The typical height for a toe kick is 3.5″, but many of these look a little taller. Increasing the height of the toe kick is one way to give it a little extra prominence and emphasize interesting materials, but keep in mind that you’ll lose a few inches in the height of your lower cabinets.

How far recessed is a toe kick?

Most toe kicks are four inches high and recessed 3 inches, but both methods allow for customization. There are some situations where a higher toe kick is needed and some cabinets don’t need to be as deep.

What is the minimum height of a toe board kickboard?

Toe boards should have a minimum height of 150mm, however typically on tube and fitting scaffold structures toe boards are 225mm scaffold boards.

What Colour should toe kicks be?

To avoid standing out, most toe kicks are painted either black the same color as the cabinets. They are there to serve a practical purpose, after all.

How tall is a kick plate?

Kick Plate Kick Plates are traditionally 6″ or 8″ in height. But as mentioned before, this can be down to personal preference. For a standard-sized door, a 6″ Kick Plate will suffice, but if you have a larger sized door, you should consider something taller like an 8″ Kick Plate.

What type of wood is use for toe kick?

The most common materials used for making toe kicks are laminated wood and paint-grade ¾-inch plywood. For support blocks, you can use cedar shims or plywood blocks.

Is toe kick necessary?

Toe kick spaces are an important element of kitchen design. In fact, any cabinet that you would stand in front of should have one. The purpose of a toe kick is to create a recess for your feet, which allows you to stand closer to the countertop or workspace more comfortably.

Can you paint toe kicks?

Paint your toe kick panels using Glidden paint’s Onyx Black. You will want to match the finish to the finish of your cabinets. Let dry for 24 hours. Finally, fasten your toe kick with velcro, stickies, or nails to the current toe kick.

Do you glue or nail toe kick?

Toe kick is attached with a nail gun or adhesive after the cabinets are installed.

Should an island have a toe kick?

Kitchen islands should have toe kicks on the side with drawers or doors to provide ample room for feet to fit underneath the cabinet. The toe kick helps prevent the cabinet base from being kicked and scuffed and helps you stand closer to the counter which removes pressure from the lower back while working.

Article first time published on

Can you paint kitchen kickboards?

Don’t forget to paint your kickboards too. These take more knocks than the average cupboard door, so you should give these an extra coat of paint. You can also use chalk paints on kitchen cabinets, but you will need to seal with wax or varnish to get the right finish.

Are toe boards a legal requirement?

The Regulations require that, for construction work, handrails have a minimum height of 950 mm, and that any gap between the top rail and any intermediate rail should not exceed 470 mm. The Regulations also require toe boards to be suitable and sufficient (eg a toe board of a minimum 100 mm height would be acceptable).

How do you size a kick plate?

Typically, the recommended kickplate measurement is equal to the width of the door, less two inches. In other words, if your door is 36 inches wide, you would need to install a 34-inch wide door kick plates to ensure accurate and proper sizing.

Why is it called a toe kick?

Whereas previously most standing crafts were done at tables, there developed a need for a work counter to which one could comfortably stand directly adjacent. As the name would suggest, the kick space provides a space in which one’s toes can rest.

What is toe kick apron molding?

The toe kick is the recessed area between the base cabinets and the floor. … Cabinet toe kick enables comfortable use of the entire depth of the counter. Toe kick molding provides the same finished look to the back of the toe kick area as the rest of the cabinets.

Is a plinth a Toekick?

Toe Kick: Also called a plinth by IKEA, this is a narrow strip of plastic that covers up the legs; these serve the same purpose as toe-kick boards found on conventional cabinets.

Do base cabinets need a toe kick?

Some people prefer the look of base cabinets without a toe kick, or an open bottom with legs. While this is fine for storage cabinets like the one below, it isn’t recommended for a kitchen or bathroom. Not only will a cabinet without a toe kick be uncomfortable to work at, but it will quickly get damaged.

Can you remove toe kick from base cabinets?

Use a simple claw hammer and a pry bar to remove the toe kick. … When replacing the flooring or remodeling your base cabinets, it is often necessary to remove the toe kick. Removing the toe kick from base cabinets is a relatively simple matter of prying the boards away from the cabinet.

What are cabinet toe kicks made from?

They’re usually made of paint grade 3/4” plywood and can be assembled in the shop. They’re quick to install and level on site using support blocks made from scrap plywood and cedar shims. This is the preferred method for kicks on the custom cabinets that I deal with everyday.

Do you install toe kicks before or after flooring?

Regardless of what you choose, the established standard for the top of the counter is about 36 inches above the floor. It’s also important to note that, if you’re including toe kick drawers in your kitchen design, put flooring down first to ensure that the bottom drawers can function properly.

How are Kickboards attached?

Add half the thickness of your kickboard material to the above measurement to get your drilling distance. … Remove the kickboard and drill pilot holes for the screws using the line marked out in the previous step. (Drilling two holes per cabinet should be sufficient) Reinsert the kickboard and screw it into place.

Does toe kick go in front of dishwasher?

Place the flat metal toe kick with slotted openings against the bottom front of the Bosch dishwasher. Let the slotted toe kick sit on the floor and rest against the front of the dishwasher.

Do you Miter toe kicks?

Use a miter saw to cut a 45-degree inside miter cut if the end of the toe kick board butts up to another cabinet run. Make a straight, 90-degree cut if cutting a toe kick board for a straight length of cabinets. Fit the toe kick board against the base cabinets.

What is toe kick kitchen?

A toe kick is a notch-shaped recess at the bottom front of a base cabinet. It provides a recess for your feet so you can get slightly closes to the countertop. This improves your balance,and also reduces the fatigue that would result if you were forced to reach across a countertop to work.

What is plinth in kitchen?

Plinths are sometimes referred to as kick board or kick plate and are used to bridge the gap between the floor and the bottom of your cabinets to hide away cabinet legs, cables, and pipes leaving your kitchen to look sleek and tidy.

Do you need skirting boards in kitchen?

It is very easy to treat skirting boards as an afterthought when it comes to interior design, but whether you are completely redesigning your kitchen or just giving it a quick makeover, skirting boards in kitchens should form a fundamental part of the overall design concept.

Why do kitchens have plinths?

Plinth in a kitchen serves a more practical purpose. It is there to hide the feet of the base cabinets and stop any debris from going underneath the cabinets. It also helps to create a more solid-looking and neat finish to a kitchen, connecting the cabinetry to the floor.