The spanner should be positioned around the nut or bolt. Slide the adjustments to tighten it. Twist the spanner in an anticlockwise direction to tighten a fastener and in a clockwise direction to tighten the fastener. Slide the thumb near the jaw to free the nut by opening the jaw.

How do you use a spanner?

The spanner should be positioned around the nut or bolt. Slide the adjustments to tighten it. Twist the spanner in an anticlockwise direction to tighten a fastener and in a clockwise direction to tighten the fastener. Slide the thumb near the jaw to free the nut by opening the jaw.

Where can you use spanner wrench?

A spanner or wrench is used for turning a nut, bolt or similar fixing that is turned to tighten. The spanner is used to grip the given fixing (whether it is a nut, bolt, concrete screw etc….) and turn it, allowing you to apply torque and tighten the nut onto the bolt.

How do you turn a spanner on?

Slip the open jaw over the nut and hold it in place. Turn the screw mechanism so that it clamps tightly around the nut. Turn the wrench in a clockwise direction to tighten it, or counter-clockwise to loosen it. Keep on turning it until the nut is tight or loose enough to remove.

What is a spanner tool?

wrench, also called spanner, tool, usually operated by hand, for tightening bolts and nuts. … Some wrenches have ends with straight-sided slots that fit over the part being tightened; these tools are known as open-end wrenches and are made in various sizes to fit specific bolt and nut sizes.

How do you know what size spanner you need?

Modern spanner sizes refer to the distance across the flats of the hexagonal nut or bolt they would fit. A 17mm spanner therefore fits a nut 17mm across its flats and this is normally a nut to fit a 10mm diameter bolt (M10).

How do you identify a spanner?

Spanner. The width across flats indicates the “size” of the spanner. It is imprinted on the spanners in millimeter (mm) values. Older British and current US spanners (wrenches) have inch sizes that are imprinted in intermediate sizes in fractions.

What is the most commonly used spanner size?

BA sizes are the most likely to crop up in old electronic equipment and if you are working with this sort of device you may wish to purchase sizes 2BA (jaw size of 8.2mm) and 4BA (jaw size of 6.3mm), as they are the most common.

What do you do if your spanner is too small?

1. Duck tape. Duct tape is useful in almost any situation but you may be surprised to learn that you can use it to loosen bolts. …
2. Two coins. Who would think that money can be used as a makeshift tool? …
3. Zip-tie. …
4. Another nut and bolt.

What is a 10mm spanner?

10mm Metric Chromed Ratchet Gear Spanner Fixed Head Combination Wrench. Tolsen 10mm metric combination wrench with head ratcheting gear spanner is suitable for professional or home mechanic. … It allows for easy access and turning of hard to reach bolts without displacing wrench from the bolt head or nut.

Article first time published on

How do I choose a spanner set?

Thick heads and shafts provide more strength to the wrench and provide better contact with the nut, which means that the nuts will turn easily and the possibility of them getting damaged during the process decreases. On the other hand, wider heads don’t fit small spaces.

Is a wrench and a spanner the same thing?

A spanner is a type of adjustable wrench. Outside of North America, spanner is just another word for “wrench.” If Americans want to ruin something, they “throw a wrench into it.” British people “throw a spanner in the works.”

What is spanner called in USA?

In North American English, wrench is the standard term. The most common shapes are called open-end wrench and box-end wrench. In American English, spanner refers to a specialized wrench with a series of pins or tabs around the circumference.

Whats bigger 3/8 or 10mm?

10mm = just over 3/8 inch. 11mm = almost 7/16 inch. 12mm = almost 15/32 inch (= almost 1/2 inch) … 18mm = just over 11/16 inch.

What is a 9mm wrench in standard?

SAEMetricInch9mm0.3543/8″0.37510mm0.39413/32″0.406

What is 22mm in standard?

Bolt DiameterMetricStandard22mm7/8″5/8″24mm15/16″25mm1″3/4″29mm1-1/8″

Which side do you open a nut?

Typical nuts, screws, bolts, bottle caps, and jar lids are tightened (moved away from the observer) clockwise and loosened (moved towards the observer) counterclockwise in accordance with the right-hand rule.

Can I use pliers instead of a wrench?

A plier tool can be used instead of a wrench sometimes , like to tighten or loosen nuts but this job is better suited for a wrench. Pliers tools tend to damage the corner or the surface of the nuts and it is more difficult to use than a normal sized wrench.

Do you really need an armorer's wrench?

In general, it’s a good idea to have one. The multi-tool wrenches offer quite a lot in a small package. But if you find yourself constantly using one, you may be better suited to buying purpose driven tools. Armorer’s wrenches, also called AR-15 wrenches, can vary in price quite a bit.

What to do if you don't have a hammer?

Flat rock – Rocks with a completely flat edge are more suited to hammering nails into wood, putting furniture together, and driving a chisel. Long flat rock – This type of rock is perfect if you can’t quite reach the thing you need to hammer.