If your chain does not drop often enough to bother you, no, additional keepers are needed. I like a bash in any case to protect the ring. Should also move your chainline as far inboard as possible.

Is a chain keeper necessary?

If your chain does not drop often enough to bother you, no, additional keepers are needed. I like a bash in any case to protect the ring. Should also move your chainline as far inboard as possible.

Do I need a chain catcher with Di2?

Di2 derailleurs move in such a way that they all but do away w/ the problem, but it can still happen. and it will always happen at the worst possible time. absolutely, for sure… use a chain catcher.

What is the purpose of a chain catcher?

If you’re not familiar with the concept, a chain catcher is a length of aluminium that attaches to your front mech bolt, extending downwards to stop your chain from overshifting inwards. Its job is to get in the way. That’s all.

Do you need a chain guide for 1x10?

Registered. You don’t need a chain guide because it’s a hardtail. The N/W chainring and clutch RD should do the trick. I ride a HT with N/W ring and no dropped chains.

How does a chain guide work?

The chain guide’s job is to keep the chain inline with the teeth on the chainring so that as you continue pedaling, the chain will continue to fall in to place.

How does a chainsaw chain catcher work?

The chain catcher helps prevent the chain being thrown back towards the user, if the chain breaks or becomes derailed. The catcher catches the chain when it derails downwards and shortens it.

What is front derailleur?

The front derailleur is the mechanism that shifts the chain on bike with more than one front chainring. There are many different makes and models, but they all share the same basic design and functionality. Front derailleurs are attached to the bike with either a clamp or bracket.

Should I install a chain catcher?

If installed properly, your chain catcher will make dropped chains a thing of the past, providing extra security when shifting the chain to the small ring. It’s worth the relatively low time and cost to save your frame from damage, and will likely save a ride without you ever even knowing.

How do you make a chain stay protector?

The one we’re showcasing involves attaching a couple of rubber rings to the stay with zip-ties but you can also do something with padded 3M tape, an old inner tube or heat shrink. You can make a simple chainstay protector from a strip of Gaffa tape, which you cut to the length of your stay and neaten up the corners.

Article first time published on

Do you need a chainstay protector on a road bike?

Every road bike must have a chain-stay protector to keep other damages from happening to the chain, the paint, and the bike itself. Chain-stay protectors are designed in such a way that they will help prevent damages from happening to a road bike.

Are chain guards necessary?

In reality, chain guards are an accessory and there is no real exception to this rule. … It is not necessary to install a chain guard on your bike. In saying that if you are commuting to work it could be useful to have a chain guard in to protect your trousers and shoelaces from getting caught on the chain or the gears.

Can you use a front derailleur as a chain guide?

Yep, works fine. You might find the limiter screws aren’t quite long enough to get the mech to where you need it to be.

How does chain catcher work?

A chain catcher is an incredibly simple tool that addresses these issues. They come in a few forms, but they all do the same thing: they stop your chain from falling off the chainring onto the frame. … This thin length of aluminum attaches directly to the front derailleur and extends downwards to prevent chain dropping.

How do you activate chain brakes?

The chain brake is activated when the front hand guard, located near the saw’s upper handle, moves rapidly toward the chainsaw operator. When engaged, the chain brake stops the chain from rotating around the saw’s guide bar.

Do chain guides rub?

Depends on the bike, chainguide, drivetrain and fitting patience/bodgery. Some you can set up silent, some will always rub.

What is a bike chain tensioner?

The chain tensioner attaches to the derailleur hanger and plays the role of a t-pulley stretching the chain and ensuring proper tension. Chain tensioners come with either a push-down or push-up spring.

What are dork disks for?

The Dork Disc is a disc that sits behind the Freewheel or Cassette on the rear tire of a bicycle, it is used to protect the spokes of the rear wheel from the chain coming off the cassette between it and the spokes.