Prime surface with BOYSEN® Acrytex™ Primer #1705.Spray BOYSEN® Acrytex™ Cast #1711 with mortar gun. Press Acrytex™ Cast with wooden roller 10-15 minutes after spraying. … Apply 2-3 coats of BOYSEN® Acrytex™ Topcoat of desired sheen by brush, roller or spray.

What is Acrytex cast for?

DESCRIPTION: BOYSEN® Acrytex™ Cast #1711 is an acrylic solvent-based putty for correction of minor surface imperfections when a plain finish of BOYSEN® Acrytex™ Topcoat is desired. Gives an elegant and durable textured finish when applied with a mortar gun. It is water tight thus can repel water and prevent seepage.

How do you use Boysen primer paint?

SURFACE PREPARATION: If repainting, wire brush or scrape rusted metals and apply BOYSEN® Metal Etching Solution #71 to remove all rust. Let it stay for 10-15 minutes. Be sure to wash off surface thoroughly with water, letting it dry before applying paint. Prime immediately after drying.

What is the use of Acrytex reducer?

It is noted for its excellent adhesion and long-term durability. Creates a very tight film, serving as a moisture sealant for concrete and a stain inhibitor for wood. PRINCIPAL USES: For new and previously Acrytex-Painted exterior and interior masonry, wood and properly primed steel.

How do you use Boysen?

Remove all loose, scaling, flaking and peeling off paint. Remove rust by sanding, wire brushing and as necessary, use BOYSEN® Metal Etching Solution #71 only on the rusted portion. Let it stay for 10-15 minutes. Clean the area then apply a coat of metal primer on treated portions, bare substrate, and chalky areas.

How do you use Boysen permatex?

If a different design is desired, first apply BOYSEN® Permatex™ #3101 with a regular textured roller immediately followed by the desired pattern roller while the paint is still wet and workable. Roll in one uniform direction to impress the design onto the surface.

What is Acrytex tinting color?

DESCRIPTION: BOYSEN® Acrytex™ Tinting Colors are concentrated acrylic solvent based tinting colorants for BOYSEN® Acrytex™ Products. They disperse easily and produce tints from pastel to medium shades with even finishes.

How do you paint metal Boysen?

If repainting, wire brush or scrape rusted metals and apply BOYSEN® Metal Etching Solution #71 to remove all rust. Let it stay for 10-15 minutes. Be sure to wash off surface thoroughly with water, letting it dry before applying paint. Prime immediately after drying.

How do you use Boysen epoxy primer?

Mix three (3) parts of BOYSEN® Epoxy Primer White #2200 to one (1) part of its catalyst. Allow twenty (20) minutes induction time. Dilute 1:1 ratio with BOYSEN® Epoxy Reducer #55. Apply as primer coating on bare concrete.

How do you paint wooden Boysen?

SURFACE PREPARATION: Hammer all nails deep enough to apply putty. Sand rough wood until smooth, then dust off before painting. If repainting, first remove all blistering, peeling and scaling paint by wire brushing or BOYSEN® Paint and Varnish Remover #141. Clean surfaces thoroughly before painting.

Article first time published on

Do you need to prime cement before painting?

Generally speaking, priming is so essential to successful painting outcomes, concrete will always needs a primer. However, the existing surface needs to be primed before painting if: It is unpainted. It is peeling.

How do you use Boysen flat latex?

1. DRY FILM THICKNESS: 1.5 mils.
2. APPLICATION: paint brush, roller, or airless spray.
3. THINNING: Use as supplied. If necessary, thin with not more than ½ liter of clean water per 4-liter can. TINTING: Use only BOYSEN® Latex Colors to achieve pastel. shades.

How do you use Plexibond Boysen?

Slowly mix 6.5-7.5 kilograms of cement to 4-Liters of BOYSEN® Plexibond™ while constantly stirring to prevent lumping. Pass the mixture through a fine strainer to sift out lumpy materials. Ensure intimate mixing, stirring as often as possible to avoid settling. Keep mixture proportion constant for a uniform texture.

How do you use Boysen Wallguard?

PRINCIPAL USES: Use BOYSEN® Wallguard™ as an exterior finish for newly constructed building as well as repainting old structures. OVERCOATING INTERVAL: Allow one hour before recoating. COLORANTS: Use only BOYSEN® Latex Colors for tinting to achieve pastel shades. To produce dark shades, use factory mixed colors.

How do you use Boysen Permacoat?

