Don’t cut too far from or too close to the bud you want to encourage. Don’t cut branches flush against the trunk. Don’t cut more than one-fourth of the plant’s height in any one season. Don’t be afraid to prune — your plant actually needs it to remove dead wood and to take on the shape you want.

Why has my electric strimmer stopped working?

The most common problem with a string trimmer is that the unit runs out of string. The string may also be twisted or loose on the spool. … The trimmer may need lubrication and cooling fins or air passages may be blocked. A cordless trimmer’s battery or charger may be faulty.

How do you start a Stihl HL 45?

Stihl HS 45 Starting Instructions Press down the top trigger and then squeeze the bottom trigger and hold them both in position. Press the starting throttle lock on the left side of the handle. Once this button has been pressed, you can release the lock and triggers.

What to do if trimmer is not working?

It is possible that your Trimmer does not turn on or move because it is dirty. There can be hair or dirt particles stuck inside it, causing the cutting unit to be blocked. To fix this problem, properly clean your Trimmer. Remove the cutting unit and clean your Trimmer from the inside as well.

How do you cut a hedge with a ball?

To make ball topiary, trim your hedge into a rough ball shape first, and then take smaller cuts from all angles and keep checking the appearance to work into a round shape. Getting easy access to all sides of the hedge plant is the key to spherical shrubbery success so using potted plants is a smart move for beginners.

When should you not cut hedges?

We recommend avoiding hedge cutting during the main breeding season for nesting birds, which usually runs throughout March to August each year. This can be weather dependent and some birds may nest outside this period, so it is important to always check carefully for active nests prior to cutting.

What month do you trim hedges?

Ideally, hedges should be pruned in late winter, when plants are dormant and haven’t produced buds—particularly if you’re cutting back drastically. “You don’t want them to break bud before you prune because you want the plant’s energy to go toward producing new growth where you want it,” says Roger.

Why does my battery hedge trimmer keep cutting out?

The carburetor might be clogged. A clogged carburetor is most commonly caused by leaving fuel in the hedge trimmer for a long period of time. … This sticky fuel can clog up the carburetor and cause the engine to stall or run roughly. If the carburetor is clogged, try cleaning it with carburetor cleaner.

Is it OK to trim hedges in the summer?

Bushes that flower in the summer bloom on growth from the current growing season. … You can prune these bushes after flowering to improve their shape if you need to; you won’t be removing buds they need for the next growing season, but summer pruning of these shrubs will still decrease foliage growth.

Can electric hedge trimmers be repaired?

With a severed cord, your hedge trimmer is virtually worthless. With a small amount of money and a little ingenuity, however, you can repair the cord and have the trimmer running. If the cord left attached to the trimmer is long enough to be useable, then you simply can add a new plug to its end.

Article first time published on

How do you start a strimmer?

Firmly hold the neck of the strimmer with your left hand and the pull start assembly with your right. The strimmer should start within 3-5 pulls on a new or cold engine. Slowly pull the starting rope with your right hand until you feel the resistance of the rope.

Why does the wire keep snapping on my strimmer?

Usually this is the result of the cutting head being taken too close to objects, e.g. garden stones, paving edges, walls etc. The cutting line must be allowed to rotate freely and the correct diameter and type of line should be used.

Why is my trimmer not cutting?

When your blades start to pull the hair the first thing to try is apply two drops of clipper oil to the blades and test cut again. … If your clipper blades are still pulling the hair, you will need to replace your blades or alternatively have them sharpened.

Why is my hedge trimmer blade not moving?

If the blades of your trimmer become damaged, they may not be able to move freely through their intended path. Sticks, grass and other debris can become caught in the blades and stop them from moving. … Another common issue with hedge trimmer blades are bent teeth.

Why is my nose hair trimmer not working?

If you have confirmed that your Philips Nose Trimmer has a full battery and it is still not working, then it may not be working because it is dirty and the cutting unit is blocked. We advise that you clean your nose trimmer after each use for optimal performance.

How do you adjust the carburetor on a Stihl hedge trimmer?

Turn the high speed screw (H) counterclockwise as far as stop (no more than 3/4 turn). Turn the low speed screw (L) clockwise as far as stop, then turn it back 3/4 turn. *Please note: Do not overturn the screw as this may damage the thread.

Are Stihl hedge trimmers any good?

It’s quiet, comfortable and well balanced and is easy to use, with good safety features. It has a safety lock on the handle and the battery is top loading, with a neutral locking position. The battery is held securely but is not connected so you can safely carry it around the garden and it won’t start accidentally.

What is the gas mixture for a Stihl chainsaw?

Using the right type of fuel is critical in the safe and efficient operation of your STIHL equipment. All STIHL gasoline-powered equipment runs on a 50:1 mixture of gasoline and 2-cycle engine oil. Knowing the proper way to mix your fuel is the first step in keeping it running strong and long.

How do you use a pole Hedger?

1. Clothing and protective equipment. …
2. Lubricate the blade before you start. …
3. Check the ground before you start. …
4. Check the hedge you’re going to trim. …
5. Lay tarpaulin to catch the trimmings. …
6. Grip. …
7. Angle of work. …
8. Stand in one place and trim before moving on.

What is a electric hedge trimmer?

Hedge trimmers are power tools with coarsely toothed, reciprocating blades designed to trim hedges, bushes, shrubs and small branches. They can be electric or gas-powered. … Like battery-powered models, corded electric trimmers are usually lightweight and don’t need batteries and chargers.

How do you hold a hedge trimmer?

Place the trimmer on the ground and hold it tight with your left hand. Use your free hand to start the hedge trimmer without lifting it from the ground. This will keep it steady and under control. If your trimmer features a pull-start engine, do not wrap the starter cord around your hand.

How do you trim overgrown hedges?

1 Use loppers to remove one-third of the older stems, so sunlight can penetrate the hedge’s interior. 2 Find long stems that grow out of hedge, and snip them close to the ground. 3 Where one stem branches into two, cut just above the Y-shaped split. 4 Continue cutting older stems, but leave new growth.

How do you cut hedges without a hedge trimmer?

The tool of choice here is a pair of hand pruners, or even your fingertips. As you cut back the new growth, it will stimulate overall plant growth and give a fuller shape to the shrubs. Even at this stage, though, take some pains to begin trimming back the upper branches a bit shorter than the lower branches.