Working in small sections at a time (1–3 boards), use a nylon/polyester brush to dab DeckCorrect™ into cracks and rough areas before rolling. Use a 3/8- inch nap roller to apply a thick, even coat, rolling lengthwise along boards. Allow to dry 4–6 hours before applying second coat. Requires a 2-coat application.

How long does DeckCorrect need to dry before rain?

While latex or water-based stain will be dry in about 4 to 6 hours, your freshly stained deck needs at least 24-48 hours before it rains. Oil-based stains that usually dry in about 12 to 24 hours will require a minimum of 48 hours before the rain.

Is Cabot deck correct a stain or a paint?

DeckCorrect™ is a thick paint great for RESCUING decks, railings, patios, composite deck, pool decks and walkways. It covers and corrects worn, weathered exterior wood and concrete. … Use DeckCorrect™ by Cabot on hard-working, horizontal surfaces and the matching solid color acrylic stain on the verticals.

Do I need to sand before using DeckCorrect?

Sanding is more for the feel of the deck than to prepare it to accept a new stain. … But sanding definitely won’t hurt anything. Ideally, applying a light wood stripper and then pressure washing in a board by board manner is highly recommended to clean the surface and open up the wood grain for staining.

Does Cabot deck correct peel?

shellac, polyurethane and epoxy coatings, are the principal coatings involved when peeling problems occur. To a lesser extent, other products like semi-transparent stains, Cabot Semi-Solid® Stains and Cabot Decking Stains can flake and peel from wood siding or deck structures if these products are over-applied.

How long will Cabot deck correct last?

We could not get more than 1 year out of a solid color deck stain. We used Deck Correct last year and, after 1 year, our deck still looks great. We did take care in prepping the surface, though we did not sand down to bare wood. As you look around, there are a lot of varying reviews on the this product.

How long does it take Cabot deck correct to dry?

Allow to dry 4–6 hours before applying second coat. Requires a 2-coat application. For best results, on vertical surfaces such as railings, Cabot® Solid Color Stain is recommended.

How thick is Cabot deck correct?

DeckCorrect™ by Cabot® covers and corrects worn, weathered, exterior wood and concrete. This thick coating is enhanced with Polycarbonate Everbeads™ to fill cracks up to 1/4″ and lock down splinters for a durable, dirt-resistant, skid-resistant surface.

Can you put Cabot deck correct over paint?

Cabot DeckCorrect needs to be applied in two coats, and it has a relatively thick consistency. A double layer of thick stain isn’t the ideal surface to apply paint over. … You can use Cabot’s Problem Solver Wood Stripper or Problem Solver Wood Cleaner to prep the area before applying your primer and paint.

Is Cabot deck correct water based?

Cabot DeckCorrect Tintable Satin Solid Water-based Mildew Resistant Resurfacer (5-Gallon) in the Waterproofers & Sealers department at Lowes.com.

Article first time published on

How long before you can walk on deck correct?

In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I’d recommend barefoot. After about 4 hours you should be able to safely walk on your deck.

Can you use deck correct over stain?

Yes, it is possible to stain over the existing stain on a deck. It is recommended to do this at least once every 5-15 years, depending on how worn your deck is. However, there are some important steps you must take to ensure the job is done correctly.

Can you use deck correct inside?

Because of their exposure to the elements, exterior deck stains almost always contain fungicides that kill mold, mildew and fungi. These chemicals can be toxic to humans, so the products should not be used on indoor wood floors or furniture.

Is Cabot deck stain any good?

Absolutely the best oil-based deck stain on the market. It penetrates and preserves where applied. I did my large deck completely with 2 coats and the deck still looks brand new. If you want to use the very best then you want to use Cabot’s oil-based stains.

Can I spray deck correct?

With correct tip sizes and pressure levels, virtually any coating in any viscosity range can be spray applied successfully. According to major equipment manufacturers, the quality of a job is most effected when worn spray tips are not replaced.

Is Cabot deck correct acrylic?

Cabot® Solid Acrylic Deck Stain 100% Acrylic finish is also water repellent and fade resistant. Solid Color Stains provide excellent adhesion to new, previously stained or painted surfaces, which are clean and in good condition.

How many square feet does deck correct cover?

On average most deck stains cover 150-300 sq. ft. per gallon depending on the age, condition, and porosity of the wood.

What if it rains before deck stain dries?

If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. … If it rains right after you apply the stain, the stain will peel and flake off. If your stain has been drying for close to 48 hours, this may not happen.

How often do you use deck correct?

Typically, homeowners should restain horizontal surfaces such as decks every two to three years. Poor deck upkeep will decrease the time you have to enjoy the deck before restaining it, while good deck upkeep may give you another year or two before you need to restain the deck.

How many coats of stain should you put on a deck?

The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.

Do you need to apply a sealer after staining a deck?

Most of the time, stains also contain a protective sealant. It’s a good idea, though, to re-seal your deck (or check that it needs to be re-sealed) once a year. Water-based stains can adhere to water or oil-based coatings already present on the wooden surface.