When installing shingles, start by laying a narrow row of shingles at the bottom of the roof along the edge. Next, lay the first full row of shingles so they’re directly covering the starter row.

Where do you start when roofing?

When installing shingles, start by laying a narrow row of shingles at the bottom of the roof along the edge. Next, lay the first full row of shingles so they’re directly covering the starter row.

What is the pattern for shingles?

The 5-in. -offset pattern provides the best all-around protection. Alignment Guides. Most three-tab asphalt shingles include 1/2-in.

What is a 3 tab roof?

3-tab shingles get their name from the three asphalt tabs on every shingle. They are designed in a single, flat layer, with the three tabs placed evenly apart on the lower edge. These tabs fit together like simple puzzle pieces when the shingles are installed.

Do you need a starter strip for shingles?

The starter strip is crucial because it adheres to the shingles on the edges of your roof and protects them from the elements. Without starter strip shingles, a gust of wind would have no trouble sneaking under the shingles on the edges of your roof and blowing them up, and perhaps even off, your roof.

How many nails should you put in a three tab shingle?

NAILING: Use galvanized (zinc coated) roofing nails, 11 or 12 gauge, with at least 3/8″ diameter heads, long enough to penetrate through plywood or 3/4″ into boards. Use 4 nails per shingle placed 6-1/8″ above the butt edge, 1″ and 13″ in from each end and 1/2″ above each cutout.

How many nails do I need for 3 tab shingles?

A three-tab shingle requires 4 nails per shingle. The amount of tabs does not change the number of nails required to secure the shingle. A 4-tab shingle of the same length will also require 4 nails – the same goes for architectural shingles.

How do you roll with starter shingles?

Simply apply a single course of Starter Shingle Roll along a clean, dry and smooth eave line, after removing the release sheet. Apply the Starter Shingle Roll directly onto the WeatherLock® underlayment or a layer of felt. Once it is pressed into place, you’re ready to begin shingling.

Where do you start shingles on a hip roof?

Apply the first shingle of the first course in the middle of the hip roof. Install the second shingle to the right of the first shingle.

Where does starter strip go on a roof?

Where do they go? Historically, starter strip shingles have been used not only at the lower eave edge of the roof, but experienced professionals also use them at the gable, or rake edges of roofs.

Article first time published on

What is the cheapest style roof to build?

Generally, a gable-style roof with asphalt roofing shingles is one of the most affordable roofs you can build on a residential home. Asphalt shingles typically cost $150-$400 per square foot, excluding installation costs. Simplifying your roof design and lowering its pitch can also help you save money.

Is roofing easy to learn?

Is roofing easy to learn? It is easy to learn the basics of roofing for simpler projects like shingling a shed. However, roofing becomes more challenging and technical for more complex roof designs found on homes. Nevertheless, any skill can be learned through practice and training.

What all is needed for roofing?

• Extension ladder.
• Roof harness (*for safety purposes*)
• Chalk line.
• Caulk gun (for adding sealant)
• Air hose or air compressor (for removing debris)
• Hammer.
• Roofing stapler/nailer.
• Straight edge.

What is the difference between 3-tab and laminate shingles?

3-tab asphalt shingles are made of asphalt, are flat and have a single tab shape and size. Laminate shingles, or “laminated architectural” shingles, are made of a more refined asphalt, have a heavier base mat and multiple material layers.

Why is it called 3-tab shingle?

They are called 3-tab due to each shingle being notched three times to give the appearance of being three shingles when installed. … 3-tab shingles are thinner than architectural shingles, being of a simpler composition and less types of materials. Installation is simple due to the cutout and uniform look.

What is the lifespan of 3-tab shingles?

Their average lifespan is about 18 to 20 years. However, they may last up to 30 years under optimal conditions. When 3-tab shingles are exposed regularly to severe weather, they may last about 7 to 10 years. In areas with mild climates, they may last as long as 12 to 15 years.

What are the measurements for starting shingles?

To lay out the design for the shingles, begin at the bottom of the roof and place a tape measure ½ inch from the edge of the roof to ensure the shingles overhang the drip edge. Mark 12 inches up on the roof for the first course of shingles, then mark every 5 inches all the way up the roof to set your reveal.