New Concrete If neutralizing, treat surface with a solution of 1 part BOYSEN® Masonry Neutralizer B-44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting.

What is an Acrytex primer?

Boysen® Acrytex™ is an acrylic solvent-based coating that forms a seamless, non-porous, watertight film that repels water and prevents seepage. It is noted for its excellent adhesion and long-term durability.

How do you use Boysen putty in a concrete wall?

New Concrete If neutralizing, treat surface with a solution of 1 part BOYSEN® Masonry Neutralizer B-44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting.

What is Boysen emulsion?

DESCRIPTION: BOYSEN® Clear Gloss Acrylic Emulsion is an acrylic type transparent coating that acts as a barrier against dampness on concrete walls. PRINCIPAL USES: Improves performance of latex paint applied on humid and/or damp environments.

How do you apply tint color?

A tint is created when you add white to a color and lighten it. It is also sometimes called a pastel color. Tints can range from nearly the full saturation of the hue to practically white. Sometimes artists add a small bit of white to a color to increase its opacity and covering strength.

What is Boysen tinting color?

DESCRIPTION: BOYSEN® Oil Tinting Colors are concentrated alkyd based tinting paints for oil, alkyd and enamel paints. They are used to produce tints from pastel to medium shades. NOTE: To produce dark shades, choose from factory mixed colors or intermix premixed colors to get desired shade.

Can you tint acrylic paint?

If you want to tint, you can use latex or acrylic paint, or tint tubes can be used. A tint tube is a product that changes the color of a base paint by applying a tint. Make sure the latex paint is compatible with the tube by reading the directions.

What is Boysen permatex?

DESCRIPTION: BOYSEN® Permatex™ #3101 is a water-based, full-bodied paint that dries to a fine rubbery coating, creating a beautiful textured finish on interior walls and ceilings bringing elegance to your home interior. It adheres easily on wood, masonry, and drywall surfaces.

What is best paint for plywood?

For plywood projects, water-based acrylic-latex paints are generally the easiest to work with. Epoxy paints also offer great durability. Opt for high-quality paint and apply with a quality brush for the best possible results.

What is latex-based paint?

Latex-based paint refers to a generic term used to classify water-based coating emulsions that are produced with synthetic acrylic binders. They are used as protective coating layers on metallic substrates to prevent corrosion.

How do you paint with epoxy primer?

The epoxy primer should be applied in medium wet coats, allowing a half an hour between each coat at around 70 degrees. One to two coats will render a one millimeter dry film thickness, which is typically enough to be completely effective. Make sure to evenly spray each coat completely across the bare metal surface.

How long does it take for epoxy primer to cure?

Before applying a new coat of epoxy primer or the color coats, the underlying primer coat must be fully dry. On a hot and dry day, or if you’re lucky enough to have an automotive oven, this can take as little as thirty minutes. But on a cold or humid day, it can take up to two or three hours.

What kind of thinner do you use for epoxy primer?

The Epoxy Primer Thinner 200 is used as a thinner for 2-part epoxy coats such as TotalProtect, Aluminum Boat Barrier Coat, and 2-part epoxy primer systems (surfacing, high-build, and clear). In addition to being used as a pre-paint surface prep solvent, it is also used to clean painting equipment and inflatable boats.

How do you apply metal primer?

Wrap Up. Whether you are applying a metal gate paint or a metal door paint, the precautions and steps to be observed remain the same. Clean the metal surface for any dust or grease, eliminate any loose or peeling paint, and get rid of rust. Finally, apply a coating of primer, after which the metal paint can be applied.

Which primer is best for metal?

• Rust-Oleum Professional Primer Spray Paint.
• Rust-Oleum “Stops Rust” Automotive Primer Spray Paint.
• Rust-Oleum Automotive Rusty Metal Primer Spray Paint.
• Rust-Oleum Automotive High Heat Primer Spray Paint.
• Rust-Oleum Automotive 2-in-1 Filler & Sandable Primer Spray Paint.

What is red oxide primer?

Red oxide metal primer acts as a preparatory or protective coating that prevents rust formation on the ferrous metal surfaces exposed to humidity and air. Used for gates, railings, and outdoor equipment the primer is applied to the rusty surfaces before applying a topcoat.

Does primer need plywood before painting?

Plywood, just like any other wood, requires preparation before painting. The quality of the preparation determines the finished quality of the painted surface. … Pour primer into the paint tray until the lower half is full. Roll the roller into the paint and back out to coat the roller with primer.