Each diameter of blue screw requires a specific diameter hole be drilled into the base material. Holes size is critical for the blue screw to have holding values and must be drilled using a hammer drill with a carbide-tipped drill bit that meets ANSI standards.

Do blue concrete screws need a pilot hole?

Each diameter of blue screw requires a specific diameter hole be drilled into the base material. Holes size is critical for the blue screw to have holding values and must be drilled using a hammer drill with a carbide-tipped drill bit that meets ANSI standards.

What is the blue coating on concrete screws?

Tapcon® is the #1 recognized screw anchor brand in the industry. The blue, corrosion-resistant coating enables them to withstand the harshest conditions. And their unmatched performance in concrete, block and brick applications make them an excellent alternative to expansion anchors, plugs and lag shields.

What are blue coated screws used for?

Blue coated anchor screws are used to attach materials to concrete, concrete block or brick.

Do you have to pre drill for concrete screws?

Note that before installing most concrete fasteners, you must first drill a hole with a carbide-tipped masonry bit. … It’s also important to always blow or vacuum out the concrete dust from the hole before inserting the fastener. That’s because concrete fasteners grip much more securely in clean, dust-free holes.

Why are some screws painted blue?

Xylan is a blend of fluoropolymers, engineering plastics and selected corrosion inhibitors which, when combined, create these characteristics in fasteners: Low friction. Exceptional adhesion. Unusual resistance to wear and abrasion.

What drill bit do I use for concrete screws?

TypeDimension (D x L)Type NumberDrill Bit6.5 x 210mmDRILL HSS 6.5MMX210MM6.5 x 260mmDRILL HSS 6.5MMX260MMDrive BitStar T30——-Cap(White)N/ACS CAP WH 0100

Are concrete screws always blue?

These screws have special threading for tapping holes in concrete and typically have a blue coating on them. They are traditionally available in either a Phillips flat head for flush or finishing applications or in a hex washer head for all other applications.

What do blue bolts mean?

The word bolt refers to a lightning bolt (a flash of lightning), and the blue refers to a clear sky (a stormy sky might be grey or black). A bolt from the blue often appears in news stories and other descriptions of unexpected events.

Are Blue Tapcons stainless steel?

Blue Climaseal™ 410 Stainless Steel Brick, Block, Concrete and Masonry Anchor.

Article first time published on

Are Blue Tapcons rust proof?

Original Blue Tapcon® Concrete Screw. The Tapcon® concrete screw with the Climaseal® coating gives excellent rust resistance when used for indoor applications and outdoor applications. … The threads on the concrete screws are a maximum length of 1-3/4”.

What is the blue coating on Tapcons?

Blue Tapcon® Anchors Blue Tapcon®, the nationally bestselling masonry screw, are a standard blue screw which are manufactured by ITW. The blue Climaseal® coating provides extra protection against rust and provides a durable finish that allows for an easy installation.

How do you screw into concrete screws?

The Concrete bolt works much like any bolt. To install, simply drill a whole the same size as the Concrete bolt you are using into your material, ensuring it is both wide and deep enough. Remove any loose dust from the whole, and then screw the Concrete bolt into the space using a socket wrench.

Can I screw directly into concrete?

To put screws in concrete you need special screws, a drill and the right technique. Concrete screws are the only kind of screws that are strong enough to penetrate concrete. … A hammer drill is good for this purpose because you can adjust the depth of the hole so it won’t be too shallow or too deep.

How long should concrete screws be?

Add 1 in. to the thickness of the material you’re attaching to get the minimum length of screw needed. In hard, dense materials like concrete or stone, this minimum 1-in. screw embedment will work fine. But for maximum strength, use longer screws, up to 1-3/4 in.

What size pilot hole do I need for concrete screws?

The average depth to drill your concrete screws is typically ¼ inch deeper than the length of your screw. You should not drill your pilot hole any deeper than ¾ inch to avoid shearing off the head of your screw. However, to ensure a secure fixing the screw should be driven in at a minimum of at least one inch deep.

Do concrete screws need Rawl plugs?

High quality Concrete Anchor External Screws that cuts its own thread directly into pre-drilled 6mm pilot hole, no anchor or plug is needed. Masonry screws are an excellent way to fasten any material to masonry. … These screws can be reversed & reused in the same hole – as it has cut the thread.

Are concrete screws any good?

Using concrete screws is fast and easy—you just drill a hole and screw them in the same as a wood screw. They work great for light- to medium-duty tasks like fastening shelving brackets, plumbing straps, electrical boxes and furring strips. Concrete screws don’t work well on old, crumbling concrete.

How strong is blue threadlocker?

LOCTITE® Blue Threadlocker is medium strength. Again this product cures fully in 24 hours and can be disassembled with hand tools.

How do you release blue Loctite?

Removing threadlocker varies depending on the type you’re working with. For Loctite threadlocker blue, simply remove the bolt and nut with normal tools. Loctite Threadlocker Red 271, is formulated to be a high strength thread locker, meaning it will require the localized heat of a blowtorch to weaken the bond.

Why do Laptop screws have blue paint?

The Locktite used on those screws is to keep them from falling out on their own.

How do you care for blue bolt shrimp?

These shrimp require a water temperature range of 68°-74° F, and pH range of 5.6 to 6.2. Blue Bolt Shrimp will feed off of algae, biofilm, and plant waste that naturally builds up, especially in a planted tank.

What is Whitford Xylan?

Whitford Xylan® coating is a dry film lubricant, designed for use on a number of fasteners and components such as Xylan® coated bolts which help prevent corrosion. PTFE and a number of other types of lubricants are typically used to create Xylan® coatings, these are applied in thin films.

What are Xylan bolts?

Xylan® is a fluoropolymer topcoat, afford high lubricity (co-efficient of friction as low as . 02), and corrosion resistance of approximately 1000 hours when applied over phosphate, and up to 2000 hours when applied over electroplating. It is done to improve Make up and break out torque of bolts.

What Colour are concrete screws?

Concrete screws are most commonly supplied with a blue polymer finish, however they are also available at AFT plain, zinc plated, with a PermaSeal environmental coating, or with a Ruspert corrosion resistant coating.

What color are concrete screws?

The Climaseal coating is blue and is a distinctive product identifier. Most generic concrete screws use a blue color to identify their screw, which can mislead the customers into thinking that the screws are Tapcons.

Are concrete screws good for wood?

Good quality deck screws, sure. Not actual drywall screws. Then, concrete screws are often heavier in diameter and thread depth, so they’ll grab the wood in your studs just fine. Even if they’re lighter-duty 3/16″ screws they’ll be ok if you use enough for the load.

What kind of steel are Tapcons made of?

Stainless Steel Tapcon® concrete screws are manufactured from 410 stainless steel and are magnetic. They are coated with Climaseal® to increase rust resistance and to enhance use in moist atmospheres.

Are Tapcon screws removable?

Tapcon Concrete Screws are removable, however it is not recommended to reuse the same hole because the cutting threads can compromise or destroy the holding power.

Are Tapcons heat resistant?

410 Stainless Tapcon. ® Providing the ultimate in corrosion, rust, stain and temperature resistance, the 410 Stainless Steel Tapcon is the most universal screw for almost any application and provides: Stainless steel finish provides a decorative aesthetic and superior corrosion resistance.

How much weight will a Tapcon screw hold?

SizeMinimum EmbedmentShear (lbs.)3/16”1”7301/4”1”1000