102 bags per pallet.

How much does Gator dust cover per bag?

22.7 kg (50 lbs) of this product will cover between 1.86 and 2.79 square meters (20 to 30 square feet) if the joints are about 2.5 to 5 cm (1″ to 2″) wide and the natural stones are about 5 to 6 cm (2″ to 2-1/2″) thick.

How long does Gator dust take to harden?

Gator Dust requires 24 hours on a conventional drainage base, it is not for use on overlays.

How much Gator dust do I need?

GATOR DUST is recommended for a variety of uses, including patios, walkways and pool decks. The stones must be installed on a drainage base system: maximum of 1˝ (2.5 cm) of bedding sand, plus a minimum of 6˝ (15 cm) of crushed stone compacted at 98% Proctor density.

What is Gator dust made of?

Gator Dust Bond is a unique mixture of polymer binders and calibrated stone available in Sahara Beige, Stone Grey. Once Gator Dust Bond sets, it becomes very firm and locks between the wet cast or natural stone joints while still retaining flexibility and providing a long lasting, durable jointing material.

How do you use Gator dust?

If you’re using natural stone, sweep the Gator Dust in between the full depth of the joints using a hard-bristle broom. If you’re using wetcast stone, carefully pour the Gator Dust in between the full depth of the joints. Use a scoop to avoid getting any Gator Dust on the wetcast stone surface.

Which Polymeric sand is best?

• BEST OVERALL: DOMINATOR Natural Joint Stabilizing for Pavers.
• BEST BANG FOR THE BUCK: Sakrete Paver Set Joint Sand.
• UPGRADE PICK: Alliance Gator Maxx G2 Intelligent Polymeric Sand.
• BEST FOR SMALL PROJECTS: DOMINATOR Joint Stabilizing for Pavers.

Does Gator dust Harden?

In most cases, if the Gator Dust has not washed out of the joints and appears to be hardening, you’ll probably be ok. If the joints are not hardening, it’s back to square one.

What is the best material to put between flagstone?

Rocks. Small stones, gravel, and crushed gravel are all commonly used as a flagstone filler. They are both a practical and aesthetically pleasing filler solution as they reduce weed growth and bug infestations.

How do you get rid of Gator dust?

A white haze can be removed with efflorescence cleaner or a hot pressure washer. Alliance Gator products do not contain any Portland cement, so any hazing is easily removed and will weather away naturally with time and rain.

Article first time published on

Does polymeric sand get hard?

Polymeric sands have really come along way since their inception in 1999 by Techni Seal. … The sand remains hard when dry and flexible when wet to allow for it to remain intact if the surface moves whether through frost cycles or traffic. It is what makes it a superior product for the filling of joints.

What happens if polymeric sand gets rained on?

After installation, a hard rain on polymeric sand that has not fully set up could result in polymeric sand all over the top of the pavers. … However, once water is applied, any remaining polymeric sand particles will harden and remain on the surface resulting in an unhappy customer.

Is polymeric sand the same as stone dust?

The key difference between polymeric sand and polymeric dust boils down to the size of the joints between the stones. In applications that have larger, natural stones with irregular contours, it can be difficult to create consistent ½” joints. For these jobs, polymeric dust would be the ideal product to use.

How much does a bag of polymeric sand cost?

current productHardscapesSouthwest Boulder & Stone50 lbs. Polymeric Jointing SandEZ Sand 40 lbs. Tan Polymeric Sand40 lbs. Tan Paving Stone Joint Sand Joint Stabilizing Sand for Pavers, Brick, Concrete Blocks & Patio Stones$2398$2830(13)(360)(27)

What can I use instead of polymeric sand?

Builder’s sand is the most common replacement for polymeric sand, as it is easy to access and not expensive. It is used heavily in construction projects, hence its name. Because this sand is very coarse, you will need to use it regularly. You’ll have to reapply it for years as it settles.

Why Your polymeric sand did not harden?

