Place a shingle in position on the upper, working edge of your roofing job, so that it extends past the lower pitch’s edge. Holding the shingle in place with your knees, bend it over the edge of the pitch to sit flat on the upper pitch. Nail it into place. Release the shingle with your knees.

Can you use architectural shingles on a gambrel roof?

A Gambrel or “barn style” roof is one that includes a slope change (or multiple slope changes) on each side of the roof. When installing asphalt shingles on this type of roof, you can proceed as you would with a regular roof.

How do you shingle a roof that is not square?

Start at one edge of the roof and install the first row of cedar or asphalt shingles. The lower edges of the shingles align with the lower edge of the roof. Install cedar shingles with two, 5-penny galvanized box nails. Place each 1 inch from the corresponding edges.

How do you Shingle a barn roof?

1. Step 1: Installing Drip Caps.
2. Step 2: Staple the Felt to the Sheathing.
3. Step 3: Install a Starter Course of Shingles.
4. Step 4: Nail a Row of Full Shingles on Top of the Starter Course.
5. Step 5: Start the Second Row.
6. Step 6: Work Your Way up the Roof.

Can you bend asphalt shingles?

Laminated architectural shingles should, preferably, not be bent over the roof ridge or hips. Only stack a few bundles high, so there’s no risk of them toppling over.

How many layer of shingles can you put on a roof?

Most building codes allow up to two layers of organic or fiberglass asphalt shingles. That limit pertains to roofs with up to a 4:12 pitch. When it’s time to replace your roof, there are several factors that might lead your roofing professional to recommend adding shingles on top of your existing layers.

How do you bend shingles?

Ten or 15 minutes of steaming will soften up shingles. Once they’re soft and you’ve bent them into the shape you want, douse them with cold water and they’ll hold that form.

How many bundles of shingles can you stack on a roof?

A typical bundle weighs 75-80 pounds, which can quickly lead to a lot of pressure if you stack them on top of each other. Another reason to avoid stacking too many is to not risk them toppling over and becoming damaged. If you are using asphalt composite shingles, 9 stacked bundles is probably the limit.

How Long Can shingles sit on roof?

Dimensional shingles come with a 30-year manufacturer warranty. Vented properly and installed correctly, you should get around 80-85% of the life span out of an asphalt roof. That means you can expect to get about 20-22 years out of your 3-tab shingle roof and 25-28 years out of your dimensional shingles.

How do you Shingle a curved roof?

1. Lay tarpaper over the roof. …
2. Begin laying your shingles at the edge of the roof. …
3. Nail three roofing nails evenly along the top edge of each shingle. …
4. Dab a small amount of roofing putty over the head of each nail. …
5. Install the second row of shingles above the first.

Article first time published on

How do you finish the last row of shingles on a shed roof?

1. For the final row, cut shingles into strips.
2. Ensure strips are wide enough to cover nails.
3. Install your strips.
4. Apply sealant over exposed nails on the last strip.
5. Use more sealant along the top edges of all shingle strips.

Does a shed roof need drip edge?

Your shed should be built to withstand the elements. That means repelling water in the most efficient way possible. Installing drip edge around the perimeter of the shed is the best way to keep water out and away from your shed.

Do you need a starter strip for shingles?

The starter strip is crucial because it adheres to the shingles on the edges of your roof and protects them from the elements. Without starter strip shingles, a gust of wind would have no trouble sneaking under the shingles on the edges of your roof and blowing them up, and perhaps even off, your roof.

Where do you put the starter shingles?

Starter shingle should be installed around ALL edges of your roof. To meet code, technically it only needs to be installed on the bottom eaves, but there are some big benefits to installing it up the rake edges as well (also known as gable edges).

How do you join two roof lines?

1. Step 1 – Preparing the Area. …
2. Step 2 – Measuring the Length of the Joined Area. …
3. Step 3 – Prepare a Piece of Flashing Material. …
4. Step 4 – Place the Flashing on the Meeting Point. …
5. Step 5 – Sealing the Edges of The Roof with Lumber. …
6. Step 6 – Apply a Bead of the Sealant Material.

Can you shingle over wet OSB?

Shingles will not adhere properly to wet roof decking like OSB. Keeping water trapped in roof decking can cause the roof to eventually swell or buckle.

Is it OK to lay shingles in the rain?

Installing roof shingles can actually be done even when it is raining. … It is counter-intuitive to be reroofing under the rain since it defeats the purpose of your roof. It’s highly recommended that homeowners should repair and replace their roof during a sunny day and when their roof is dry.

Can you roof in light rain?

Short Answer: Don’t Install a Roof in the Rain But roof installation must happen in dry conditions. Roofing contractors always monitor the weather. They won’t install roofs when it rains because any moisture can sneak in, get trapped, and affect the quality of your roof.

What tool is used to cut shingles?

Tin snips are very sharp, powerful scissors designed to cut through metal, but they can be equally effective for small, complex cuts in shingles. If you need to trim the shingle to fit around pipes or small vents, then tin snips are your best choice.

What do roofers use to cut shingles?

Roofers need utility knives or roofing hook blades for many jobs, including as shingle cutters. If you install 3-tab shingles, you’ll need to cut the shingles in sections to form hip and ridge shingles. No matter which shingle you use, you’ll also need to cut a roof underlayment as well as an ice and water protector.

How far should shingles overhang the rake?

The edge of the shingles should hang over a roof between an inch and an inch and a half — or between a half inch and three-quarters of an inch if drip edge flashing is installed. Too much overhang and the shingles could blow off in high winds; too little can allow water to seep into rake or fascia boards.

Can you sell a house with 3 layers of shingles?

Question: If I have more than one layer of roofing on my home, should I be concerned about resale? The short answer is “yes.”