BEHR PREMIUM Solid Color Concrete Stain is a durable, water repellent, solid color stain. It is designed to help protect and enhance both interior, exterior, vertical and horizontal, concrete surfaces. This siliconized, 100% acrylic formula, forms a strong, long-lasting opaque film on properly prepared surfaces.

What is the best way to apply stain to concrete?

Use an acid-resistant airless paint sprayer to neatly and evenly apply the stain on the concrete slab. You may also use a paint roller or handheld brush for stain application in smaller areas and tight corners on the slab. Work in sections as needed.

What is the difference between Behr concrete stain and dye?

When it comes to concrete stain vs. dye, the main difference is that a stain will chemically react with the concrete, while a dye will simply permeate the material.

Do you need to seal Behr concrete stain?

For previously coated or weathered surfaces, refer to: Preparation of Coated Surfaces for Semi-Transparent Concrete Stain. Once the surface is cleaned, prepped and has no sealer or coating present, you can apply the stain.

Is it better to stain or paint concrete?

For the ultimate in long-lasting, durable color, choose concrete stain. Because concrete stain doesn’t just sit on the surface of the concrete, but actually penetrates into the pores of the concrete to some degree, your color is not going to peel, chip, or flake.

Can I roll on concrete stain?

Use a roller with extension pole or a sprayer to apply concrete stain over the rest of the surface evenly. Apply first coat evenly, working in one direction. Allow to dry at least 2 hours before applying the second coat.

How long does it take Behr concrete stain to dry?

Coating will dry to touch in hour. Allow first coat to dry for 4 hours before deciding if a second coat is necessary. Make sure that the surface is fully cured before use. Allow 24 hours for light foot traffic.

What colors can you stain concrete?

• Grey concrete stain.
• Black concrete stain.
• White concrete stain.
• Blue concrete stain.
• Brown concrete stain.
• Red concrete stain.
• Terracotta concrete stain.
• Charcoal concrete stain.

How long does concrete stain last?

Few materials have the longevity of concrete. And because stains permeate the concrete to infuse it with permanent color, a stained concrete floor or pavement should last a lifetime when properly maintained (see How to Protect and Maintain Stained Concrete .

Can I use solid deck stain on concrete?

Never apply stain to a concrete surface until you have cleaned it thoroughly, or the stain will not be able to soak into the surface. … You can use most any kind of wood stain to coat concrete as long as you take the proper preparation steps to condition the surface to accept the coating.

Article first time published on

How much does a gallon of concrete stain cover?

On average, acid stains will cover 200 to 400 square feet per gallon, while water based stains will cover slightly more at about 250 to 450 square feet per gallon.

How do you apply Behr semi transparent stain?

Work in small sections lightly saturating the surface and immediately back-brush or use pad applicator to eliminate puddling, remove excess and evenly distribute the stain. Maintain a wet edge when applying. Apply product end-to-end or to board lengths to prevent lap marks.

How do you color concrete after it dries?

Dyes — The most common method of applying dye is to disperse the dye powder in acetone and spray a fine mist over the concrete surface. “Using acetone will cause the dye to dry very quickly which will allow you to introduce more colors if desired and seal the surface right away,” Cline says.

Can old concrete be stained?

Your existing old concrete should be fine to stain, so long as it is not contaminated with glue, paint, oil, grease, sealers, waxes, or anything else that would prevent the stain from soaking into the pores of the concrete.

Is concrete stain a sealer?

About Concrete Stain + Sealer Additionally, it can be used without tint as a stand-alone sealer over bare or stained concrete surfaces. It forms a protective barrier to keep water out, protects against stains, and extends the life of your concrete.

Do you have to sand concrete before staining?

You certainly can sand concrete before applying a stain, but this may not be absolutely necessary. Sanding before staining ensures that the stain penetrates the surface, but this is only necessary if your concrete floor’s surface is otherwise incapable of absorbing liquids. Test concrete to see if sanding is necessary.

Is staining concrete a good idea?

Because stains penetrate into the concrete surface, their color is durable and long-lasting. When applied to properly prepared concrete, the color will not fade, chip, or peel away.

Is stained concrete slippery?

Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer.

Is Behr concrete stain water based?

Behr solid color concrete stain is a durable, water repellent, solid color stain designed to help protect and enhance both exterior and interior, vertical and horizontal concrete surfaces.

Does muriatic acid stain concrete?

The muriatic acid etches the concrete, allowing the color to seep into the concrete. Muriatic acid is commonly recommended to clean and remove rust stains from concrete. It is also the primary component in most concrete-staining products. In these products, the muriatic acid is mixed with a stain color.

Do you need to seal concrete after staining?

Answer: You can wait as long as you want after you stain your floor to seal it. Most customers prefer to keep people and things off their floor after staining. Let the stain or water properly dry from the floor. Be sure and remove any residue left behind if using our acid stain, then apply sealer.

Which is better epoxy or stained concrete?

Concrete Stain vs Epoxy which is better? … While stained or polished flooring require that the slab surface be in very good to excellent condition before treatment, epoxy flooring is attractive and highly effectively even on concrete that is uneven, cracked or otherwise damaged.

What is the difference between concrete stain and acid stain?

The main difference between an acid stain and a water based concrete stain is how they interact with the concrete. Acid stains have a muted more natural coloring. They penetrate into the concrete’s pores and interact with it’s natural coloring.

Can I change the color of my stained concrete?

Since the color comes from a chemical reaction, there is no easy way to change the color of acid stained concrete; you can add another layer of concrete on top and stain this a completely new color, or you can add to the existing stain to deepen it and possibly change the hue slightly.

How do you color concrete?

You can use dyes to color concrete, such as food coloring or fabric dye. The method for coloring concrete this way is to add the dye to the water before mixing it into the dry concrete mix. What is this? Adding a food coloring dye won’t make the concrete color as concentrated as it would with a fabric dye.

Can Minwax stain be used on concrete?

I found a quart of Minwax Early American wood stain that was almost full. I figured I’d try it out so I started in the back corner using a foam brush – I figured the stain would soak into the raw concrete. And it worked beautifully!

Can you use deck paint on concrete?

If your concrete porch and walkways are showing wear and tear, apply an acrylic latex porch and floor paint with a paint roller. … Expect 1-gallon of acrylic latex porch paint to cover up to 400-square feet.

Can brushed concrete be stained?

Each has specific application instructions determined by the manufacturer. For broom finished concrete, a solvent-based or acid-based stain is the most effective at absorbing and should last for about five years.

Can you make your own concrete stain?

There are products on the market that will paint or resurface concrete but to go cheap, use the least expensive oil base stain or paint you can find. Mix the paint/stain with paint thinner in a 50-50 solution. That is one gallon of paint to one gallon of paint thinner.

Is concrete staining cheaper than tile?

Staining a concrete floor typically costs less than tiling. Installing ceramic or porcelain tile costs on average between $15 and $20 per square foot.

How long should Behr stain dry before rain?

Must apply between 35-90˚ F and temperature must stay above 35˚ F for the next 12 hours. Avoid applying in direct sunlight or to hot surfaces. Coating will resist rain after 4 hours. The surface must be completely dry before application.