How Much Stain Do I Need For My Deck? For decks and patios that measure up to 175 square feet, you will only need one gallon of stain, in any transparency. If your deck or patio measures up to 550 square feet, you will need to buy 2 gallons of stain.

How much stain do I need for a 12x12 deck?

A 12×12 deck costs $226 to $582 to stain when paying someone, or $59 to $176 to stain it yourself. A gallon of stain costs $20 to $50, which covers 200 to 300 square feet. Get free estimates from deck staining companies near you or view our deck stain cost calculator below. How much will your deck staining cost?

How much stain do I need for a 100 square foot deck?

As far as this calculator goes, if a stain covers 100 sq. ft., and your deck square footage is anywhere between 101-199 sq. ft., it will recommend you buy 2 gallons.

How many square feet will 5 gallons of deck stain cover?

On average most deck stains cover 150-300 sq.ft. per gallon depending on the age, condition, and porosity of the wood.

How much does it cost to stain a 10 x10 deck?

A 10’x10′ deck covers 100 square feet, with a typical staining cost of $300. A 12’x12′ deck covers 144 square feet, costing an average of $432. 8’x10′ works out at 80 square feet, with a final cost of $240. A deck measuring 10’x20′ covers 200 square feet for a typical cost of $600.

How much does a 5 gallon of stain cover?

Different stains offer different coverage, although it is often between 150 and 200 square feet per gallon.

How many sq ft is 12x12?

How many square feet is a 12×12 room? The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).

How much Minwax stain do I need?

Application Tool:natural bristle brush, or clean clothCoverage:150 sq. ft. per quartCoats:1 coat. To darken the color, apply a second coat after 2-4 hours (time dependant on color).Recommended Uses:unfinished wood furniture, woodwork, doors, hardwood floors, cabinets, accessories and trim

How much should I pay to have my deck stained?

The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.

How long does it take for deck stain to dry?

For best results, avoid staining at midday or in direct sunlight. If a second coat is required, wait 4 hours between applications. Depending on temperature and humidity, allow 24 – 48 hours of dry time before using your beautifully restored deck or porch.

Article first time published on

How far does a quart of stain go?

ft/gallon; Rough Sawn Lumber: 150-250 sq. ft/gallon. Polyurethane and varnish- 125-150 sq. ft./qt.

Should I pressure wash deck before staining?

There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.

Do you seal a deck before staining?

Sealers only protect the wood from moisture. … However, green-treated, pressure-treated wood should be allowed to dry out for 30-90 days before applying the first stain. Always make sure the deck is clean and dry before you begin staining. Wait at least 24 hours after washing your deck to apply stain.

Should I seal or stain my deck?

Sealing a deck is best for cedar, teak, mahogany, or other quality woods as it enhances the wood grain and natural color. … Staining a deck protects the wood from mold, mildew, moisture, and rot, and UV rays and sun damage. The stain is available in transparent, semi-transparent, semi-opaque, and solid colors.

How much should I charge to pressure wash and stain a deck?

The average cost to power wash and stain a deck is $2.15 to $4.25 per square foot. Deck painting cost is slightly lower. Total cost is $415 to $925 for decks of average size when a contractor is hired to do the work.

How long does deck stain last?

The best stains should last three to five years on a deck, and even longer if applied to siding or fences, which don’t get as much abuse. “The sun and water beat down on a deck, snow can pile up, and even dirt and mildew spores can settle on the flat surface,” says Rico de Paz, Consumer Reports’ wood stain tester.

What is the square foot of 10x12?

Area of the floor or ceiling: Multiply the length by the width (10 feet x 12 feet = 120 square feet of area).

How many square feet is 24x24?

Tile is 2′ by 2′ or 24″ by 24″ the total square foot is two feet times 2′ feet which equal 4 square feet (ft²). H tile is 2′ by 2′ or 24″ by 24″ the total square foot is two feet times 2′ feet which equals 4 square feet (ft²). , Sceptical enquirer of all things dubious. therefore the tile is 288 square feet in area.

How many square feet is 16x16?

How many square feet is a 16×16 tile? – Quora. One square feet equals 12×12=144 square inches . So for 16×16 tile it’s 256÷144=1.77 square feet.

What is best way to stain a deck?

Deck stains can be applied in several different ways. Using a pump-up garden sprayer and roller are two popular methods. Regardless of how you apply your wood stain, keep a paint brush at hand. A paint brush will work the stain deep in to the pores of a board.

How many square feet does a gallon of deck paint cover?

Determine how much paint you will need to cover the total square footage. You need one gallon of paint for every 300 to 400 square feet. If bare wood is being covered, it will soak up more paint and you’ll get closer to 300 square feet of coverage per gallon.

How much is a gallon of floor stain?

List Price:$89.95 DetailsPrice:$80.00You Save:$9.95 (11%)

How many hours does it take to stain a deck?

While having dry conditions is the best way to ensure you project finishes quickly there are stains that can be applied to a wet surface and dry in 8-12 hours.

How do you bid a deck for staining?

1. Measure the length and width of each section of the deck. …
2. Consider the cost of the deck stain in regards to how much stain you require for the project. …
3. Determine the cost to clean and repair the deck before staining. …
4. Estimate the amount of time you require to clean and stain the deck.

How much does 8 oz of wood stain cover?

Easy to use wood finish covers up to 70 sq. ft. per 8 oz.

What happens if you put too much stain on wood?

If applied too thickly, they won’t dry properly and will remain tacky to the touch. This can also happen if the wood wasn’t stripped and sanded completely down to bare wood, since the stain will sit on the surface rather than soaking into the wood.

How many layers of stain should I put on wood?

2 coats. To deepen the color, apply a third coat. Optional, for additional luster or sheen a clear protective finish can be applied. Recommended finishes include Minwax® Fast-Drying Polyurethane or Minwax® Wipe-On Poly.

Do you need 2 coats of stain on a deck?

The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain. Watch this video to see more tips on how many coats of stain to apply.

Can you apply a second coat of deck stain after 24 hours?

Yes. You can apply an additional coat of stain after 24 hours if you want a darker wood color, especially if the first coat takes longer to dry. Just be sure to apply the stain coat the same way you did the first, and wipe off the excess.

What if it rains 12 hours after staining deck?

If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. … If it rains right after you apply the stain, the stain will peel and flake off. If your stain has been drying for close to 48 hours, this may not happen.

How much does a half pint of stain cover?

Minwax Dark Walnut 2716 Stain – 1/2 Pint Coverage – 400-500 sq. ft.