While the heating times vary between models, when not used continually, most electric models will need about 15-30 minutes for the towel warmer to warm up and an additional 35-45 minutes for the heat to radiate through the layers of towel.

How long does it take to preheat a towel warmer?

Generally, our towel warmers will begin heating as soon as they are switched on, and heat can be felt in 10 minutes. They’ll usually take between 20–40 minutes to reach maximum heat, depending on the air temperature within the room and the size of the towel warmer.

Can towel warmers catch fire?

For instance, if the electric heated towel rack has a 100-Watt element, then it can only put out the equivalent heat of 100 Watts. It can’t just magically produce 200 Watts of heat! So no, your towels absolutely cannot and will not catch fire.

How long does heated towel rail take?

Electric Towel Rails They heat up quickly, getting warm in about 5 minutes and reaching optimum temperature in approximately 30 minutes. Runnings costs are minimal – Thermostatic dry element rails cost as little as 1 cent per hour to run.

How long does it take a towel rail to cool down?

Allow the water inside the towel radiator to cool down for around 20 minutes to ensure you do not run the risk of scalding yourself.

Can you leave heated towel rail on all the time?

Heated towel rails are designed to be left on all the time and there are no safety issues to consider if you decide you want to keep them running. A standard heated towel rail will typically come on and off in accordance with the main central heating system.

Is towel warmer worth it?

They reduce mildew by drying towels more rapidly, keeping them fresher. … Accelerate drying of wet outerwear, such as coats and gloves–making towel warmers worth considering for mudrooms and laundry rooms.

Do heated towel rails use a lot of electricity?

The short answer is, not a lot. Most heated towel rails are very effective in heating and drying your towels. In other words, they don’t use a lot of electricity to perform their job. To provide a bit more detail, the typical heated towel rails consumes 100 to 200 watts of electricity per hour.

Do heated towel rails warm the bathroom?

These towel rails are designed to be as low energy as possible with the sole purpose of warming and drying the towels. This means they are very energy efficient and will do an excellent job in warming and drying the towels but they is not going to add heat to your room.

Can you use a towel warmer as a dryer?

You can also use a towel warmer to dry delicates instead of a dryer. They work well for drying wet shoes, too. Just hang them on a robe hook. Towel warmers can also reduce water consumption and laundry load since you won’t need to wash your towels as frequently.

Article first time published on

How high should a towel warmer be?

Note: • This appliance requires a connection to ground • An accessible all pole disconnection switch is required in the fixed wiring • The heated towel warmer should be mounted vertically with the cord exiting from the base; it should be positioned at least 600mm/2 feet above the floor.

How do you turn the temperature down on a towel heater?

The most common method for adjusting temperature will be to adjust the knob by turning clockwise to turn off – I.e. cool or anti clockwise to open and up the heat. Turning the knob could be difficult, and so pliers might be required.

Does a towel rail need a thermostat?

These type electric towel rails have a silicon sealed wire inside the bars/tubes which heats the towel rail. Generally speaking these towel rails are the easiest to install. … A final note on these dry electric towel rails is that they do not have any built in thermostats which you can control the heat.

Should towel rail valves be fully open?

A standard heated towel rail / towel radiator is designed to come on and off with the central heating system, like any other radiator. If the valve is fully open, the maximum amount of hot water will be entering the radiator and heating up the rail to the temperature set for the whole central-heating system.

How much does a towel warmer cost?

The average cost of a towel warmer is $605 when professionally installed. Affordable plug-in towel warmers start at about $60, and hardwired electric towel warmers start around $200 and go as high as $3000 for some hydronic towel warmers.

Do towel warmers damage towels?

You’ll be amazed by how many people still don’t know the true purpose of a heated towel rail. It’s made to dry your towels, not heat them up – although they will provide a touch of warmth. … If it’s a Bathroom Butler model, it can dry a towel that’s damp after use in as little as four hours.

Do electric towel rails cost a lot to run?

Electric heated towel rails are operated like any other electric heater, being turned on and off with the flick of a switch. These rails avoid the issue of having to switch on the rest of your central heating, however they can be expensive to run due to the power requirements of the heated element within.

Is it expensive to run an electric towel rail?

Using heated towel rails is very affordable. The electrically heated towel rail is an affordable bathroom heating solution. The easiest way to explain the power consumption is to compare the running cost with that of an 80 watt, light bulb.

How much electricity does towel rail use?

You can hold your hand on a towel warmer for 10 seconds or longer, so a towel warmer uses about 5 watts of electricity for that area the size of your hand. Now have to multiply that times the total area of the towel rack, which is about 15x or more larger. So about 75 watts give or take.

Can you put a heated towel rail in a shower?

Zone 1 is the zone above your bath or shower to a height of 2.25m. If you were to install a heated towel rail in this zone, it would need a rating no lower than IPX4. Zone 2 stretches to a 0.6m outside your bath or shower and above your bath or shower if over 2.25m.

How hot should an electric towel rail get?

Towel rails feel very hot to the touch; especially chrome plated ones because they conduct heat very well. We aim to achieve a maximum surface temperature of 65°C on chrome towel rails and 83°C on painted towel rails. If the towel rail gets hotter than the temperatures stated the element might be oversized or faulty.

Is a dual fuel towel rail worth it?

Energy Saving & Cost-Effective Because of this flexibility, dual fuel towel rails are much more cost effective than either a centrally heated radiator, or a towel rail heated solely by electricity. They give you the option to use the most energy-efficient power source whatever the season.

What is the purpose of a towel warmer?

They are used to heat towels or bathrobes so that the user has a warm towel and/or bathrobe when drying off after a shower or leaving the pool, beach or spa. After a towel is used, the towel warmer will dry it out, reducing laundry loads and water consumption, as the towels will not need to be washed as often.

How long is a normal towel?

BATH TOWEL TYPEDIMENSIONS IN INCHESWashcloth12″ x 12″Hand Towels20″ x 30″Bath Towels30″ x 56″Bath Sheets40″ x 70″

How high should you hang a towel hook?

Towel Bars and Rings Standard towel bars should be 42 to 48 inches above the floor. Hotel-style towel racks (which incorporate towel bars and a top shelf and are usually installed above the toilet) should be at least 48 inches above the floor. Towel or robe hooks should be 70 inches above the floor.

How high off the floor should a towel rail be?

Generally speaking, the average height of a towel bar should be 48 inches from the floor. This is also true for the hand towel ring.

How do I make my towel rail hotter?

The most common method for adjusting temperature will be to adjust the knob by turning clockwise to turn off – I.e. cool or anti clockwise to open and up the heat. Turning the knob could be difficult, and so pliers might be required.

What are the two valves on a towel radiator for?

One valve accounts for the amount of hot water that enters the radiator. The other valve, referred to as the lockshield valve, balances the system by regulating how much heat the radiator gives off.

Where are the valves on a towel radiator?

Straight valves should be used when the inlets are at the bottom of the towel rail and the pipes are protruding from the floor. Angled valves will be needed if the water needs to be diverted at a 90-degree angle. This is often the case when pipes and valve inlets are situated at the side of the radiator.

Do electric towel rails have timers?

The electric element allows you to accurately adjust the surface temperature / level of heat of the towel rail and set 24 hour timer programs. …

Do you bleed a radiator when it is on or off?

Turn off your heating. You can’t bleed a radiator when the heating is on, as it may be too hot to touch. You could also get hot water spraying out of the radiator. Use your radiator key to turn the valve at the top of the radiator.