The LightKeeper Pro Quick Fix Trigger sends a shaped, electrical pulse through the defective bulb, clearing the shunt. This allows it to operate properly. The current can then flow through the light set completing the circuit and illuminating the other bulbs.

How does Christmas light shunt work?

In incandescent holiday lights, shunts are small wires wrapped beneath the filament. Initially, they are coated with a substance that makes them an insulator. … Now the shunt has gone from an insulator to a conductor, and current passes along shunt, keeping the circuit closed, and the remaining lights burning.

What is the White tipped bulb on Christmas lights?

Re: Christmas tree lights The white tipped bulb is, as has been said earlier, a fuse bulb. Fires get started by faulty tree lights.

How does a bulb shunt work?

In incandescent holiday lights, shunts are small wires wrapped beneath the filament.) If a bulb’s filament breaks, the shunt redirects current through the base of the bulb, maintaining the electrical circuit. … Simply plug in the light strand and remove a bulb that’s in or near the dark section.

How does LightKeeper Pro fix shunt?

The LightKeeper Pro Quick Fix Trigger sends a shaped, electrical pulse through the defective bulb, clearing the shunt. This allows it to operate properly. The current can then flow through the light set completing the circuit and illuminating the other bulbs.

Does light keeper work on LED lights?

No, the LED Keeper uses a different technology specifically developed to perform on LEDs. Fortunately, the LightKeeper Pro is able to fix incandescent holiday lights and has the required technology for these sets.

How do you test a bulb with a LightKeeper Pro?

Place the bulb in the tester making sure the two thin wires of the bulb firmly touch the metal inside the bulb tester. A good bulb will illuminate when its wires touch the contacts of the Bulb Tester.

Why do Christmas lights have 2 fuses?

Typically, these strings of lights have two tiny fuses, one in each side of the AC line, located inside the AC plug. The fuses are intended to melt or “blow” before the copper wires in the string could melt or cause a fire from overload. … Sometimes the instructions with the lights say, for example: “DO NOT OVERLOAD.

How does quick fix trigger work?

Each pull of the Quick Fix Trigger sends a pulse through the set to repair any defective bulbs. Plug the light set into an outlet and the defective section of the light set should now light. If it does not, unplug the light set from the power source and Click 10 additional times.

What are the 3 wires on Christmas lights?

The string of light is designed to daisy chain. The end of one can plug into the start of the next one. The lights are in series between the neutral at one end and the hot at the other end. Thus three wires – hot, neutral, and the series lights.

Article first time published on

Why is a section of my LED lights out?

If one of your LED light strands isn’t working, it’s probably just because it has a bad bulb. If one bulb dies, it can cause the rest of the strand to stop working. The only way to fix the problem is to find the bad bulb. … That means pulling off each bulb, replacing it with a good bulb, and plugging it in.

Why is one section of my Christmas lights out?

If half a strand is working and the other half is not, you probably have a loose or broken bulb. Start with the first unlit bulb and work your way down, wiggling them to check for looseness. If it flickers, that’s your cue to replace it.

How do I know if my Christmas light fuse is blown?

You can sometimes tell by sight if a fuse has blown; the metal filament inside the glass cylinder will have a break in it.

What happens when a bulb fuses?

Hint: When the filament of a bulb is broken then the bulb is said to be fused. When it gets fused it does not emit light. When the bulb gets fused, the electric current is not allowed to pass through the filament and the bulb does not glow because the filament of the bulb is broken.

How can I tell which Christmas light is out without a tester?

Pull out one bulb at a time, and stick a piece of folded up foil into the bulb socket. If the lights come on, you know that’s the bad bulb. If they don’t, put the bulb back in and move on to the next one.

What does it mean to be a keeper of the light?

A lighthouse keeper or lightkeeper is a person responsible for tending and caring for a lighthouse, particularly the light and lens in the days when oil lamps and clockwork mechanisms were used. …

Does the Light Keeper Pro work on icicle lights?

The LightKeeper Pro is a handheld Christmas light repair tool that tests and fixes miniature incandescent light sets, icicle and net light sets, and pre-lit trees and wreaths. … Once you’ve identified the problem, all you have to do is squeeze the LightKeeper Pro’s trigger to fix the majority of incandescent light sets.

How long do pre lit trees last?

Most Americans plan to keep their artificial trees for ten years; however, the average usable lifespan is six years. It’s a good idea to research the company and product quality before making your purchase. Artificial trees can last for years and even come with 1-10-year warranties.

How do you fix LED lights that won't turn on?

1. 1) Confirm that your power supply’s voltage and current rating are compatible with your LED strip. …
2. 2) Confirm that your power supply is working correctly. …
3. 3) Check and isolate other accessories on the same circuit. …
4. 4) Check for any visible loose connections.

Do LED Christmas lights have fuses?

Like the incandescent strings before them, the LED strings have a fuse in series with each side of the AC line, located in the plug. Usually there is a trap-door in the plug to open and access the fuses, or there may be a section that pulls out.

Why did half of my LED lights stop working?

Why? The heat from the LEDs will make the copper traces expand, then contract as they cool down to ambient temperature. So, if there is insufficient “heat sinking”, or “heat radiating” surface area to dissipate the LED heat, the weakest point will fracture with “stress cracks”.

How do you run Christmas lights without blowing fuses?

Plug lights into the nearest outlet or use an extension cord to keep from breaking wires in the lighting strands. For outdoor decoration, plug lights into circuits with a ground fault circuit interrupter (GFCI).

Do all Christmas lights use the same fuse?

Short answer: Yes, most Christmas lights have fuses in the male plug end. If the entire string of Christmas lights has gone out, this is the first thing to check for troubleshooting.

Why do Christmas lights burn out so fast?

If one bulb in a series is defective, loose or missing, the circuit is broken and the series won’t light. … Otherwise the other bulbs have to handle the extra voltage, which can cause them to burn out faster. Lights can also go out if a fuse burns out, but that will darken the whole string.