If you have a sand filter and are vacuuming to waste, set filter to “waste” option. … Otherwise, leave setting on “filter” and turn pump on to begin vacuuming. … Vacuum your pool just as you would vacuum your living room, picking up debris or algae as you go.

What setting do I put my sand filter on to vacuum?

1. If you have a sand filter and are vacuuming to waste, set filter to “waste” option. …
2. Otherwise, leave setting on “filter” and turn pump on to begin vacuuming. …
3. Vacuum your pool just as you would vacuum your living room, picking up debris or algae as you go.

How does an automatic pool vacuum work?

Suction side automatic pool cleaners work with the dedicated suction line in your pool, or they can connect to your pool’s skimmer. They use the suction generated by the pool pump to propel the cleaner throughout the pool, vacuuming and cleaning pool surfaces while dirt and debris is removed by the pool filter.

How does a pool vacuum work for above ground pool?

Above ground pool, vacuums and inground cleaners work the same way. Both harness the suction from your pool’s filter system to suck dirt out of the pool. The brush head is used to scrape and scour the dirt, algae, and debris off the underwater surfaces.

Can you use a kreepy krauly in an above ground pool?

The Kreepy Krauly E-Z Vac is designed for above ground pools, but its innovative design is based on the Kreepy Krauly in-ground cleaner.

How do I vacuum my above ground pool with a sand filter?

1. Remove Large Leave or Debris. …
2. Attach the Vacuum Head to the Telescopic Pole and Hose Pipe.
3. Flood the Hose Pipe With Water. …
4. Attach the Hose Pipe to the Skimmer or Dedicated Suction Port. …
5. Vacuum the Pool. …
6. Disconnect the Hose Pipe from the Skimmer or Dedicated Suction Port.

Do you vacuum a pool on backwash or waste?

Don’t use any metal object that can rust as a weight. 8. Vacuuming pool with filter valve in “backwash” position. When a pool is vacuumed with the sand filter valve in the “filter” position, the dirt and debris that passes through the pump ends up inside the filter on top of the bed of sand which is where you want it.

How do you backwash a doughboy de filter?

1. Turn off the pool pump. …
2. Press down lightly on the multiport valve handle and turn to “Backwash.” The handle will drop into place when you push down lightly on it.

How can I vacuum my pool without a skimmer basket?

1. Prime the vacuum. First, prime the vacuum by removing all the air in the system. …
2. Attach to the pump. The vacuum system runs by fixing it to the skimmer inlet that is powered by the suction of the pool system. …
3. Vacuum your swimming pool. It is time to vacuum your Intex pool.

What is the best creepy crawly pool cleaner?

• Our Top Pick. Kreepy Krauly Suction-Side Automatic Inground Pool Cleaner. $337.99. …
• Our Top Pick. Pentair Kreepy Krauly E-Z Vac Suction-Side Above Ground Pool Cleaner. $168.99. …
• Lifetime Extra Large Deck Storage Box. $174.00.

Article first time published on

Can I vacuum my pool on waste?

When your pool has a build-up of very small particles or debris that you don’t want going through your filter (like algae), you can send the debris through the vacuum and directly out of the pool by vacuuming on the “waste” setting.

Why does my pool vacuum have no suction?

If the vacuum doesn’t work, it’s usually either because air is getting into the vacuum hose or into the suction side of the pool pump. The presence of air in the lines is preventing the system from drawing water as it should.

When I vacuum my pool the dirt comes back in?

Poor Filtration. If dirt is reappearing at the bottom of your swimming pool after you’ve vacuumed it your pool’s filter may be working poorly. Pool filters often work poorly because they’re in need of cleaning. If you have a sand filter for your pool you need to make sure that the sand is sharp and freshened up.

What's the difference between backwash and waste?

Drain/Waste: Opting the drain or waste setting will remove pool water without forcing it through the filter. Backwash: This clears out any debris, dirt and other contaminants that may have accumulated on the filter.

How do I get algae off the bottom of my pool without a vacuum?

A nylon or rubber brush is the correct choice for scrubbing the sides of a soft-sided above-ground pool. A large pool brush makes quick work of the job, but you may need a smaller brush to clean corners. Once the particles have been removed from the sides of the pool, turn your filter back on and agitate the water.