You may have to factory reset them first. To do so, just press the “on” button 3 times, holding on the third press until the unit begins to blink. Then release and press on the “on” button 3 more times. No need to hold this time.

How do I pair my Lutron Pico remote?

Press and hold the “Off” button on the dimmer/switch you wish to pair the Pico remote to for 6 seconds until the green indicator lights on the unit begin to flash, then release. This will place the device in pairing mode.

How do you unpair a Caseta dimmer?

How do I factory reset my Lutron Caseta dimmer? Rapidly tap the top “on” button three times and on the third tap hold until the lights connected to the switch begin to dim up and down, immediately tap the top “on” button three times rapidly. The connected lights will then alternate dim and bright slowly.

How do you clear Pico?

To un-pair a previously paired Picotap the OFF buttonon the Pico three times, on the third tap hold for 6 seconds and then tap three more times. This will remove all dimmers/switches it was previously paired with.

How do I set my favorite Pico remote?

The favorite button is programmed locally from the Pico remote and not from the Lutron App. Adjust your dimmers levels to the scene you wish to create, then press and hold the favorite button on the Pico for 6 seconds. The dimmers’ LED indicators will flash to confirm the favorite scene has been saved.

How do you reset Lutron homework?

Reset Factory Default performs the same function as a triple-tap, hold, triple-tap (see page 6). To access the Maintenance screen, hold the ON and OFF buttons down simultaneously for 10 seconds, then release. Restoring the Dynamic Keypad to factory settings will remove it from the system and will clear its programming.

How do I reset my Lutron power pack?

A Triple-tap the Toggle button “ u” on the PowPak Dimming Module with 0 –10 V and hold until the LED begins to flash slowly; release button. B Within 3 seconds of the start of flashing, triple-tap the same button again and the LEDs will flash rapidly indicating that the unit has been reset to factory defaults.

How many devices can a Pico remote control?

Thank you for your post! Pico Controls (or other One-Way devices) can transmit to any number of devices with-in the 30ft RF Range. As long as your 18 PowPaks are within 30ft, the Pico should be able to pair to all 18. Hope this helps!

How do you reset Pico dimmer?

You may have to factory reset them first. To do so, just press the “on” button 3 times, holding on the third press until the unit begins to blink. Then release and press on the “on” button 3 more times. No need to hold this time.

Can one pico remote control multiple dimmers?

One Pico remote can be used to control multiple dimmers. The On and Off buttons and the Raise and Lower buttons then control all dimmers connected to the Pico. For example, if you hit the Raise button, all lights get brighter. … The middle button will then recreate that scene when pressed.

Article first time published on

Does Pico remote work with Maestro?

Both Caseta and Maestro come in handy when you want to control the lights in the house. For instance, you can use the Pico remote control with either a Maestro or Caseta.

How do I program my Lutron 4 button remote?

The 4 Group Shade Remote is added and programmed in the same way as a Pico Remote. To do this, go to Settings > Add Device and select the Shade Remote. The app will then tell you which button to push and hold to pair. Once paired, you can name the remote and add it to a room.

What is the middle button on Pico remote?

What is the round middle button for on a Pico remote? This is a favorite button—used to recall a preset level for any light the Pico is controlling. The favorite button is set to 50% (half dimmed) by default.

How do you reset a Lutron Wireless Occupancy Sensor?

Step 1: Quickly triple tap and hold the Test or Light button on the Sensor. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for a few seconds until the dome LED begins to flash slowly (approximately once per second). The Sensor has now been returned to Factory Default Settings.

How do I reset my Lutron processor?

The procedure to OOB is the same as other Lutron devices. Triple-tap, hold until LED blinks quickly, Triple-tap againLED feedback should be blue, magenta?, blue. ? Second triple tap should just get blue blinks. When powering up the processors, it may take up to 1 minute before you can do this triple tap method.

How do I reset my Caseta wireless switch?

How do I factory reset my Lutron Caseta switch? Rapidly tap the top “on” button three times and on the third tap hold until the lights connected to the switch begin to dim up and down, immediately tap the top “on” button three times rapidly. The connected lights will then alternate dim and bright slowly.

Can't connect to Lutron bridge?

All Users: If you are still unable to connect, we recommend that you reset your router by disconnecting the power for 10 seconds. This will restart the bridge. If the Lutron App is still unable to find the bridge, this is most likely because the Bridge and your smart device are not connected to the same network.

How long do Pico remote batteries last?

The Pico is battery- powered, with an industry-leading 10-year battery life.