Average cost: $1,500 – $9,000 Hardie board siding costs anywhere from $1 to $6 per square foot of material installed on a home. If you were to replace siding on an average size home of 1,500 square feet, you could expect to pay anywhere from $1,500 to $9,000 in total installation and replacement costs.

How much does Hardie plank cost installed?

Average cost: $1,500 – $9,000 Hardie board siding costs anywhere from $1 to $6 per square foot of material installed on a home. If you were to replace siding on an average size home of 1,500 square feet, you could expect to pay anywhere from $1,500 to $9,000 in total installation and replacement costs.

Does hardiplank add value to home?

James Hardie siding will not only give your home a whole new look and feel; it will also significantly increase its value, as it has consistently been ranked one of the top projects with the highest return on investment by Remodeler Magazine’s Cost vs. Value report.

How much does it cost to side a house with hardiplank?

Hardiplank Siding CostsZip CodeBasicBestInstallation Cost$210.00 – $320.00$420.00 – $540.00Total$610.00 – $880.00$1120.00 – $1350.00Total Average Cost per square foot$7.45$12.35

Is Hardie plank expensive?

You can expect it to be more expensive than vinyl siding, but it’s cheaper to use than brick or stucco and about the same price as other composite sidings. On average, Hardie board siding costs $10 per square foot — so, for example, a 1,200-square-foot exterior wall would cost around $12,000 to install.

How much does it cost to put Hardie board siding on a house?

Hardie Board siding materials cost $3 to $6 per square foot, and the labor cost to install is $3 to $7 per square foot. Old siding removal adds $0.25 to $1 per square foot when residing. Get free estimates from siding contractors near you or view our cost calculator below.

Is Hardie board more expensive than vinyl siding?

Cost. There is no doubt about it, the advantages of hardie board come with a cost. Vinyl siding is far less expensive, both in terms of the product itself and labor costs to install it. Part of the savings stems from the fact that vinyl is much easier to cut, work with, and install.

Does hardiplank have to be painted?

What is Hardie Plank? Hardie Plank is a newer composite material made of concrete substrate. Hardie Plank is also called fiber cement siding. While it’s far heavier than aluminum, vinyl or wood, it is extremely durable and typically only needs a new paint every ten to twenty years for maintenance.

Does Hardie board need waterproofing?

Hardiebacker (James Hardie): the use of a waterproof membrane, vapor barrier or vapor. retarding membrane is optional unless the local building code requires it.

Is Hardie board cheaper than brick?

Material alone, regular Hardi siding runs approximately $1.15/SF where “Artisan” runs $2.40/SF and brick runs anywhere from $2.50-$5.00/SF depending upon the brick you choose. There are six “standard” size brick per SF so this range will allow for an allowance of $0.42 – $0.83 per brick.

Article first time published on

Do you have to Prime Hardie board?

Whether you’ve got a ColorPlus finish or custom paint on your existing Hardie siding, you don’t have to use primer when re-painting Hardie. All you should have to do is rinse your siding (use a garden hose – no pressure washers here!) to clean off any dust or dirt.

What is the average cost of cement board siding?

Siding TypePrice Per Square FootAverage Price EachShingles$2 – $6$2 – $10Panels$2.50 – $15$30 – $500

Is James Hardie siding a good investment?

James Hardie siding looks great and is long-lasting, which offers homeowners an excellent return on investment. According to the 2020 Cost vs. Value report, Indianapolis homeowners who invest in fiber cement siding recoup 80.5% of their investment.

What is better than HardiPlank?

Once the contractors believed in the product, the information was passed to the homeowners, including the following advantages: LP SmartSide has superior moisture protection and strength, longer lengths than Hardie (16′ over 12′), less weight than Hardie, and is less expensive to install (no special cutting tools …

How much does it cost to side a 1500 sq ft house?

An average 1,500 square foot house would cost around $7,700 for standard aluminum siding and upwards of $11,000 for custom grades after labor and material costs.

Do termites eat Hardie board?

Hardie Board siding resists pests including termites and carpenter ants. It’s also woodpecker resistant, so you don’t have to worry about the hassles of repairing termite or woodpecker damage.

What is the difference between hardiplank and Hardie board?

Fiber cement siding is often called “hardiplank” or even “hardie board” named from the most popular brand of fiber cement siding which is manufactured by James Hardie. … It is also installed in much the same way as traditional lapboard or wood siding, as it is nailed directly to your home.

What is cheaper than Hardie?

One of the biggest reasons many builders and homeowners choose LP siding over Hardie siding is the significant cost difference. … LP is cheaper because both the materials and labor cost less than Hardie siding.

Does Hardie board have an R value?

Hardie Plank is a cement board; it’s composition is sand and water. It is heavy on the wall and provides no insulation value. … It has high R-value, some up to 5.3, and has the potential to yield an 80% return on investment due to the increased energy efficiency and lower energy bills.

Can hardiplank be installed over existing siding?

According to the best practices manual from James Hardie, existing siding can be used as a substrate as long as it is in good condition, meaning that it is not warped, bowed, curling, delaminated, or rotting. … If none of these potential problems are present, the existing siding is probably fine to use as the substrate.

Can I install Hardie siding myself?

Fiberboard cement siding can be hand-nailed, but because it’s so much harder and more brittle than wood, you have to predrill holes near any edge. You can save yourself a bunch of time by using a pneumatic coil siding nail gun.

Do you caulk between hardiplank siding?

Wherever Hardie siding meets a trim board, the company recommends you leave a 1/8” gap between the siding and the trim and apply a 3/8” bead of approved caulking to protect and seal the edge of the siding.

Do you need plywood behind Hardie board?

Fiber cement siding should be installed over plywood, OSB, or sheathing. … Building codes will usually require installing siding over water-resistant barriers and nailed into the studs every 16 or 24 inches.

Is Hardie board fireproof?

James Hardie Fire Resistance While James Hardie fiber cement is not considered a fireproof product, it is considered to be fire resistant. James Hardie siding products are non combustible and are considered by many building professionals to be a safer alternative than wood or vinyl siding.

Can you pressure wash HardiPlank?

The manufacturer recommends that you do not pressure wash your Hardie siding. The hard spray of water from the power washer can damage the surface of the siding. In fact, pressure washing fiber cement siding is one of the only ways you can damage this durable type of siding.

Do you paint or stain Hardie board?

Hardiplank siding is a long-lasting, fireproof building material that resembles natural wood. Because it is a concrete-based product, it cannot be stained in the traditional sense.

How long does Hardie board last?

With the proper care, your James Hardie fiber cement siding will outlast its 30-year warranty. It can even last up to 50 years if cared for properly.

How much does a 4x8 sheet of Hardie board weigh?

Hardieplank weighs 2.3 lbs per square foot. That is about the same weight as 5/8″ thick Sheetrock.

How much more expensive is Hardie Artisan siding?

James Hardie Siding Cost Per Square Foot The cost of HardieBoard averages $3 to $5 per square foot for materials alone. Professionally installed, the price increases to $5 to $15a square foot. The artisan collection can hit $25 per square foot with installation.

Should you paint the backside of Hardie board siding?

All sides of the Hardie Board are painted (even the edges) and therefore the entire board is completely sealed. (Although Hardie Board comes from the factory without the back of the board primed, according to James Hardie’s support department, they say you can prime and paint the entire board.)

Can you screw Hardie siding?

HardiePlank® lap siding may be used with fasteners approved by ICC-ES ESR-2290 spaced in accordance with the Wind Load Tables. Fasteners must be corrosion resistant, galvanized or stainless steel. … Fasteners shall be installed between 1 in. and 3/4 in.