To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.

How wide are normal curtains?

Draperies typically cover larger windows in formal living rooms and dens, while curtains with lighter fabrics hang on smaller kitchen and bedroom windows. The most common premade lengths are 63, 84, 95, 108 and 120 inches. Widths vary, but most are 45 inches wide.

What width and drop do curtains come in?

Most curtain designs come in standard drop sizes of 54”, 72”, 90” and 108” so you may have to round up to the nearest size. For example, if you measure your drop and it is 147cm (58”) in length and you wanted your curtains to sit off the floor you would round this up to the 72” drop curtains.

Do curtain panels come in different widths?

The most common sizes would range from 63, 84, 95, 108 and 120. Width size can vary but the most common is at 45-inches. Usually, one curtain panel cannot cover a standard size window. Most of the time, the needed curtain panels would be two or more.

How wide should curtains be for a 36 inch window?

Example: If your window measures 36″ wide (window width x 2 = 72″), you need curtains that will give a minimum width of 72″ or 2 panels for that window. In this case 2 panels will give about 100″ to 120″ of width which will look nice and full. Always round up to the next full number.

What are double width curtains?

The double 2x panels on a standard window are hung wide so that as much window as possible is visible. They would cover the window when it was not open. The double 2x panels are hung wide so that as much window as possible can be seen.

How wide should curtains be for 60 inch window?

For example, for a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.

How many curtain panels do I need for a double window?

In most cases, you will need four panels for a double window. If you want to go for a flat or wispy look, then you can get by with two panels as long as they are wide enough to cover the entire window.

How wide should stationary drapery panels be?

Stationary drapery panels are available in standard or deluxe fullness. Standard fullness is one width of fabric pleated to a width of 17-23 inches. 5 pleats are standard. Deluxe fullness is 1.5 widths of fabric pleated to 19-27 inches.

How much wider should curtains be than the window?

How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.

Article first time published on

How do I measure for ready made curtains?

To calculate the size of curtain you require, the total width of the curtains should be no less than one and a half the width of your window. To achieve a full and luxurious look, we recommend increasing the fullness to double the width of your window.

How far should Curtain Pole extend beyond window?

This can be subjective and is influenced by obstructions around the window area. But as a guide the pole should extend about 15-20cm (6-8in) beyond the window recess on each side. And it should be fitted symmetrically relative to the window opening.

When measuring for curtains What do you measure?

Simply measure from the top of the pole to where you want the curtain to finish at the bottom. We will make the curtain with 3cm of fabric above the top underside of the eyelet where it sits on the pole. We add this automatically so simply measure from the top of your curtain pole.

Can I use 3 curtain panels?

Feed all three panels onto a rod through the upper casing or tabs, making sure all three are right side out. Better Homes & Gardens advises using a curtain rod that is wider than your window.

Do I need one or two curtain panels?

While it may seem logical that curtains should come in sets of two, curtains do not always come in pairs. They most often come in panels. Panels are a single piece of fabric or one curtain. If you want a typical curtain pair, you will need to buy two panels.

How far off the ground should curtains hang?

The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.

How wide should curtains be for 96 inch window?

How Wide Should Curtains Be For A 96-Inch Window? Following the rule of thumb, curtains for a 96-inch window should range between 192 and 240 inches wide. To get a fuller look, aim for 288 inches wide. For decorative curtains, you can pick out something as narrow as 144 inches.

What is the rule of thumb for hanging curtains?

How High to Hang Curtains. A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.

How wide should each panel be?

Most windows require 2-2.5 times the width of the window in drapery panels to fully cover the window when closed. If you are just hanging decorative panels, single width should almost always do the trick as we recommend 1.5 X the width of the window.

How many panels of curtains do I need?

Divide your total by the width of a single curtain panel to get the number of panels you need. ~ Multiply window width by 2.5 to 3 if you want curtains tightly gathered for a full, luxurious look. Divide your total by the width of a single curtain panel to get the number of panels you need.

How wide is drapery fabric?

But how wide is drapery fabric? Most decorator fabrics are 54 inches wide per industry standards, but this may vary slightly. You may also encounter fabrics that are between 50 and 60 inches wide, although those widths are less frequently found.

What do you do when your curtains are not wide enough?

If you would like a fuller curtain, you need to purchase pinch pleat curtains. If your IKEA curtains are pinch pleat, you need to purchase wider curtains. You can then “pinch” more fabric into three or four prong hooks.

How many panels do I need for a 60 window?

For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.

Are curtains measured width by length?

The width will depend on your curtain pole or track, and the length will determine where you want your curtains to end. The most common drops are to the sill, below the sill or to the floor.

What are the different sizes of curtains?

When measuring for curtains, keep in mind that curtains usually come in only a few different lengths: 63 inches, 84 inches, 95 inches, 108 inches, and 120 inches. Tier curtains, which are shorter and generally don’t cover an entire window, are usually either 24 inches or 36 inches long.

How big should a curtain pole be?

We recommend that the track or pole sits 15-20cm above your window, and be wider than your window by 15-20cm on either side. If you have a track or pole already fitted, ensure you measure the full length.

Is it weird to use 4 curtain panels?

no it’s not silly. I have 4 curtains on all of my windows. If it really bothers you, you can always sew two together.

Can you put 4 curtain panels on a window?

If you have a big window make sure to have double-wide panels on both sides of the frame. … Additionally, when the curtains are open they will look really dinky and disproportionate to your grand window. You may have to buy four panels (2 on each side), we do that often.

Can you put multiple curtain panels together?

Place the curtain panels on top of one another, right sides together. Then pin the vertical edges you unpicked together. If your fabric is quite thick you may opt to clip the two panels together instead. If you’re working with patterned panels check that the pattern matches before and after pinning.