Tie tie-up shades for a pretty and functional feature that adds a special element to your window coverings. Fold the shades up from the bottom to raise them. For the neatest look, make narrow accordion folds back and forth until you raise the shade to the height you want.

How does a tie shade work?

Tie tie-up shades for a pretty and functional feature that adds a special element to your window coverings. Fold the shades up from the bottom to raise them. For the neatest look, make narrow accordion folds back and forth until you raise the shade to the height you want.

How do you string a balloon shade?

Pull the strings to raise the shades, allowing light and air through the window. Secure the strings to a cord cleat on the side of the window frame to hold the shades up. Release the strings and the shades lower down to cover the window. String balloon shades to install them.

How do you make a tie up Valance?

Pin one strip of ribbon across the width of the fabric 8 inches from the top. Attach another strip of ribbon to the other side of the material so that the ribbons are matched up on opposite sides. Sew the ribbons in place. These will act as an anchor for the valance ties.

How do you tie long curtains?

An option for fixed panels is to drape clear monofilament or twine over the rod, centered directly above each panel, dangling the ends to tieback height or higher or lower, as needed. Wrap one end around the panel, hoist the fabric to the desired height and tie the string ends together to secure the look.

Where do curtain tie backs go?

Hang each tieback hook a third of the way up from the bottom of the curtain. Buffer three inches from the edge of the window. For example, if your curtain is 84 inches long, you would place the tieback about 28 inches from the bottom. A tieback for a 36-inch long cafe curtain would be placed 12 inches from the bottom.

What is a balloon shade?

Definition of balloon shade : a decorative window shade in which the fabric at the bottom of the shade drapes in loose, puffy scallops because two or more points across its width are held higher than the rest of the bottom edge.

How do you hang curtains without a rod?

1. upholstery tacks.
2. tension cables.
3. hook-eye screws and drapery pins.
4. staples and furring strips.
5. cabinet knobs.

How do you tie curtains without putting holes in the wall?

1. Use 3M Command Hooks.
2. Try Kwik-Hang Curtain Rod Brackets.
3. Use Tension Rods.
4. Get Creative With Coat Hooks.
5. Try Magnetic Rods on Metal Doors.

How do I keep my curtains from reaching?

That is done simply by tossing the bottom of the curtain up over the rod and arranging until you’ve got the perfect drape. I like to hide the ends of the curtain behind the rod, but the more traditional swag leaves it out front. It’s up to you! That’s all there is to it!

Article first time published on

How do you make curtains shorter without cutting them?

When curtains appear too long, try sewing a hem, which can allow you to shorten curtains without cutting curtains to length so you can retain the fabric if you want to. Another way of shortening curtains is to incorporate a folded design with buttons as fasteners. Folding the curtain hem up creates a double hem.

How do you stick a balloon to a window?

Run lengths of plastic wrap along the backside of the window. This will hold the balloons in place no matter how deep or shallow the window frame is! This is the trick for creating balloon windows at home. It’s an easy way to push the balloons up against the window without blocking the pretty view from inside.

How many balloons do you need for a balloon wall?

Before assembly, determine how many balloons you will need for the backdrop. As a general rule, Huntington uses about two to three balloons per foot of wall space.

How do you attach curtain tie-backs to fabric?

Hook one end of the fabric or rope tieback to the hook on the right side. Gather the right curtain panel gently in front of the tieback, pulling the free end of the tieback behind and around the panel. Attach the free end of the tieback to the hook. Repeat for the other side.

How do you put fabric on a roller shade?

Line up the top of the fabric shade with the cardboard tube, making sure the roller mechanism is going the right way. Hot-glue the fabric to the tube, running a bead of glue the entire length of the tube. Roll the shade once around the tube and glue again. Roll up the shade.

What is a tie up curtain?

Tie up curtains, similar to London and balloon shades, are opened by pulling the curtain panel up from the bottom instead of drawing panels to the sides of a window. … More elaborate styles of tie-ups include Austrian shades and shirred balloon shades, which have shirred folds that form luxurious scallops when raised.

What is balloon drapery?

Balloon shades are a style of Roman shade that build on the softness of the look desired with their soft pleats and round curves. A Roman shade by definition is most often a fabric shade that is designed to be raised and lowered by a cord.

What is a balloon curtain?

Balloon curtains have an elegant look that dresses up your drab windows with a classic elegance that never goes out of style. This type of curtain has scalloped edges along the bottom when raised to let in light caused by the fullness of the fabric. It is easily adjusted when privacy is desired.

What is a Priscilla curtain?

Priscilla curtains are a style of extra-wide curtain with a frilly, romantic look particularly suited to rustic, French, shabby chic, and country-style decor. Typically white and made from a lacy or sheer material, they have a ruffle that runs along the inner edge and bottom of the curtain.

What is the proper placement of curtain rods?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.

How do you hold curtains back on the rod?

Stick one side of a self-adhesive hook and loop tape dot on the back of a metal rod at the position of each inside edge when in the desired gathered position on stationary panels. Stick the other side of the dot to the inside of the rod pocket of the back side of the drape or the inside of the curtain ring.

Where do you hang curtain rods?

DO Hang High The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.

Do you have to use a drill to hang curtains?

Builders don’t always put wall studs exactly where you need them, so if you’re hanging curtain rods, you’re likely to be doing it on drywall. To keep the rods from pulling out of the wall, you need drywall anchors, and that requires a drill.

How do you hang a curtain rod without studs?

If there isn’t a stud, you need to use a drywall anchor and a screw to reinforce your curtain rod brackets. Without a drywall anchor, a screw won’t be able to hold the weight of your curtain rod. You risk pulling the brackets out of the wall and causing further wall damage.