Remove the old cord and cut a new cord the same length plus 8 inches. If your cord is missing, the length of cord you need is equal to twice the width of the curtain rod and twice the length of the draw cord, which is the long loop that hangs down the side of the drapes, plus 8 inches.

How do you replace curtain strings?

Remove the old cord and cut a new cord the same length plus 8 inches. If your cord is missing, the length of cord you need is equal to twice the width of the curtain rod and twice the length of the draw cord, which is the long loop that hangs down the side of the drapes, plus 8 inches.

How do you put a glider on a curtain track?

A good way of spacing your gliders and ensuring you have enough prior to adding them to your curtain track is to lay your curtains on the floor or any flat surface. You can then place the gliders just above the curtains allowing you to space them out evenly and count the number of gliders needed along your track.

What are Pull String curtains called?

Traverse curtain rods are a mechanized track system product that allows the user to open or close their curtains with a pull of a string.

Can you restring curtains?

The cord threads around the pulleys and is attached to the master carriers. The master carriers slide across the rod when the cords are pulled, opening or closing the curtains. Although a broken traverse rod is a headache, restringing it is a simple and inexpensive fix.

How do curtain strings work?

Drapery Stacks A typical center-draw traverse rod pulley system operates with four pulleys and a draw cord that opens or closes the drapes — two pulleys are at each corner. … They slide freely, pulled behind the master carrier from the center to the sides, carrying the drapes along the rod.

How do corded curtain tracks work?

Most corded tracks have overlap arms which ensure the curtains meet in the centre without any unsightly gaps allowing light or prying eyes into the room. As the corded system is attached to the overlap arm, the rest of the runners or gliders are free to operate within the same channel.

Are traverse rods out of style?

Are Traverse Rods Out Of Style? Traverse curtains can be difficult to find in stores, but that’s because of demand, not lack of style. This style of curtain has a timeless and sophisticated look that never really goes out of style. However, they are more expensive.

What is curtain rod pocket?

The most classic and common of all methods of hanging curtains, a rod pocket is a sewn-in pocket, or casing, at the top of a curtain panel that easily slips over a rod and conceals it. … And if your curtains are very long, you may not be able to reach the top of the curtain to open and close them.

What's the difference between a drape and a curtain?

Unlike curtains, drapes are usually offered in stiffer, thicker fabrics, and are oftentimes sold custom-sized to fit your exact window dimensions. Due to their thicker construction and custom-design, drapes are considered more formal and luxurious than curtains.

Article first time published on

How do you hang double curtain tracks?

1. Screw Double Brackets to the wall at required height.
2. Loosen the screws underneath the brackets slightly.
3. Insert the back track into the back section of each bracket and snap into place. Tighten the screws as you go.
4. Repeat step 3 to fit the front track into front section of the bracket.

How do you hang curtains with track hooks?

For curtain tracks you will need to insert the hooks into the low or middle row of pockets so that the heading hides the track. For poles insert the hooks into the top row of pockets so that the curtain hangs below the pole. Just make sure you insert the hooks into the pockets rather than onto the cords!

What type of curtain goes on a track?

Pencil pleat curtains can be hung from a track or a pole. Tab top and Eyelet curtains must be hung from a pole. Pinch and Goblet pleat curtains can be hung from a track or pole but as they hang underneath either, to enable the curtains to concertina back properly, the track or pole will be in full view.

How does a curtain pull work?

A drapery puller is a long rod that is used to pull or push draperies open or closed. You simply hold one end in your hand, and the other up at the top of the draperies, then simply slide the drapery back and forth along the rod with the puller.