Polymeric sand cures by drying. And in order to fully set, it needs to dry out completely. If your polymeric sand didn’t harden up, it’s pretty much guaranteed there’s a moisture issue. If the joints remain wet after the installation, they will remain soft until they dry.

What do you grout flagstone with?

Mix 3 parts sand to one part portland cement. Slowly add water until your mortar mixture reaches a pasty consistency, similar to peanut butter. Fill a grout bag with your sand and Portland cement mixture. Insert the nozzle of the grout bag into the gaps between your flagstones.

How do you remove polymeric sand from flagstone?

The best way to remove polymeric sand from a paver surface is to use a hot water pressure washer at 180°F. The heat will reactivate the polymers in the product and allow the sand to be stripped away. If it is a smaller area use boiling water.

How far apart should flagstone be?

You don’t want them too far apart so that it feels awkward to walk along your path. Make required adjustments and then begin adding the other stones at one end of the walkway. Position them around the larger stones in the middle to your liking, being sure that the gaps between each stone are around 1″ or 2″.

What is Gator dust?

GATOR DUST BOND is a unique mixture of polymer binders and calibrated stone available in Sahara Beige, Stone Grey. Once GATOR DUST BOND sets, it becomes very firm and locks between the stone joints while still retaining flexibility and providing a long lasting, durable jointing material.

Is polymeric sand better than regular sand?

Polymeric sand is the more reliable and durable option for filling in the paver gaps. It outperforms regular sand when a homeowner is looking to lock the paver joints properly and wants a steady and stable path. It also provides a better appearance with its cleaner look and availability in varied colors.

How long does polymeric sand take to dry?

A minimum of 24 hours drying time is required prior to allowing significant foot traffic and 48 hours for vehicular traffic on the paver surface. Polymeric sands are designed to soften and re-heal.

What is polymeric sand?

Polymeric sand is a material used to fill paver joints, the empty spaces found between each paver, tile or natural stone. It is sometimes called jointing sand, paver sand or hardscape sand. Jointing sand is made up of fine grains, to which manufacturers add a mixture of specific additive particles.

Does polymeric sand stain?

Advantages of Polymeric Sand In fact, there are drawbacks to this product, such as the fact that it can stain your pavers. (To remove the stains, some suggest scrubbing with vinegar.) Nonetheless, the product is superior to regular sand in a variety of ways: It improves durability.

When can I drive on polymeric sand?

Keep away from walks and patios for at least 24 hours. If the pavers are for your driveway, wait 48 hours before driving over them, It’s also best to wait a full 30 days before you try to clean or seal your pavers. They need weeks to fully cure.

How do you cut polymeric sand?

Using a utility knife cut the polymeric sand all around the paver. Then scrape out as much material as possible. Use a paver extractor to wiggle the paver back and forth until the paver can be removed.

How do you remove polymeric sand?

For even better performance, use a hot water pressure washer at 180 ° F. The heat will reactivate the polymers in the product and allow you to strip away the sand. If it’s a smaller paver area, use boiling water.

How do you put polymeric sand on flagstone?

Polymeric sand, or “poly-sand” seemed great at first. As easy to install as regular sand, almost. You simply sweep the material into the flagstone (or other paver) joints, lightly hose down, then it solidifies. Once it dries and hardens, the sand stays in place.

What is stone dust?

Stone dust is finely pulverized stone that has been screened and is typically used as a base material for leveling. Stone dust is easy to grade and once it is compacted, it can be walked directly on while laying stone, pavers or bricks.

Can you top up polymeric sand?

Unfortunately with polymeric sand replacement, you can’t just uproot any weeds and top it up. You have to completely remove all the pre-existing sand in the joints and start fresh. … Secondly, you will have to wait a day while the surface dries before you can reapply your new sand.

Can I use a hand tamper for polymeric sand?

Using a broom, spread sand over the patio and into the gaps between the pavers. … Once you have swept the sand into the paver joints, a hand tamp should be used over the entire paver area in order to “vibrate” the sand further into the joints.