The cost to have built-in bookshelves installed averages $2,721 or between $1,295 and $4,194 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour. For high end custom work, expect to spend $150 to $1,200 per linear foot.

How much does it cost to do built-in shelving?

The cost to have built-in bookshelves installed averages $2,721 or between $1,295 and $4,194 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour. For high end custom work, expect to spend $150 to $1,200 per linear foot.

Is it cheaper to build or buy shelves?

Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time. Tailored – Making your own allows you to build shelving that meets your exact needs.

Are built-in shelves worth it?

According to Dan Fries, a certified residential appraiser based in Cumming, Georgia, built-in bookshelves can increase a property’s value if they’re made with high quality materials (such as hardwood, rather than medium-density fibreboard) and expert craftsmanship.

How much do shelves cost?

MaterialPrice per Linear Foot (Installed)Plywood$400 – $500Metal$450 – $800Metal and Wood$450 – $1,000Wood$500 – $1,000

How thick should Wood be for shelves?

Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.

How much do built-ins around fireplace cost?

The fireplace built-ins cost depends on the contractor you’re working with to perform the work, as well as where you live. The size of the wall where you’re building the feature also influences the cost of the fireplace built-ins. The average cost ranges from $2,500 to $6,800, according to happystartsathome.com.

How much does it cost to build floating shelves?

Approximate Total Cost: $10 The DIY Wood Floating Shelf can be made for about $10 in materials cost. This is the cost for the wood, wood finish, and other basic supplies. *Note: This doesn’t include smaller things you may already have around the shop, including: glue, sandpaper, etc.

What wood is best for making shelves?

If you are making shelves where the color and grain of the wood is an important part of the design, look for oak, maple, or cherry plywood—these options will still offer durability, but will help keep costs down compared to with non-manufactured hardwoods of the same species.

How much does it cost to put shelves in a closet?

PartPrefab Price (Installed)Custom Price (Installed)Shelving$30 – $200$800 – $2,000Inserts$30 – $90N/ADrawers$45 – $150$250 – $1,000Cabinets$100 – $800$500 – $1,500

Article first time published on

How much do floating shelves cost?

You can buy floating shelves in stores or online for $20 to $80 each. But before you do that, consider building your own. For about the same cost, you can get the exact size, thickness and look you want. You can even finish them to match your trim or furniture.

How deep are living room built-ins?

The base can be fitted with drawers or doors to conceal electronics and accessories. Cabinetmaker Stewart True of True Carpentry and Cabinetry in Cummings, Georgia, says 36 inches is a good height for a base, while 20 to 24 inches is a good depth — deep enough for board games and electronics.

What kind of wood is used for bookshelves?

Pine, birch and oak are three common woods used for building homemade bookshelves. Pine plywood is a lightweight softwood that is inexpensive.

How do you build a built in book shelf?

1. Take Measurements for Your Built-In Bookshelves. …
2. Choose Wood for Your Bookshelves. …
3. Cut the Support Frame, Side Panels and Shelves. …
4. Drill Holes Inside Each Panel. …
5. Paint Wood and Attach Side Panels and Top Shelf. …
6. Attach the Frame Support. …
7. Attach Bottom Shelf and Baseboard.

How long can a shelf be before it sags?

Shelf MaterialMaximum No-Sag Span3/4″ Yellow pine36″1″ Yellow pine48″1-1/2″ Yellow pine64″3/4″ Red oak44″

How much weight will a shelf hold?

Shelf LengthTotal Weight*Per Lineal Ft*1 ft.90902 ft.140703 ft.150504 ft.18045

Is plywood good for shelves?

Plywood is the industry standard for shelving, so it’s a good choice for bookshelves. However, there are a number of sturdy woods with which you can construct bookshelves.

Is plywood stronger than hardwood?

Strength comparison between plywood and solid wood: Solid wood is considered to be stronger compared to plywood since it is a homogeneous material. … Good quality hardwoods (obtained from deciduous trees such as teak or sheesham) are denser, heavier and stronger compared to softwoods such as pine wood or mango wood.

How thick should Plywood be for shelves?

The most common size used in shelving is a 3/4 inch thickness. Cabinetry, furniture, and smaller decorative projects might generally use a combination of 1/2 and 3/4 and occasionally 1/4 inch.

How much does it cost to put shelves in a garage?

Type of ShelvingAverage Costs (Material Only)Wall-Mounted Storage Shelves$50 – $250Add-On Units$75 – $500Freestanding Shelving Units$100 – $1,000

How much should I pay for a closet organizer?

Expect to pay between $80 and $140 an hour, though some organizers offer packages, such as a closet clean-out for $250 or a garage sorting for $350.

What do modular closets cost?

Modular Closets is all about making customizing your closet affordable and easy. You can buy pre-configured closet systems (like the one seen here) from $270 up to $800 and easily shop by the size of your closet.

How much weight can floating shelves hold?

For every stud your bracket is attached to, your floating shelf can hold 50lbs. That means if you’ve got a three foot shelf attached to two studs, your shelf can safely hold 100 lbs. If you’ve got a two foot shelf attached to two studs, the same goes — it can hold 100 lbs.

How do you demo a built in shelf?

Hammer the tip of a pry bar beneath the shelf between it and the cleat. Pry upward to loosen the shelf. Repeat along the length of the shelf and on both sides to free the shelf from the cleats. Remove the shelf from the cabinet.