have the flush handle on the left side, and it’s most commonly located on the top left corner of the front of the tank. Occasionally, depending on toilet brand and style, the flush handle is on the left side of the tank rather than on its front.

Do you flush the toilet multiple times?

If there isn’t enough water in the tank a poor flush will result. This is likely the culprit if your toilet flushes fine sometimes but requires two flushes other times. There’s a hard water buildup in the bowl. … When too many of the holes clog, your toilet bowl gets an insufficient amount of water when you flush.

Where is the toilet flapper?

The toilet flapper is the component inside your toilet tank that lets water flow out of the tank and into the bowl when you flush. This round, rubber disc is attached to the bottom of the overflow tube, usually by mounting arms that hook onto ears on either side of the overflow tube.

How do I stop my toilet chain from kinking?

Fixing the Problem Adjust a chain that is too long, so that there is the least amount of slack between the trip lever and the flapper. Either remove the chain and cut off the extra links, or move the chain’s connection with the trip lever down, further away from the flapper.

What are the different types of toilet flappers?

There are three main types of toilet flappers: seat disk, tank ball, and rubber.