Formula multiply the area value by 43560

How much atrazine do you put per acre?

Atrazine 4L’s label recommends applying the product at a rate of 1.5 fl. ozs. per 1,000 square feet in a gallon of water or 4 pints per acre in 15 gallons of water.

How much atrazine do I use on an acre of corn?

*Atrazine applications for corn are restricted to a maximum of 2.5 pounds active ingredient per acre (lb. ai/A) per calendar year. In addition, there is a per-application maximum of no more than 1.6 or 2 lb.

How much does atrazine cost?

Qty Discounts New Price1-3 $57.954-7 $55.958+ $53.95

How long does atrazine last?

How long does atrazine last? Once Atrazine is applied to the weed and soaks into the soil, it can remain there for several days to several months. In most cases, the atrazine will be present in the ground for one growing season. After that, it will be mostly broken down.

How many pounds is a pint of Atrazine?

No 2.0 lb AI postemergence Yes 2.5 lb AI combined from soil and postemergence applications Atrazine 4L contains 0.5 pound active ingredient per pint. Atrazine 4L may be applied either before planting, at planting or after planting at the rate indicated in Table 1.

How much does Atrazine 4L weight per gallon?

Atrazine 4L herbicide contains 4 pounds active ingredient per gallon and 90DF contains 90 percent active ingredient by weight. An oil concentrate such as Superb® hC, or surfactant such as Preference®, is recommended for certain postemergent applications in corn and sorghum.

How fast does atrazine work?

How long it takes to see results from an application of Atrazine can vary somewhat, depending on what type of weeds you are targeting. Typically, Atrazine is a very slow-acting herbicide, and it can take up to 4 to 6 weeks after application to see desired results and death of the target weed.

What is the price of Dicamba?

Qty Discounts New Price1 $129.952-5 $124.9512+ $109.95

Can I spray atrazine on sweet corn?

“Atrazine is the single most widely used herbicide in sweet corn, applied to fields before crop emergence, after crop emergence, or at both times,” Williams said. “Manufacturers of many of the other herbicides recommend tank-mixing with atrazine to increase their products’ effectiveness.”

Article first time published on

What crops can atrazine be used on?

What is atrazine? Atrazine is an herbicide widely used for control of broadleaf and grassy weeds. It is sprayed on row crops such as corn, sorghum and sugarcane, and in some areas is used on residential lawns. It has also been used on highway and railroad rights-of-way.

Can you spray atrazine on corn?

Atrazine can be applied to the soil surface either before or after planting, incorporated into the soil prior to planting, or sprayed on corn and weeds, postemergence.

Why we should not use atrazine?

It’s so dangerous to both people and wildlife that it has been banned by the European Union. Numerous studies have provided overwhelming evidence linking atrazine to significant health concerns including increased risk of prostate cancer and decreased sperm count in men, and a higher risk of breast cancer in women.

Is atrazine bad for trees?

Answer: Hi-Yield Atrazine Weed Killer could damage or kill trees and shrubs, including all the ones listed. It should not be used over rooting area of trees, ornamentals, vegetables or other desirable plants other than indicated established turfgrasses.

What company makes atrazine?

The Syngenta corporation invented the herbicide atrazine and is its primary manufacturer. The corporation is certainly one of atrazine’s most ardent defenders and promoters.

Can Atrazine 4L freeze?

Atrazine 4L: The label makes no mention of storage temperature minimums or maximums. Banvel: The label makes no mention of storage temperature minimums or maximums. Engenia: freezes around 15°F and is stable under conditions of freezing and thawing.

What is the active ingredient in atrazine?

ACTIVE INGREDIENT: Atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine) 41.9% Related compounds 1.1% OTHER INGREDIENTS. 57.0% TOTAL 100.0% This product contains 4 lbs. of atrazine per gallon.

What type of herbicide is atrazine?

Atrazine is a widely used herbicide that can be applied before and after planting to control broadleaf and grassy weeds. Atrazine is a member of the triazine chemical class, which includes simazine and propazine. It is used in primarily in agriculture, with the greatest use on corn, sorghum, and sugarcane.

How much water should I mix with atrazine?

Atrazine Mixing Instructions for Home Use Mix 4.33 ounces of Atrazine per gallon of water. When mixing in a container, pour Atrazine first, followed by water for best results. Apply the mixture to 500 square feet of lawn.

Does atrazine have residual?

Atrazine residue may decrease due to chemical and biological breakdown if samples are stored indoors under warm conditions. Wet soil should be spread out and allowed to partially dry to a workable condition. If the soil is cloddy, crush so the clods are no larger than wheat seed, but do not pulverize.

What is Halex GT?

Halex GT Herbicide is a systemic, postemergence herbicide for contact followed by residual control of weeds in Glyphosate Tolerant (GT) field corn. Halex GT is also a preemergence herbicide for control of weeds in grain sorghum. Halex GT is a combination of the herbicides glyphosate, mesotrione and S-metolachlor.

How much does dicamba cost per acre?

Apply 3 to 50 gallons of diluted spray per treated acre when using ground application equipment or 1 to 10 gallons of diluted spray per treated acre (2 to 20 gallons of diluted spray per acre for preharvest uses) in a water-based carrier when using aerial application equipment.

Can you still buy dicamba?

In order to provide some clarity, the EPA released a cancellation order Monday, which said farmers can use any supply of the herbicides they bought before June 3, but only until July 31. … They cannot sell or distribute dicamba, except to dispose of it.

How much dicamba is in a gallon of water?

For spot and small area applications, use 1 fluid ounce of Dicamba Plus per gallon of water. The mixing rate for Alligare 90 is 2 pints per 100 gallons, or 0.33 ounces per gallon.

When can I mow after atrazine?

Answer: You could mow your grass 2 days before applying Hi-Yield Atrazine Weed Killer and can mow at least 3-4 days after application.

How often can you use atrazine?

This product may be applied during both dormant and growing seasons. Best results are usually obtained when applied in early spring or dormant periods when weeds are small or have not emerged. Do not apply more than two treatments per year.

How long does atrazine last in soil?

Atrazine does not bind well to soil and can easily move in it. It has an average half-life in soil of around 60-75 days.

How do you mix atrazine powder?

1. Mix the required quantity of Atraforce with clean water to form a smooth paste.
2. Pour the paste into the spray tank through a sieve.
3. Add water and keep the mixture in continuous suspension by means of agitation.
4. In general, use 100-200 liters of water per hectare.

What weeds does atrazine control?

Atrazine, when combined with emulsifiable agricultural oil and water is effective against post-emergent weeds. These include morning glory, cocklebur, jimsonweed, lamb’s quarters, pigweed, ragweed, various mustard weeds, buckwheat, purslane, amaranth, Spanish needle, velvetleaf and most grasses.

Can atrazine be used on St Augustine?

Yes, Southern Ag Atrazine Weed Killer for St. Augustine Grasses is able to be used on St. Augustine Floratam lawns. It is both a pre-emergent and post emergent and is best applied when weeds are small or have not yet emerged.

How tall of corn can you spray Callisto on?

HerbicideRate/AMaximum HeightCallisto3 fl oz30” or 8 collars